Overview

We strongly suggest keeping the default firewall on. Here are a few adjustments to make it more secure. Make sure you configure additional changes when you completely understand the benefit of these particular firewall rules.

To see the default firewall rules through the CLI you can type:

/system default-configuration print

Ipv4 firewall

Protect the router itself

  • work withnewconnections to decrease load on a router;
  • createaddress-listfor IP addresses, that are allowed to access your router;
  • enable ICMP access (optionally);
  • drop everything else,log=yesmight be added to log packets that hit the specific rule;
/ip firewall filter add action=accept chain=input comment="default configuration" connection-state=established,related add action=accept chain=input src-address-list=allowed_to_router add action=accept chain=input protocol=icmp add action=drop chain=input /ip firewall address-list add address=192.168.88.2-192.168.88.254 list=allowed_to_router

Protect the LAN devices

We will createaddress-listwith name "not_in_internet" which we will use for the firewall filter rules:

/ip firewall address-list add address=0.0.0.0/8 comment=RFC6890 list=not_in_internet add address=172.16.0.0/12 comment=RFC6890 list=not_in_internet add address=192.168.0.0/16 comment=RFC6890 list=not_in_internet add address=10.0.0.0/8 comment=RFC6890 list=not_in_internet add address=169.254.0.0/16 comment=RFC6890 list=not_in_internet add address=127.0.0.0/8 comment=RFC6890 list=not_in_internet add address=224.0.0.0/4 comment=Multicast list=not_in_internet add address=198.18.0.0/15 comment=RFC6890 list=not_in_internet add address=192.0.0.0/24 comment=RFC6890 list=not_in_internet add address=192.0.2.0/24 comment=RFC6890 list=not_in_internet add address=198.51.100.0/24 comment=RFC6890 list=not_in_internet add address=203.0.113.0/24 comment=RFC6890 list=not_in_internet add address=100.64.0.0/10 comment=RFC6890 list=not_in_internet add address=240.0.0.0/4 comment=RFC6890 list=not_in_internet add address=192.88.99.0/24 comment="6to4 relay Anycast [RFC 3068]" list=not_in_internet

Brief firewall filter rule explanation:

  • packets withconnection-state=established,relatedadded to FastTrack for faster data throughput, firewall will work with new connections only;
  • dropinvalidconnection and log them with prefix "invalid";
  • drop attempts to reach not public addresses from your local network, applyaddress-list=not_in_internetbefore, "bridge" is local network interface, log=yes attempts with prefix "!public_from_LAN";
  • drop incoming packets that are not NAT`ed, ether1 is public interface, log attempts with "!NAT" prefix;
  • jump to ICMP chain to drop unwanted ICMP messages
  • drop incoming packets from the Internet, which are not public IP addresses, ether1 is a public interface, log attempts with prefix "!public";
  • drop packets from LAN that does not have LAN IP, 192.168.88.0/24 is local network used subnet;
= fasttrack-connectio / ip防火墙过滤添加操作n chain=forward comment=FastTrack connection-state=established,related add action=accept chain=forward comment="Established, Related" connection-state=established,related add action=drop chain=forward comment="Drop invalid" connection-state=invalid log=yes log-prefix=invalid add action=drop chain=forward comment="Drop tries to reach not public addresses from LAN" dst-address-list=not_in_internet in-interface=bridge log=yes log-prefix=!public_from_LAN out-interface=!bridge add action=drop chain=forward comment="Drop incoming packets that are not NAT`ted" connection-nat-state=!dstnat connection-state=new in-interface=ether1 log=yes log-prefix=!NAT add action=jump chain=forward protocol=icmp jump-target=icmp comment="jump to ICMP filters" add action=drop chain=forward comment="Drop incoming from internet which is not public IP" in-interface=ether1 log=yes log-prefix=!public src-address-list=not_in_internet add action=drop chain=forward comment="Drop packets from LAN that do not have LAN IP" in-interface=bridge log=yes log-prefix=LAN_!LAN src-address=!192.168.88.0/24

Allow only needed icmp codes in "icmp" chain:

/ip firewall filter add chain=icmp protocol=icmp icmp-options=0:0 action=accept \ comment="echo reply" add chain=icmp protocol=icmp icmp-options=3:0 action=accept \ comment="net unreachable" add chain=icmp protocol=icmp icmp-options=3:1 action=accept \ comment="host unreachable" add chain=icmp protocol=icmp icmp-options=3:4 action=accept \ comment="host unreachable fragmentation required" add chain=icmp protocol=icmp icmp-options=8:0 action=accept \ comment="allow echo request" add chain=icmp protocol=icmp icmp-options=11:0 action=accept \ comment="allow time exceed" add chain=icmp protocol=icmp icmp-options=12:0 action=accept \ comment="allow parameter bad" add chain=icmp action=drop comment="deny all other types"


IPv6 firewall

Protect the router itself

Create an address-list from which you allow access to the device:

/ipv6 firewall address-list add address=fd12:672e:6f65:8899::/64 list=allowed

Brief IPv6 firewall filter rule explanation:

  • work withnewpackets, acceptestablished/relatedpackets;
  • droplink-localaddresses from Internet(public) interface/interface-list;
  • accept access to a router fromlink-localaddresses, acceptmulticastaddresses for management purposes, accept your sourceaddress-listfor router access;
  • drop anything else;
/ipv6 firewall filter add action=accept chain=input comment="allow established and related" connection-state=established,related add chain=input action=accept protocol=icmpv6 comment="accept ICMPv6" add chain=input action=accept protocol=udp port=33434-33534 comment="defconf: accept UDP traceroute" add chain=input action=accept protocol=udp dst-port=546 src-address=fe80::/16 comment="accept DHCPv6-Client prefix delegation." add action=drop chain=input in-interface=sit1 log=yes log-prefix=dropLL_from_public src-address=fe80::/16 add action=accept chain=input comment="allow allowed addresses" src-address-list=allowed add action=drop chain=input /ipv6 firewall address-list add address=fe80::/16 list=allowed add address=xxxx::/48 list=allowed add address=ff02::/16 comment=multicast list=allowed

Protect the LAN devices

Enabled IPv6 puts your clients available for public networks, set proper firewall to protect your customers.

  • acceptestablished/relatedand work withnewpackets;
  • dropinvalidpackets and put prefix for rules;
  • accept ICMP packets;
  • acceptnewconnection from your clients to the Internet;
  • drop everything else.
/ipv6 firewall filter add action=accept chain=forward comment=established,related connection-state=established,related add action=drop chain=forward comment=invalid connection-state=invalid log=yes log-prefix=ipv6,invalid add action=accept chain=forward comment=icmpv6 in-interface=!sit1 protocol=icmpv6 add action=accept chain=forward comment="local network" in-interface=!sit1 src-address-list=allowed add action=drop chain=forward log-prefix=IPV6
  • No labels