What's new in 2.9.24:
*) fixed console crashes on rb500, that were produced by many
scheduler entries;
*) added option to WinBox to not automatically open previous session windows
works only with v2.9.24;
*) improved vrrp (fixed some bugs, added interface setting to addresses);
*) fixed crashing while tracking PPTP connections for NAT;
*) fixed rb500 ether1 - did not restore speed/duplex settings after reboot,
disable,enable was needed;
*) bandwidth-test could crash router with packet sizes < 32;
*) fixed link-monitor=arp when bonding used on WDS interfaces;
*) made roaming handling in AP more liberal to support different
interpretations of 802.11 (for Siemens WL2);
*) fixed memory leak in graphing;
-
-
andreacoppini
Trainer
- Posts: 498
- 加入:
- Location:Malta, Europe
Re: RouterOS 2.9.24 is out
more liberal? You mean it can wave flags and pull down monuments?What's new in 2.9.24:
*) made roaming handling in AP more liberal to support different
interpretations of 802.11 (for Siemens WL2);
Vive le resistance...
think it was ment: Yeah i see your flags and now i understand what are you doing there, we can work together
i think that ppl with problems uzing these siemens devices will understad better
i think that ppl with problems uzing these siemens devices will understad better
Last edited byjaniskon Thu May 18, 2006 6:06 pm, edited 1 time in total.
think this is it, and maybe some minor changes ment not for mentioning hereWhere are the notifications about WinBox???
Mike
Code:Select all
*) added option to WinBox to not automatically open previous session windows works only with v2.9.24;Yes, these change logs make my BP rise sometimes. Should be:think this is it, and maybe some minor changes ment not for mentioning hereWhere are the notifications about WinBox???
Mike
Code:Select all*) added option to WinBox to not automatically open previous session windows works only with v2.9.24;
What's new in 2.9.24:
*) fixed console crashes on rb500, that were produced by many
scheduler entries;
*) added option to WinBox to not automatically open previous session windows
works only with v2.9.24;
*) improved vrrp (fixed some bugs, added interface setting to addresses);
*) fixed crashing while tracking PPTP connections for NAT;
*) fixed rb500 ether1 - did not restore speed/duplex settings after reboot,
disable,enable was needed;
*) bandwidth-test could crash router with packet sizes < 32;
*) fixed link-monitor=arp when bonding used on WDS interfaces;
*) made roaming handling in AP more liberal to support different
interpretations of 802.11 (for Siemens WL2);
*) fixed memory leak in graphing;
*) Updated WinBox to v2.2.10
Once was a time that I thought WinBox was updated when the new dlls were downloaded. Missed a lot of new features that way.
Mike
Demo license expired after install!
Hi,
I have just downloaded and installed the 2.9.24 vers. and after install and reboot, MK just says that the demo license has expired, without working on single second
It's this a known bug ? if so, any work around?
Thanks
I have just downloaded and installed the 2.9.24 vers. and after install and reboot, MK just says that the demo license has expired, without working on single second
It's this a known bug ? if so, any work around?
Thanks
-
-
andreacoppini
Trainer
- Posts: 498
- 加入:
- Location:Malta, Europe
Re: Demo license expired after install!
If you're using a demo license, you cannot upgrade, you will need to install from scratch (or buy a license)Hi,
I have just downloaded and installed the 2.9.24 vers. and after install and reboot, MK just says that the demo license has expired, without working on single second
It's this a known bug ? if so, any work around?
Thanks
Here is the issue..
(I just spent over 2 hrs fixing it..)
You prob have a RB5XX..
You tried to copy the files and reboot but the router did not upgrade..
You DID NOT look at the logs and see that the upgrade time had expired
(Neither did I)
You performed a NetInstall upgrade / install and selected to keep the current config..
The router did as it was told.. the Lic. showed as "expired" and the router showed a version that was installed past its installation limit and shut its self down..
Here is the fix..
Renew your license.
Store the resulting text string as a file the machine performing the reinstall.
Boot the RB5XX into "monitor" and perform an ethernet boot to connect to the netinstall server.
Point the lic. text box to the licenst file you created earlyer.
BE SURE TO SELECT "KEEP PREVIOUSE SETTINGS" CHECK BOX OR YOU WILL REGRET IT.
Perform the upgrade.
All done...
Elapsed time with all issues of connectivity etc.... Over 2Hrs...
Experiance for next time and to help others who dont want to bang their head against the wall for an extended time..... PRICELES....
Craig
(I just spent over 2 hrs fixing it..)
You prob have a RB5XX..
You tried to copy the files and reboot but the router did not upgrade..
You DID NOT look at the logs and see that the upgrade time had expired
(Neither did I)
You performed a NetInstall upgrade / install and selected to keep the current config..
The router did as it was told.. the Lic. showed as "expired" and the router showed a version that was installed past its installation limit and shut its self down..
Here is the fix..
Renew your license.
Store the resulting text string as a file the machine performing the reinstall.
Boot the RB5XX into "monitor" and perform an ethernet boot to connect to the netinstall server.
Point the lic. text box to the licenst file you created earlyer.
BE SURE TO SELECT "KEEP PREVIOUSE SETTINGS" CHECK BOX OR YOU WILL REGRET IT.
Perform the upgrade.
All done...
Elapsed time with all issues of connectivity etc.... Over 2Hrs...
Experiance for next time and to help others who dont want to bang their head against the wall for an extended time..... PRICELES....
Craig
Stil doesn't install
I still can't install 2.9.24:
1) I did a clean local install and say that don't keep the configuration.
2) MT format the disk and installed correctly.
3) After reboot, complete the install, generate the ssh keys and ... demo license expired please reinstall
Any idea about ?
Thanks
1) I did a clean local install and say that don't keep the configuration.
2) MT format the disk and installed correctly.
3) After reboot, complete the install, generate the ssh keys and ... demo license expired please reinstall
Any idea about ?
Thanks
边界网关协议设置w /例行检验不会没有复述tribute connected, in version 2.8.28 w/ regular routing, filtering won't work correctlywhatd do you want fixed?still no bgp fixes, damn :(
redistribute inject into bgp cause bgp origin=incomplete
and sometimes routing table screwed!
bgp can't see if peers refreshed...
another problem :
state=established, prefix=180000+, but no routes in routing table???
even there is routes in routing table, ping timeout, reboot router fix this problem
supout.rif already sent!
Hellowhatd do you want fixed?still no bgp fixes, damn
嗯,失踪的边界网关协议可以repla网络命令ced -in a way- by enabling the "redistribute static" in the bgp instance settings
and by installing a static route manually that should point in a local interface.
By making this we should filter properly our routes.
It's a fact that the routing-test from 2.9.20 and up has been greatly improved.
In fact it outperfrom the stable routing package.
However there is a major problem in the bgp update process.
In some circumstances bgp removes succesfully a route as is suposed to do, but it does not inform correctly other bgp neighbors.
The only way to uninstall the invalid routes from the other neighbors is by disabling/enabling the bgp instance in them.
In any case the bgp timers was set in a value bigger then zero because in the past we were having problems when they left in 0.
This situation was tested and replicated succesfully in our wireless network in several routers in Athens (http://www.awmn.net).
Thanks in advance
Here is an example of a stucked AS path (2.9.24 routing-test).
The bgp router from which this info has extracted, is having link with bgp routers 45 and 3757.
The bgp router 45 does not have this route in his routing table.
The network 10.94.141.0/24 actually is down but its stuck on some routers bgp table
and comming in to my router from the bgp neighbor 3757.
This produces invalid path information in the routing table and its just a small example of the problem.
There is also a supout availlable.
Code:Select all
routing bgp instance> print Flags: X - disabled 0 name="default" as=1286 router-id=10.17.119.1 redistribute-static=yes redistribute-connected=no redistribute-rip=no redistribute-ospf=no redistribute-other-bgp=no out-filter="" client-to-client-reflection=no
Code:Select all
Destination: 10.94.141.0/24 BGP AS Path: 3757,4790,2379,913,410,3180,3170,2801,2804,38,941,199,3329,2315,1,2615,5023,45,8580,65141The bgp router 45 does not have this route in his routing table.
The network 10.94.141.0/24 actually is down but its stuck on some routers bgp table
and comming in to my router from the bgp neighbor 3757.
This produces invalid path information in the routing table and its just a small example of the problem.
There is also a supout availlable.
Just to let you know that this issue still seems to be there in the CF image. Copied the image to CF then installed on a WRAP and got the license expired message. Install 2.9.23 then upgrade to 2.9.24 works fine.no, janisk, the problem was not with upgrade, but with clean install. please re-download the CD installation ISO, we have fixed the issue. the new ISO will be online in 3 minutes.
但它仍然不´t work