The general topology is LAN <--> RB450G <--> ISP with a PPPoE connection to the ISP. Let the IP provided by the PPPoE server be XXX.XXX.XXX.XXX. I've created dst-nat rules so that external XXX.XXX.XXX.XXX:PORT requests get redirected to an internal server. I've verified that Http connection requests to XXX.XXX.XXX.XXX:PORT from the ISP side of the RB450G work correctly. I'm trying to establish an http connection to XXX.XXX.XXX.XXX:PORT from the LAN side of the router and want the request to be routed to the ISP and then be a connection request from the ISP. But the packet moves from Preroute to Input instead of moving to Forward. The following log entries show this.
Code:Select all
echo: firewall,info input: in:ether3-LAN out:(none), proto TCP (SYN), 192.168.1.25 :49217->XXX.XXX.XXX.XXX:PORT, len 48 echo: firewall,info output: in:(none) out:ether3-LAN, proto TCP (ACK,RST), XXX.XXX.XXX.XXX:PORT->192.168.1.25:49217, len 40/IP ROUTE looks like.
Code:Select all
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 ADS 0.0.0.0/0 10.0.6.1 1 1 ADC 10.0.6.1/32 XXX.XXX.XXX.XXX pppoe 0 2 ADC 192.168.1.0/24 192.168.1.2 ether3-LAN 0
ORT gets moved from Preroute to Forward.可以anyone tell me how to do this?
