Hi,

Please see my topology in pictureYesterday, mikrotik which act as Station Pseudobridge was hit by lightning. The wireless still connected, but I could not ping client's PC behind that mikrotik.

The problem is, after that all of my network was down. And MY PC (windows) which connected to Un-Manage Switch shows popup that said about IP Conflict.
This problem was solved after I disabled wlan1 interface in AP Bridge which connected to Station Pseudobridge.

My questions are:
1. Why windows said IP Conflict and why my whole network down ?
2. How to prevent this IP Conflict issue ?


Thanks in advance.

Please anyone can help me ?

Thanks

The most common IP conflict I experience is 192.168.88.1. Is that ip assigned to more than one interface in your setup? Check all ether1 interfaces on the RouterBoards.

The most common IP conflict I experience is 192.168.88.1. Is that ip assigned to more than one interface in your setup? Check all ether1 interfaces on the RouterBoards.

I am sure there are no same IP in my network. I always changed default IP from any device, before plug into my network.

Anyway, thanks for your reply.

maybe the storm forced a device to go back to default

does any of your clients have any ZIO access points in your network? they've given me a lot of trouble... I don't know what happens to them but after a while they start to take any IP they find in the network and the only solution is to give them to a recycling company

Hy guys!
有人解决这个问题吗?我有遇到相同的问题lem on bridge network where there are 80/90 Mikrotik client (all station pseudobridge) and 2/3 mikrotik that act as ap-bridge.

I try to upgrade router os on client that freeze entire network, but problem is the same; i try to change radio MAC ADDRES but nothing. The only way to resolve problem is disconnect client or change it with another one.

Pleas help me

Best regards

Hmmm...so not only me have this problem.
I hope Mikrotik Team can solve this issue in the next version.

在RouterOS我也觉得有问题,但我tl雷竞技ry to upgrade to version 4.10 and 4.11 client that generate this problem but nothing.
I also try to change MAC ADDRESS of wlan1 but nothing.
The only way to resolve problem is change mikrotik client with another one.

I have this problem three time in the last month.

I hope that someone help us.

Best regards

在RouterOS我也觉得有问题,但我tl雷竞技ry to upgrade to version 4.10 and 4.11 client that generate this problem but nothing.
I also try to change MAC ADDRESS of wlan1 but nothing.
The only way to resolve problem is change mikrotik client with another one.

I have this problem three time in the last month.

I hope that someone help us.

Best regards

Just a tip, if you change (clone) a mac address, let all the routers (Bridged network!) erase or renew their ARP tables. You may have a duplicate mac address (happened with me before!) and if that one is in the arp table of some router that also have another mac address in its table with the same IP (because you replace the mac but now this unit has a new mac but still with the old IP!). Now you have a IP conflict in your network.
I don't know it this is the case in your networks.

The reason the whole network goes down when only one unit gives a problem is because the network is bridged and thus all routers work in the same network/subnet. If you have somewhere a IP conflict this conflict is everywhere in the same network.

This is another advantage of making your network a routed one. Then your network is split up in section and you have better control and problems don't influence the whole network. And as a bonus, in case of heavy traffic or many units with physical branches (like a tree, like in the picture at the start of this topic) routing is faster.

By having a network fully bridged all packages are send to all devices, nevertheless if it has to be there or not. Routing, as the word says, makes sure packages are only traveling to destination where they are supposed to go to.

Dear guys,
sorry for delay....I try to change MAC-ADDRESS only after that I have problem and not first, so duplicate IP address is not generate from change of MAC.

Our network is already in route mode, and I have this problem in 3 different bridged network: one netowrk has 20 host, the other one has 100 hosts and the other one 150 hosts.

I think that problem is station-pseudo-bridge mode: is it possible?

P.s.-> If you want I can post a network packet sniffing when there was this network problem

Best regards

Any help?
I try disabling Default forward on AP-BRIDGE and on Access-list of AP, but problem is the same.

Need help please

Thanks in advance