Cacti / SNMP & Mikrotik Statistics

mojiro · Wed Aug 17, 2005 10:50 pm

cacti version:cacti-0.8.6f
It has been testedonlyon Linux Slackware 9.1 with Mikrotik 2.8.22 & 2.8.26

I have created some templates for Mikrotik RouterOS.
They capture both System and Wireless Status.

There is support for:
Wireless- Data Rates
Wireless- Frequency 802.11a
Wireless- Frequency 802.11b/g
Wireless- Signal Strength - Client Mode
System- CPU Utilization
System- Uptime
System- Disk Space
System- Memory Usage

###################################
[because I cannot attach files here you must download
it fromcacti forums]

Instalation:
1) decompress somewhere the zipped file
2) copywmikrotik.xmlat/web_dir/cacti_dir/resource/snmp_queries/
3) the files in folder ./templates (of the zipped file) should be imported one by one from theCacti Console

###################################
more information, fotos & updates you can find at
cacti forums

dwright · Wed Aug 17, 2005 11:15 pm

Thanks for the post mojiro. I will take a look and give my feedback.

D~

wildbill442 · Fri Aug 19, 2005 6:48 am

awesome, I'm looking at implementing cacti over our current basic MRTG server. I'm sure I'll be refering to this post! thanks.

eugenevdm · Wed Aug 31, 2005 10:21 pm

mojiro,

I'm having problem getting your example to work. If you are actively watching this board and if you have a free moment please could you visit Cacti's board to see a description of my problem!

Johan · Thu Sep 01, 2005 7:15 pm

Are you planning to build a script were you could see the signal of the client on the mt ap

best regards,

Johan

mojiro · Thu Sep 01, 2005 11:27 pm

Are you planning to build a script were you could see the signal of the client on the mt ap

best regards,

Johan

I working now on getting more information about mikrotik, that has
to do with routing, also this wireless adition is ready for the next update

cabana · Thu Mar 09, 2006 7:48 pm

Great stuff, works like a charm on Fedora Core 4 with Cacti version 0.6.8h

wintech2003 · Fri Jun 09, 2006 7:06 pm

mojiro, on my cacti (v0.8.6h) everything runs fine except the "Data Rates" graph

As you can see on the image below, although the Data Rate is being calculated (36Mbps) for Rx and Tx, I don't have a graph:

All other graphs (Wireless - Frequency 802.11a & Signal Strength as well as interface traffic and CPU load) work great!

Thanks for this great template!

rpingar · Sat Jun 10, 2006 6:43 pm

may you share the script to get the ap's client number?

Many thanks

alexwaller · Thu Dec 21, 2006 9:18 pm

Hi!
Seems that here are some SNMP-Gurus.
My Question is simple!

When I do:

interface wireless> print oid

I get:

Flags: X - disabled, R - running 0 R tx-rate=.1.3.6.1.4.1.14988.1.1.1.1.1.2.2 rx-rate=.1.3.6.1.4.1.14988.1.1.1.1.1.3.2 strength=.1.3.6.1.4.1.14988.1.1.1.1.1.4.2 ssid=.1.3.6.1.4.1.14988.1.1.1.1.1.5.2 bssid=.1.3.6.1.4.1.14988.1.1.1.1.1.6.2 frequency=.1.3.6.1.4.1.14988.1.1.1.1.1.7.2 1 R tx-rate=.1.3.6.1.4.1.14988.1.1.1.1.1.2.3 rx-rate=.1.3.6.1.4.1.14988.1.1.1.1.1.3.3 strength=.1.3.6.1.4.1.14988.1.1.1.1.1.4.3 ssid=.1.3.6.1.4.1.14988.1.1.1.1.1.5.3 bssid=.1.3.6.1.4.1.14988.1.1.1.1.1.6.3 frequency=.1.3.6.1.4.1.14988.1.1.1.1.1.7.3

And then I do:

snmpwalk -v1 -m MIKROTIK-EXPERIMENTAL-MIB -c public 10.34.250.253 .1.3.6.1.4.1.14988.1.1.1.1.1.2.2

Can anyone tell me why I dont get any values.

Alex.

sten · Fri Dec 22, 2006 7:45 pm

have you actually enabled snmp?

try

snmpwalk -v1 10.34.250.253 .

and

snmpwalk -v1 10.34.250.253 .1.3.6.1.4.1.14988

alexwaller · Fri Dec 22, 2006 11:14 pm

Hi!
That works.
I am able to read values from the interfaces.
I get system-name and version.
Thats all ok.

I yesterday updated to the newest version. That didn´t make any change.

Shall I post

snmpwalk -v1 10.34.250.253 .1.3.6.1.4.1.14988

?

alexwaller · Fri Dec 22, 2006 11:17 pm

I think I shall.

snmpwalk -v1 -c public 10.34.250.253 .1.3.6.1.4.1.14988 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.3.0.11.107.52.10.34.2 = INTEGER: -52 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.3.0.11.107.52.10.74.3 = INTEGER: -71 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.3.0.12.66.5.61.120.2 = INTEGER: -78 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.4.0.11.107.52.10.34.2 = Counter32: 237456649 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.4.0.11.107.52.10.74.3 = Counter32: 2204244 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.4.0.12.66.5.61.120.2 = Counter32: 81394589 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.5.0.11.107.52.10.34.2 = Counter32: 2974663199 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.5.0.11.107.52.10.74.3 = Counter32: 874829 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.5.0.12.66.5.61.120.2 = Counter32: 34689181 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.6.0.11.107.52.10.34.2 = Counter32: 1594037 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.6.0.11.107.52.10.74.3 = Counter32: 19695 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.6.0.12.66.5.61.120.2 = Counter32: 137726 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.7.0.11.107.52.10.34.2 = Counter32: 2535545 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.7.0.11.107.52.10.74.3 = Counter32: 7260 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.7.0.12.66.5.61.120.2 = Counter32: 326795 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.8.0.11.107.52.10.34.2 = Gauge32: 24000000 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.8.0.11.107.52.10.74.3 = Gauge32: 1000000 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.8.0.12.66.5.61.120.2 = Gauge32: 11000000 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.9.0.11.107.52.10.34.2 = Gauge32: 24000000 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.9.0.11.107.52.10.74.3 = Gauge32: 1000000 SNMPv2-SMI::enterprises.14988.1.1.1.2.1.9.0.12.66.5.61.120.2 = Gauge32: 11000000 SNMPv2-SMI::enterprises.14988.1.1.4.1.0 = STRING: "GGC9-UTT" SNMPv2-SMI::enterprises.14988.1.1.4.2.0 = Hex-STRING: 99 99 03 03 00 01 07 00 SNMPv2-SMI::enterprises.14988.1.1.4.3.0 = INTEGER: 4 SNMPv2-SMI::enterprises.14988.1.1.4.4.0 = STRING: "2.9.38" SNMPv2-SMI::enterprises.14988.1.1.6.1.0 = Gauge32: 0 End of MIB

I´m realy missing SNMPv2-SMI::enterprises.14988.1.1.1.1.1.2.2

sten · Sat Dec 23, 2006 1:31 am

To get that mib interpreted you must include the mibs into the "dictionary" of net-snmp package. That usually involves copying a version of the MIB into a folder or adding a form of "include" line into a configuration file.

enterprises.14988 <-- mikrotik MIB root ID.

alexwaller · Sat Dec 23, 2006 1:45 am

As you can see here:

snmpwalk -v1 -m MIKROTIK-EXPERIMENTAL-MIB -c public 10.34.250.253 .1.3.6.1.4.1.14988.1.1.1.1.1.2.

I tried to do something like you tell me to do.
我得到了麻省理工学院形成了Mikrotik-W雷竞技网站ebsite和复制it to the Dir of net-snmp.
Its using it, I know taht, because the numbers are converted to names.
But as I understand, that does not expand the quantity of numbers or paths, it only converts then from name to number and vice versa, right?

Maybee I am completely wrong. Please tel me...

Cacti / SNMP & Mikrotik Statistics

Cacti / SNMP & Mikrotik Statistics

Who is online