Hi,
I could not find any tutorial aboutWireless Routingsetup, which had topology as follow:
Internet _____ RB411A (AP Bridge) ----- RB411A (Station) _____ PC client
I do not want to use wireless bridging because of security reason. So I prefer to use wireless routing. AndPC Client must be using Public IP.
Please help me how to configure this topology.
Thanks in advanced
Re: Public IP behind Wireless Station Mode. Is it possible ?
Use WDS station for the client and WDS dynamic on the Ap or you have to run NAT on the station interface which would make difficult to use a public IP behind it
Re: Public IP behind Wireless Station Mode. Is it possible ?
or ask to your ISP to create a route to ur border router
Re: Public IP behind Wireless Station Mode. Is it possible ?
Hi,
Is there any way to use Public IP in user's PC without bridging mode ?
Thanks
Is there any way to use Public IP in user's PC without bridging mode ?
Thanks
Re: Public IP behind Wireless Station Mode. Is it possible ?
sure if you have routed network, u must ask to your ISP to creat a route to your border router.
Example
Internet (isprouter)-------- Router ------ RBXX ))))) (((((( PC client
in the isrouter they must add a route, ip route add xxx.xxx.xxx.xxx/yy via ROUTER_IP
in your site, if u are goin to use a /30 per client assing the router local side interface one of the free IP and then to the client the other
Example
Internet (isprouter)-------- Router ------ RBXX ))))) (((((( PC client
in the isrouter they must add a route, ip route add xxx.xxx.xxx.xxx/yy via ROUTER_IP
in your site, if u are goin to use a /30 per client assing the router local side interface one of the free IP and then to the client the other
Re: Public IP behind Wireless Station Mode. Is it possible ?
I got /24 from my ISP. And my ISP already routed to my core router.sure if you have routed network, u must ask to your ISP to creat a route to your border router.
Example
Internet (isprouter)-------- Router ------ RBXX ))))) (((((( PC client
in the isrouter they must add a route, ip route add xxx.xxx.xxx.xxx/yy via ROUTER_IP
in your site, if u are goin to use a /30 per client assing the router local side interface one of the free IP and then to the client the other
But my topolgy is:
Internet (isprouter)-------- My Core Router ------ RBXX1 ))))) (((((( RBXX2 ------- PC client
My question is what setting should I make for RBXX1 ))))) (((((( RBXX2 ?
RBXX1美联社桥,对吧?
RBXX2 as Station, right ?
And how to configure routing beetwen ether1 & wlan1 in RBXX2 ?
Thanks
Re: Public IP behind Wireless Station Mode. Is it possible ?
Isn't the point of a public Ip to be reachable? If you are worried about security why not use a private IP. But if you want a public I would bridge your interfaces eth1-BR-wlan1-AP-BRIDGE ---- WDS-STATION-wlan1-BR-eth1 then just configure the Public IP on the device connected to the eth1 of the station