UPS monitoring via USB port on RB2XX?
Quite a lot of the UPS's now come with USB cables for monitoring. Any chance we could get a driver in the RouterOS to allow monitoring a UPS plugged into the USB port? Something we could script against so that we could have a MT at a remote site send us email when the UPS reports a power failure, or that the batteries need replacing?
-
-
stephenpatrick
Forum Veteran
- Posts: 702
- 加入:
- Location:UK
- Contact:
-
-
stephenpatrick
Forum Veteran
- Posts: 702
- 加入:
- Location:UK
- Contact:
Hmmm
I get the sense these MT guys are so busy improving the RouterOS for us, it'd be really great if someone could have a look at the protocol and say "hey, just send the box X, Y, Z and listen for blah blah" and they'd probably just add it straight on.
If it isn't a "common standard", then best to just support 1 or 2 main brands.
I think it is an issue, particularly on remote radio base sites or repeater sites.
问候
I get the sense these MT guys are so busy improving the RouterOS for us, it'd be really great if someone could have a look at the protocol and say "hey, just send the box X, Y, Z and listen for blah blah" and they'd probably just add it straight on.
If it isn't a "common standard", then best to just support 1 or 2 main brands.
I think it is an issue, particularly on remote radio base sites or repeater sites.
问候
I can't get a APC Back-UPS XS with USB to work with 2.9. I can see the UPS under the USB tab on System Resources, but I never get to select the USB port under the System UPS Add entry dialog. All I can select is serial0 or serial1. The motherboard is using Intel 82801 USB controllers.
Can anyone else get this to work?
Can anyone else get this to work?
)
Who is online
Users browsing this forum:去ogle [Bot]and 7 guests