Hello All.
Looks like DST do not activate automatically starting from v3.4
The way to make it active is push Apply button (???).
Anybody can confirm?
DST Time do not work starting from in 3.4
You do not have the required permissions to view the files attached to this post.
Re: DST Time do not work starting from in 3.4
Thank you for the report.
We aware of this problem.
We aware of this problem.
-
-
dansoftware
刚刚加入了
- Posts: 24
- 加入:
- Location:Bryanskaya oblast', Russia
- Contact:
Re: DST Time do not work starting from in 3.4
I have problem with DST on MikroTik RouterOS 3.6 + RouterBOARD 333 too. A router works as NTP server. It activated DST successfully.
Four more routers synchronize their clocks with the first router. Two of them activated DST, but two not.
Code:Select all
> /system clock print time: 13:18:06 date: apr/09/2008 time-zone-name: "Europe/Moscow" gmt-offset: +04:00 dst-active: yes > /system ntp client print enabled: yes mode: unicast primary-ntp: 195.2.64.5 secondary-ntp: 62.117.76.140 status: synchronized > /system ntp server print enabled: yes broadcast: no multicast: no manycast: no
Code:Select all
> /system clock print time: 12:18:58 date: apr/09/2008 time-zone-name: "Europe/Moscow" gmt-offset: +03:00 > /system ntp client print enabled: yes mode: unicast primary-ntp: 10.1.0.1 secondary-ntp: 0.0.0.0 poll-interval: 15m active-server: 10.1.0.1 last-update-from: 10.1.0.1 last-update-before: 13m37s660ms last-adjustment: -18ms926us
Code:Select all
> /system clock print time: 13:19:57 date: apr/09/2008 time-zone-name: "Europe/Moscow" gmt-offset: +04:00 dst-active: yes > /system ntp client print enabled: yes mode: unicast primary-ntp: 10.1.0.1 secondary-ntp: 0.0.0.0 poll-interval: 15m active-server: 10.1.0.1 last-update-from: 10.1.0.1 last-update-before: 8m3s620ms last-adjustment: -24ms259us
Code:Select all
> /system clock print time: 12:20:48 date: apr/09/2008 time-zone-name: "Europe/Moscow" gmt-offset: +03:00 > /system ntp client print enabled: yes mode: unicast primary-ntp: 10.1.0.1 secondary-ntp: 0.0.0.0 poll-interval: 15m active-server: 10.1.0.1 last-update-from: 10.1.0.1 last-update-before: 9m26s680ms last-adjustment: -23ms781us
Code:Select all
> /system clock print time: 13:21:46 date: apr/09/2008 time-zone-name: "Europe/Moscow" gmt-offset: +04:00 dst-active: yes > /system ntp client print enabled: yes mode: unicast primary-ntp: 10.1.0.1 secondary-ntp: 0.0.0.0 poll-interval: 15m active-server: 10.1.0.1 last-update-from: 10.1.0.1 last-update-before: 13m8s760ms last-adjustment: -3ms765usRe: DST Time do not work starting from in 3.4
Look at the post above.