嗨

i see this commands in another forum, and i don't what the useful from it

ip ipsec policy
add src-address=100.0.0.0/24:any dst-address=200.0.0.0/24:any protocol=all \
action=encrypt level=require ipsec-protocols=esp tunnel=yes \
sa-src-address=10.0.0.2 sa-dst-address=10.0.0.1 proposal=default \
manual-sa=none dont-fragment=clear disabled=no
/ ip ipsec peer
add address=10.0.0.1/32:500 secret="gvejimezyfopmekun" generate-policy=no \
exchange-mode=main send-initial-contact=yes proposal-check=obey \
hash-algorithm=md5 enc-algorithm=3des dh-group=modp1024 lifetime=1d \
lifebytes=0 disabled=no
/ ip route
add dst-address=200.0.0.0/24 preferred-source=0.0.0.0 gateway=10.0.0.1 \
distance=1 comment="" disabled=no



can anyone explain it????

thanks

Its an IPsec tunnel the config is on one end its not complete, just read more about IPsec you will know more about this.