Have a router with the following route table entry:However, the router is sending ALL traffic out only the 1-dsl interface.
(and there are currently 1678 connections, so at least a few of them should have picked the alternative path when they were established).

Here is a snapshot statistic, note outbound traffic is only using 1-dsl.


1-dsl2-dslThis worked fine in 2.9. After rebooting, the situation is the same, except its now routing ALL traffic via 2-dsl, and ignoring 1-dsl. Also, it if matters or not, the route table actually contains many entries (in addition to the default gateway) that all specify 1-dsl,2-dsl as their path.

The firewall/Filter component is currently not working properly.
Hotspot does not appear to be working optimally either.

我相信任何事that relies on the firewall, should be considered broken.

As far as routing... Works great!!!

Other posts idicate that they are currently working on rectifying the filter issues, and also indicate that their intension is to have it fixed n the next RC.