你好,
我有一个带路由规则的v7.8路由器
但是安装在路由器上的The Dude无法通过静态路由看到计算机(例如192.168.20.20)

TER路线:
/ip route add check-gateway=ping comment=TER disabled=no distance=80 dst-address=192.168.20.0/24 gateway=192.168.0.1 pref-src="" routing-table=TER scope=30 suppress-hw-offload=no target-scope=30
(通过递归路径)
/ip route add comment="Setup recursive to TER" disabled=no distance=70 dst-address=192.168.0.1/32 gateway=192.168.20.67 pref-src="" routing-table=main scope=10 suppress-hw-offload=no target-scope=10

我试图允许这个家伙访问192.168.20.20:
/ route rule add action=lookup comment="router to TER" disabled=no interface=vpn-to-ter-BIA-sstp table=TER
/ route rule add action=lookup comment="router to TER" disabled=no src-address=192.168.20.167/32 table=TER
/ route rule add action=lookup comment="router to TER" disabled=no interface=vpn-to-ter-BIA-sstp src-address=192.168.20.167/32 table=TER
/ route rule add action=lookup comment="router to TER" disabled=no src-address=192.168.88.1/32 table=TER
/ route rule add action=lookup comment="router to TER" disabled=no src-address=192.168.81.1/32 table=TER
/ route rule add action=lookup comment="router to TER" disabled=no interface=bridge table=TER
/ route rule add action=lookup comment="router to TER" disabled=no src-address=192.168.20.67/32 table=TER
/ route rule add action=lookup comment="router to TER" disabled=no src-address=192.168.1.15/32 table=TER
/ route rule add action=lookup comment="router to TER" disabled=no interface=ether1 table=TER
/ route rule add action=lookup comment="router to TER" disabled=no src-address=127.0.0.1/32 table=TER

我想不明白。我试图嗅数据包，但不能嗅什么路由器“认为”。
如果我为Computer设置规则，那么Computer可以使用TER表路由，但是The Dude不能ping它。
如果我将TER更改为主表，那么Dude可以ping(例如192.168.20.20)。

我该试试别的吗?