Can some advise why OSPF PTP from V6 to V7 will not populate OSPF neighbor ?
在ip邻居,可以列出所有设备销g all the devices ip's ?
[admin@CCR2116] > routing/ospf/export
# jan/10/1970 00:41:49 by RouterOS 7.1.2
# software id = DX6R-SFZM
# model = CCR2116-12G-4S+
/routing ospf instance
add name=ospf-instance-1 routing-table=main
/routing ospf area
add area-id=10.111.0.250 instance=ospf-instance-1 name=ospf-area-1
/routing ospf interface-template
add area=ospf-area-1 cost=10 interfaces=VLAN1908_HEX_MGT networks=10.122.100.252/30 priority=10 type=ptp
add area=ospf-area-1 cost=10 interfaces=VLAN1903_Dude_CHR networks=10.122.100.208/30 priority=10 type=ptp
[admin@CHR_x86_Dude] > routing ospf export
# jul/07/2022 13:06:52 by RouterOS 6.49.1
# software id =
/routing ospf interface
add interface=VLAN1903_MGT_CCR2116 network-type=point-to-point priority=10
/routing ospf network
add area=backbone network=10.122.100.208/30
[adminabc@Hex_Network_MGT] > routing ospf export
# jul/07/2022 13:18:17 by RouterOS 6.49.3
# software id = 3VFV-HGYE
# model = RouterBOARD 750G r3
/routing ospf interface
add interface=VLAN908_CCR2116 network-type=point-to-point priority=10
/routing ospf network
add area=backbone network=10.122.100.252/30