In this MikroTik newsletter:

-MUM Europe 2018in Berlin, Germany, April 5-6
- Train-The-Trainer after MUM Europe in Riga, April 9-11
- SXTsq 5, High Power low cost small size 5GHz CPE
- SXTsq 5 ac, small size 5GHz CPE/Backbone with 802.11ac and Gigabit LAN
- LHG 5 ac - 24.5dBi 5GHz CPE/Backbone with 802.11ac and Gigabit LAN
- LHG 2, 18dBi integrated antenna for 2.4GHz
- RBM33G - OEM board with two miniPCI-e slots for 3G/LTE
- IPsec encryption performance
- New bridge
- Upcoming MUM events 2018

Download the newsletter here:
http://mt.lv/news79

And what about LHG60G ? It was expected to be released in 4Q2017 ...

Regarding RBM33G, is it possible to use 2 wireless cards on the 2 miniPCIe slots if someone does not need any 3G/LTE?

It's not clear from the PDF and product page.

We will miss Italy

Regarding RBM33G, is it possible to use 2 wireless cards on the 2 miniPCIe slots if someone does not need any 3G/LTE?

It's not clear from the PDF and product page.

+1, I am interested in this configuration as well.

Regarding RBM33G, is it possible to use 2 wireless cards on the 2 miniPCIe slots if someone does not need any 3G/LTE?

It's not clear from the PDF and product page.

Actually you can. The document had some incorrect information, we will fix the wording. Sorry about that.

Thanks for the clarification Normis

我希望会有更多的澄清the rollout of 6.41 and the migration of existing configurations to the new bridge.
Will 6.41 suddenly become the new stable version and will there be some warning about migration of complex configurations?
Last time I tried an update I still had issues, especially when trying to convert to the new single-bridge multi-VLAN setup.
(from a setup where each VLAN was using a separate bridge)

Since the M33G has lots of storage options and quite some "horsepower", will there be a dude-server package for the board?

Since the M33G has lots of storage options and quite some "horsepower", will there be a dude-server package for the board?

PDF says this board features a double-core 880MHz MediaTek CPU, so it is very likely the same ARM that powers hEXr3, for which TheDude server is already available. Still it'll be good to get a confirmation from the Mikrotik officials.

What about ROS v7?

Will there be a LHG XL HP AC5, or maybe a QRT / DynaDish AC with the antenna gain between 27-29 dBi? We need something like the UbiquitiPowerbeam 5AC-500 or 5AC-620for high throughput links on longer distances.
The 5 GHz spectrum is getting crowded. Shielded models, like the UbiquitiPowerbeam AC ISO, would also be very welcome.

And what about LHG60G ? It was expected to be released in 4Q2017 ...

Normis any update?

Hello,

Just wanted to note that you could pick some other date for such great event like MUM Europe.
MUM in Berlin is very close to orthodox christian Easter (a lot of orthodox people from Europe probably cannot come).

This is too bad - I was looking forward to this event.

Kind regards,
Leon

you forgot the christmas gift?
CRS PoE switches
it was promised for Q4

you forgot the christmas gift?
CRS PoE switches
it was promised for Q4

I know man. I wonder what the hold up is. MT guys had one at the mum, so it seems ready

Hope the poe switches come out soon


Sent from my SM-A520W using Tapatalk

Also waiting for the PoE switches here, I'll have to buy from another brand if they aren't released in January ...

And what about LHG60G ? It was expected to be released in 4Q2017 ...

Normis any update?

To Normis: Any news about LHG60G. There are rumours, LHG60G has not passed the FCC test ! Is it true ? Did you make certification to ETSI EN 300 550 ? When you expect market release of LHG60G. Thank you for any info.

Will be in Berlin in April exhibiting and presenting with IP ArchiTechs...can't wait to see everyone. Haven't been back to MUM Europe since Slovenia

Hi, pardon me if it's a noob question but anyway.... With regards to the new SXTsq series. The datasheet has wireless specificaitons. Are these the output figures at wireless chip or the overall device, i.e. including antenna gain?

Hello
I also want to know why the full poe switchs was not officially released, it was announced to be available on q4,
They had removed from the newsletter
Hope was delayed for a good reason, maybe an upgrade hardware


Enviado de meu XT1580 usando Tapatalk

As the Milano MUM Q3-Q4 products wsAP, PoE CRS, LtAP etc. was delayed, maybe the Berlin MUM need to be delayed too?
or you what to relaunch these products?

Ye.

Totally get things being delayed. However if you make an obligation to deliver them and don't, to stay silent is a bit uncool

When is RBM33G to be released?

My supplier was told that it would arrive in early January, then February and now we are on March and still nothing.
This is all de javu of RB3011...

I guess I'll have to stop reading any Mikrotik newsletter since they announce stuff that either get super delayed or never get released at all...

We cannot arrange our projects around your products if you don't release them... Either advertise stuff you know you will release on time or don't advertise them at all! You are not making anyone any favors by teasing us with hardware that will never be on our hands

For my country:
Estimated Availability: Fourth week of June !!!!

I'm working with availability for 2019 only ... unfortunately.
All new products advertised take too long to be available for purchase on distributor or reseller.
I'm waiting for the wap lte kit.

Regarding RBM33G, is it possible to use 2 wireless cards on the 2 miniPCIe slots if someone does not need any 3G/LTE?

It's not clear from the PDF and product page.

Actually you can. The document had some incorrect information, we will fix the wording. Sorry about that.

Hello!
Can m.2 socket of rbm33g support an Wlan atheros based card?

All new products advertised take too long to be available for purchase on distributor or reseller.
I'm waiting for the wap lte kit.

That is a different thing, it was available and has been sold but the first production run has been sold out and
a second run would be done only months later. So it is not the case of "new product announced but never sold".

Two weeks to know what kind of revolutionary products will be announced in MUM in Berlin

Maybe new Wave2 AP with GPS sync or 60Ghz + 5 GHz AP!!!!

Don't be so optimistic.

spring time I am optimist maybe the wind is changed waiting for Normis reply

Jarda you are right no good news on the wireless only ARM hardware remake and LTE

I know. I saw the opening presentation too. To be honest, switches look good, indeed, some lte things, fine, but nothing versatile like hap ac2 with at least 10 ports. There is still no successor of 2011 uias 2hnd, because 3011 is without WiFi and in comparison to rbd52g it lost its future...