Community discussions

MikroTik App

Search found 51 matches

bymszru
Sat Mar 11, 2023 7:49 pm
Forum:Beginner Basics
Topic:Let's Encrypt certificate automatic renewal in ROS v7
Replies:2
Views:396

Re: Let's Encrypt certificate automatic renewal in ROS v7

The /certificate enable-ssl-certificate command removed previously generated certificate and imported a new one. To automate this I've created a script and set it to run every 90 days in the scheduler. Thank you! /ip service enable www; /ip firewall filter enable [find comment=letsencrypt]; /log inf...
bymszru
Sat Mar 11, 2023 4:48 pm
Forum:Beginner Basics
Topic:Let's Encrypt certificate automatic renewal in ROS v7
Replies:2
Views:396

Let's Encrypt certificate automatic renewal in ROS v7

大家好!我期待这个证书generated by the command below would be renewed automatically, but that hasn't happened. Mine has just expired and I do not see any signs of incoming connections to port 80. The www and www-ssl IP services are running and port 80 is open for Let's Encry...
bymszru
Sat Feb 11, 2023 10:25 pm
Forum:Announcements
Topic:v7.8rc is released!
Replies:125
Views:37531

Re: v7.8rc is released!

after upgrade to 7.8rc1 USB LTE can't get DHCP client. showing status stopped
Same here with Alcatel IK41 USB LTE modem on hAP ac2.
I have downgraded ROS to 7.7 to make it work again.
bymszru
Thu Jan 19, 2023 5:07 pm
Forum:RouterOS beta and rc versions
Topic:RouterOS v7.1 - Let's Encrypt "error"
Replies:8
Views:7093

Re: RouterOS v7.1 - Let's Encrypt "error"

I guess people have to register a cheap domain and create a CNAME pointing to XXXXXX.mynetname.net. Not a big or expensive problem. Yes, that way it works fine for me with a Dynamic DNS service from No-IP. They offer free service with monthly confirmation of your host name, but one can sign up for ...
bymszru
Mon Jan 09, 2023 5:05 pm
Forum:Beginner Basics
Topic:How to separate network?
Replies:9
Views:662

Re: How to separate network?

Assuming that you have a standard configuration the simplest way from my point of view is: 1. remove ether5 from the LAN bridge 2. create interface list GUEST and add ether5 there 3. add IP address and setup DHCP server for ether5 interface 4. add a firewall rule to block access for your neighbor to...
bymszru
Wed Oct 12, 2022 4:25 pm
Forum:Announcements
Topic:v7.6rc is released!
Replies:94
Views:23185

Re: v7.6rc is released!

Detect Internet feature does not work after the reboot and as far as I remember never worked well in 7.x. And the issue of the socks server being unresponsive is still there. It can be detected by setting up a tcp-conn netwatch as shown below. While using the socks server Failed Tests counter increa...
bymszru
Wed Jul 06, 2022 4:26 pm
Forum:Announcements
Topic:v7.4rc is released!
Replies:116
Views:24543

Re: v7.4rc1 is released!

你好,自从搬到7。x我观察不稳定啊peration of SOCKS 5 service. At some point in time it just stops working. And a connection to SOCKS port cannot be established: C:\Users\user>telnet 192.168.11.1 1080 Connecting To 192.168.11.1...Could not open connection to the host, on port 1080: C...
bymszru
Mon Apr 19, 2021 10:06 pm
Forum:Announcements
Topic:v6.48.2 [stable] is released!
Replies:141
Views:54657

Re: v6.48.2 [stable] is released!

Is there fixed problem with MNDP protocol ?
My Gigaset C610A IP successfully registered at 3 different SIP gateways after enabling MNDP in IP -> Neighbours.
bymszru
Fri Oct 30, 2020 2:06 am
Forum:Beginner Basics
Topic:Dns server
Replies:2
Views:662

Re: Dns server

DNS servers seem to be empty in DHCP Server settings for your network (IP -> DHCP Server -> Networks -> DNS servers). In this case clients get DNS servers that are used by the router itself (IP -> DNS). By setting allow-remote-requests to "yes" you enabled DNS server on your router. That i...
bymszru
Wed Oct 14, 2020 10:59 pm
Forum:Beginner Basics
Topic:Help Downgrading RouterOS / Firmware [SOLVED]
Replies:5
Views:1115

Re: Help Downgrading RouterOS / Firmware[SOLVED]

你可能change the upgrade channel to "long-term" in System -> Packages -> Check for Updates and hit "Download & Install"
bymszru
Wed Oct 14, 2020 10:46 pm
Forum:Beginner Basics
Topic:need help with VLAN guest wireless on router and ap
Replies:7
Views:917

Re: need help with VLAN guest wireless on router and ap

IP address on ether2 instead of bridge (which has it as member port) is common mistake, maybe it's there after upgrade from master port in old versions. In my experience IP is removed from the bridge and set to ether2 after changing the defaults in Local Network section of the QuickSet. This bug is...
bymszru
Tue Sep 29, 2020 9:53 am
Forum:Announcements
Topic:v6.47.4 [stable] is released!
Replies:68
Views:32609

Re: v6.47.4 [stable] is released!

I cant install current frmwre to hAP lite "smips". no space! =( You may try to install current "long-term" version first and then upgrade to this "stable". 6.46.7 - 7464 KB (current long-term) 6.47.3 - 7580 KB (previous stable) 6.47.4 - 7628 KB (current stable) 6.46.7 ...
bymszru
Wed Jul 22, 2020 9:11 pm
Forum:Announcements
Topic:v6.47.1 [stable] is released!
Replies:146
Views:88485

Re: v6.47.1 [stable] is released!

不是任何人与VoIP设备有问题working after upgrade? I have a Siemens gigaset A480IP DECT base station. It was working fine until upgrade from 6.46.6 to 6.47.1 No issues with Gigaset C610A IP after the upgrade. The phone has successfully registered at 3 different VoIP gateways.
bymszru
Tue May 19, 2020 10:05 pm
Forum:Beginner Basics
Topic:Does RouterOS block NTP traffic by default? [SOLVED]
Replies:23
Views:13319

Re: Does RouterOS block NTP traffic by default?[SOLVED]

Vilx, most likely that's your ISP who blocks the NTP traffic. I had similar issue with my ISP. They were blocking NTP for some reason and also dropping a PPPoE session every night. I contacted their support team and both issues have been fixed. Don't ask me why there were doing this, maybe for the p...
bymszru
Sun May 10, 2020 8:56 pm
Forum:Beginner Basics
Topic:Admin access via the internet
Replies:14
Views:3855

Re: Admin access via the internet

"VPN Access" checkbox the QuickSet window...
bymszru
Sat May 09, 2020 12:31 am
Forum:Announcements
Topic:Updated btest.exe available for download
Replies:19
Views:40090

Re: Updated btest.exe available for download

I guess most of you have already noticed that key does not move focus from one input field to another.
bymszru
Tue Apr 28, 2020 4:59 pm
Forum:Beginner Basics
Topic:Port Forwarding Issue with 443
Replies:3
Views:2104

Re: Port Forwarding Issue with 443

Hi,
Make sure you have in-interface-list set to WAN for you dst-nat rule.
bymszru
Sat Apr 25, 2020 11:43 pm
Forum:Beginner Basics
Topic:parental control
Replies:3
Views:4315

Re: parental control

1) There is no magic button in Mikrotik router settings that will block adult content on web sites. The easiest way to achieve that goal would be: a) enable DNS server on a router b) intercept all DNS requests from your home devices and redirect them to the router c) in the router settings instead o...
bymszru
Tue Apr 21, 2020 11:41 pm
Forum:Beginner Basics
Topic:Restore "crashes" RB951G-2HnD
Replies:10
Views:2981

Re: Restore "crashes" RB951G-2HnD

Even though official docs say the backup can be restored on the other device of the same model, I would only restore it on the same device that created that backup. To transfer a configuration to another device consider the /export file=myconfig and /import file=myconfig commands. Note that files st...
bymszru
Tue Apr 21, 2020 5:55 pm
Forum:General
Topic:What is my IP address on my MikroTik router?
Replies:3
Views:2986

Re: What is my IP address on my MikroTik router?

Your router may have several IP addresses. IP addresses are assigned to interfaces of the router. The default IP of the LAN interface (your home network) is 192.168.88.1/24. The IP for the WAN interface the router will receive from your Internet service provider.
IP.png
bymszru
Tue Apr 21, 2020 1:09 pm
Forum:Beginner Basics
Topic:Mikrotik mode button and wlan2 [SOLVED]
Replies:3
Views:6874

Re: Mikrotik mode button and wlan2[SOLVED]

It depends on your needs. If you type "?" in the terminal, you'll see the list of all available commands. The command I use most often is probably ping :) In the terminal you can do pretty much everything (or even more) that is available for you in Winbox, as terminal commands usually repl...
bymszru
Tue Apr 21, 2020 12:13 am
Forum:Beginner Basics
Topic:Mikrotik mode button and wlan2 [SOLVED]
Replies:3
Views:6874

Re: Mikrotik mode button and wlan2[SOLVED]

Yes, you can. The the following command may be used to enable/disable the interface: /interface wireless set wlan2 disabled=(![get wlan2 disabled]) Open System -> Routerboard -> Mode Button in Winbox and paste the command into On Event field. To perform the same in the terminal: /system routerboard ...
bymszru
Wed Apr 15, 2020 5:03 pm
Forum:Announcements
Topic:v6.46.5 [stable] is released!
Replies:72
Views:44736

Re: v6.46.5 [stable] is released!

Hi Everyone, I had an issue with upgrading CRS326-24G-2S+ from 6.45.7 to the current stable version (6.46.5). Right after the RouterOS upgrade I have also upgraded the firmware and reboot the CRS. After I issued the /export file=filename command, the terminal window in Winbox reported that console h...
bymszru
Thu Apr 09, 2020 12:56 pm
Forum:Announcements
Topic:v6.46.5 [stable] is released!
Replies:72
Views:44736

Re: v6.46.5 [stable] is released!

Where can I find this? I know there already is this option for CAPsMAN, I was hoping to find it in the regular Wireless interfaces too. *) wireless - added "skip-dfs-channels" parameter; You can set this parameter in the command line. I haven't found it in Winbox. [user@hAPac2] > /interfa...
bymszru
Sun Apr 05, 2020 1:40 pm
Forum:Beginner Basics
Topic:How to merge all VLAN in a unique interface ? [SOLVED]
Replies:3
Views:6375

Re: How to merge all VLAN in a unique interface ?[SOLVED]

Hello, This is how I would configure the switch for such scenario: /interface bridge port add bridge=BR1 interface=sfp01-DECIX pvid=10 add bridge=BR1 interface=sfp02-GTT pvid=12 add bridge=BR1 interface=sfp03-Telia pvid=13 add bridge=BR1 interface=sfp04-Telxius pvid=14 add bridge=BR1 interface=sfp05...
bymszru
Sat Apr 04, 2020 4:02 pm
Forum:Beginner Basics
Topic:Simple Way to make Router a VLAN Switch
Replies:3
Views:2124

Re: Simple Way to make Router a VLAN Switch

Hi, Assuming you have 2 vlans (100, 200), 4 trunk ports (ether1 - ether4) and 4 access ports (ether5 - ether8), the configuration steps could be the following: 1) Reset CRS112, no default configuration. 2) Create a bridge and add all ether interfaces to the bridge. Set pvid on access ports equal to ...
bymszru
Thu Mar 12, 2020 12:32 pm
Forum:Announcements
Topic:Winbox v3.22 released!
Replies:117
Views:78492

Re: Winbox v3.22 released!

Dear MT! Would you consider changing the first column in the Log window to the running number? Currently those numbers are from 0 to 999 and when the log is full (all 1000 lines populated) the specific log message will get a new number from the previous log entry with every new entry added. From my ...
bymszru
Wed Mar 11, 2020 10:37 pm
Forum:Announcements
Topic:Winbox v3.22 released!
Replies:117
Views:78492

Re: Winbox v3.22 released!

The issue with Winbox window position and shuffled windows inside the Winbox itself is caused by the scaling factor in the display settings.
If you set it to 100%, you won't see any issues. In my case it is set to 125%...

Windows 10 build 1909 Display Settings.png
bymszru
Thu Jan 30, 2020 6:39 pm
Forum:Announcements
Topic:v6.46.2 [stable] is released!
Replies:120
Views:57356

Re: v6.46.2 [stable] is released!

After the upgrade (both ROS and Firmware) from 6.46 to 6.46.2 write-sect-total has been reset on my hAP ac2. [altmsizo@hAPac2] > /system resource print uptime: 3d23h33m50s version: 6.46.2 (stable) build-time: Jan/14/2020 07:17:12 factory-software: 6.43.10 free-memory: 71.0MiB total-memory: 128.0MiB ...
bymszru
Fri Dec 06, 2019 10:35 am
Forum:Announcements
Topic:v6.46 [stable] is released!
Replies:113
Views:63638

Re: v6.46 [stable] is released!

Not so sure I want to upgrade, my RB450Gx4 is not a concern its my two CAPACs and the reports above of possible wifi issues???? running several HAP AC (RB962) on 6.46 ... dozens of IOS devices. I don't see any unexpected wifi reconnects ... It's good that wifi still works well after the upgrade on ...
bymszru
Wed Dec 04, 2019 11:19 pm
Forum:Announcements
Topic:v6.46 [stable] is released!
Replies:113
Views:63638

Re: v6.46 [stable] is released!

I Get "Limited Access" on Android App Since The Update to 6.46 Yes, indeed, limited access. My connection is hAPac2 (DHCP client on ether1) -> cable modem -> ISP Screenshot_20191204-225501__01.jpg I also noticed that DHCP client options are missing in /export command output in comparison ...
bymszru
Wed Dec 04, 2019 10:21 pm
Forum:Announcements
Topic:v6.46 [stable] is released!
Replies:113
Views:63638

Re: v6.46 [stable] is released!

*) wireless - improved 802.11ac stability for all ARM devices with wireless;
... During download test CCQ falls to less than 20%. During upload CCQ is larger than 90%...
I see similar behaviour on hAP ac2. In my case CCQ during upload goes beyond 100%.
bymszru
Tue Oct 29, 2019 11:10 am
Forum:Announcements
Topic:v6.45.7 [stable] is released!
Replies:104
Views:64833

Re: v6.45.7 [stable] is released!

Can`t upgrade to 6.45.7, not enough space to upgrade

how to upgrade?

You may try downgrade first to an earlier stable version (e.g.6.43.7) which takes less space on the device and then upgrade to 6.45.7
bymszru
Sun Sep 15, 2019 11:29 am
Forum:General
Topic:RouterOS v7.0beta1 (ARM)
Replies:203
Views:95566

Re: RouterOS v7.0beta1 (ARM)

Why are people asking for ext4 on mikrotik devices when they should be asking for f2fs?
As a home user, I wish v7 had support for exFAT. Microsoft has made technical specification for exFAT publicly available last month (proof link).
bymszru
Sat Sep 14, 2019 2:10 pm
Forum:Announcements
Topic:v6.45.6 [stable] is released!
Replies:58
Views:57108

Re: v6.45.6 [stable] is released!

Downgrade to 6.43.7 went fine. Now you can try to upgrade to 6.45.6. Since 6.43.7 takes less space compare to your previous version was larger, 6.45.6 may now fit. That worked well, thanks. So the upgrade path for this hAP lite was: 6.43.7 -> 6.45.5 - OK 6.45.5 -> 6.45.6 - Failed 6.45.5 -> 6.43.7 -...
bymszru
Fri Sep 13, 2019 10:12 pm
Forum:Announcements
Topic:v6.45.6 [stable] is released!
Replies:58
Views:57108

Re: v6.45.6 [stable] is released!

Dear MikroTik team, Please try to make 6.45.x bundles smaller for smips devices (hAP lite, hAP mini) without sacrificing the functionality. Upgrade from 6.45.5 to 6.45.6 failed on one of my hAP lite due to insufficient free space (20 KiB free out of 16 MiB). And yes, I had no other files, just the ....
bymszru
Thu Jul 25, 2019 11:03 am
Forum:Announcements
Topic:v6.45.2 [stable] is released!
Replies:205
Views:80076

Re: v6.45.2 [stable] is released!

not enough storage to update. You should hold off and wait for 6.46. MT is aware of the problem and seems to work on solution for the small space devices. From 6.46Beta16 *) smips - reduced RouterOS main package size (disabled LTE modem, dot1x and SwOS support); Does it mean that my LTE modem will ...
bymszru
Fri Jul 19, 2019 9:56 pm
Forum:Announcements
Topic:v6.44.5 [long-term] is released!
Replies:100
Views:77865

Re: v6.44.5 [long-term] is released!

The Dude onhEX(6.44.3) shows weirdExpires Aftertime inDHCP LeasesforhAP acat the latest long-term build (6.44.5). The lease time for DHCP server athAP acis set to 1 day.

DHCP_Leases_Expires_Afterx.png
bymszru
Thu Jul 11, 2019 5:12 pm
Forum:Announcements
Topic:v6.45.1 [stable] is released!
Replies:415
Views:179923

Re: v6.45.1 [stable] is released!

As per my observation 6.45.1 is more resource hungry than the long-term 6.44.5 on hAP ac2. The router has a default configuration and not connected to WAN link. I would say that 5-10% of CPU utilization for a device in idle state is quite high. When running at 6.44.5, the CPU utilization is 1-4%. An...
bymszru
Wed Feb 06, 2019 1:30 am
Forum:Announcements
Topic:v6.43.11 [stable] is released!
Replies:79
Views:35823

Re: v6.43.11 [stable] is released!

After upgrading hEX and hAP ac from 6.43.8 to 6.43.11 (ROS and FW) samba got broken. I got the following message in Windows 10: \\router.lan\backup is not accessible. You might not have permission to use this network resource... The parameter is incorrect. I restored access to samba shares by downgr...
bymszru
Thu Aug 23, 2018 6:25 pm
Forum:Announcements
Topic:v6.42.7 [current] is released!
Replies:159
Views:64078

Re: v6.42.7 [current] is released!

This version fixed the weird problem with Xiaomi Redmi 3S phones that could not get IPs from DHCP server running on hEX.

Thank you, MikroTik team!
bymszru
Fri Jul 13, 2018 2:04 pm
Forum:Announcements
Topic:v6.42.6 [current]
Replies:102
Views:59117

Re: v6.42.6 [current]

ROS v6.42.6. WinBox v3.16. After upgrade: hAP lite: hAP AC^2: Where is the information on the write sectors? Previously, it was shown in WinBox, now only in the console: In my case sector write counters reappeared in Resources window after I reopened it in Winbox. Device: hEX Winbox: 3.16 ROS &...
bymszru
Tue Apr 17, 2018 9:36 pm
Forum:Announcements
Topic:v6.42 [current]
Replies:147
Views:70691

Re: v6.42 [current]

RB850Gx2. After upgrade ROS to 6.42 does not show Tx rate when used Torch. https://i.imgur.com/KpSYfR8.png I face the same issue on hAP ac (RB962). In my case Tx Rate is always zero for ethernet interfaces added to the bridge with hardware offloading enabled. Disabling hardware offloading for the b...
bymszru
Mon Feb 12, 2018 4:41 pm
Forum:Announcements
Topic:v6.41.2 [current]
Replies:124
Views:47557

Re: v6.41.2 [current]

I found a couple of strange entries in the routing table after the upgrade on my hAP ac. What exactly is considered strange there? The new routes to 0.0.0.0/ 32 in the list which were not there before. According to the RFC 3330 it is kind of special address, and I cannot understand if it was added ...
bymszru
Mon Feb 12, 2018 3:25 pm
Forum:Announcements
Topic:v6.41.2 [current]
Replies:124
Views:47557

Re: v6.41.2 [current]

I found a couple of strange entries in the routing table after the upgrade on my hAP ac. The upgrade path was the following: 6.40.5 > 6.41 > 6.41.1 > 6.41.2. Not sure when it happened exactly.

Image
bymszru
Tue Jan 09, 2018 10:05 pm
Forum:Announcements
Topic:v6.41 [current]
Replies:304
Views:127060

Re: v6.41 [current]

The RB751U interestingly shows a blank where you would expect to see the new F/W (6.41). Is this a limtitation of the older hardware or a bug I wonder ?

It wasreported earlierin this topic and already fixed in6.42rc.
bymszru
Thu Jan 04, 2018 10:03 pm
Forum:Announcements
Topic:v6.42rc [release candidate] is released!
Replies:537
Views:170327

Re: v6.42rc [release candidate] is released!

!) wireless - new driver with initial support for 160 and 80+80 MHz channel width; where to find this feature ? what hardware is supported to test 160mhz channel width? This new driver is needed to take advantage of 802.11ac Wave 2 wireless devices which MikroTik does not have currently (if I am no...
bymszru
Tue Dec 26, 2017 9:23 pm
Forum:Announcements
Topic:v6.41 [current]
Replies:304
Views:127060

Re: v6.41 [current]

The naming style of the new interface lists for MAC Server is kind of weird. I would rather rename "mactel" to "mac-telnet".
bymszru
Tue Dec 26, 2017 6:46 pm
Forum:Announcements
Topic:v6.41 [current]
Replies:304
Views:127060

Re: v6.41 [current]

Hi there, Upgraded hAP ac at home from 6.40.5 to 6.41 with one minor issue - all interfaces in the "discover" list became enabled, however some of them were disabled before. To avoid potential problems with conversion of Master Port configuration, I have added all slave ports to the bridge...
bymszru
Wed Nov 08, 2017 10:25 am
Forum:Announcements
Topic:v6.40.5 [current]
Replies:82
Views:38371

Re: v6.40.5 [current]

Hi,

I've upgraded RouterOS successfully onhAP lite,hEXandhAP ac从6.40.4 6.40.5。
All devices had RouterBOARD firmware 3.41 before the upgrade.

到目前为止一切顺利……
bymszru
Wed Sep 20, 2017 10:44 am
Forum:Announcements
Topic:v6.41rc [release candidate] is released! New bridge implementation!
Replies:561
Views:188249

Re: v6.41rc [release candidate] is released! New bridge implementation!

...bridge1 doesn't need to be in a vlan for that vlan to forward frames to the member ports?. It didn't work for me until I added the bridge1 itself to the tagged ports list. I have temporarily setup hAP lite (RB941-2nD) as a VLAN aware switch which forwards both untagged and tagged (vlan=100) fram...