MikroTik - Search

CuninganReset

Hello Mikrotik.

Teltonika is having NTRIP corrections in the late firmware to enable their GPS devices to have a better positioning.

Maybe is the time to lead again the fleets market, but as you like.

CuninganReset

你好。

I have done some tests, it is not related with TCP MSS, it is related with NordVPN.

I have disabled VPN and using my normal internet but only adjusted the Mikrotik to change MSS to all the packets and it works, it connects to my cloud router.

Do you have any idea what is happening here?

CuninganReset

Hello, I have one Mikrotik Cloud Core router running in Azure cloud. I have NordVPN IPsec and my computer connects to internet via this VPN provider, the VPN endpoint is a Mikrotik Hapac2 at my house, i am connected behind this mikrotik. All my connections are using this hapac2 and NordVPN as VPN su...

CuninganReset

你好。I am using Mikrotik devices for connecting assets and also to obtain GPS positions on a reduced are yard 2km x 2km, neither the precision is good it can be improved using differential corrections via NTRIP protocol, the GPS chip-set in use support RTCM messages, the only think required is to ...

CuninganReset

Hello all, I have connected two Hapac2 using wlan2 and eth1. On first Hap, i have a brisge with priority 0x0000 and is promoted to root bridge. On the second Hap, I want to have the Ethernet 1 as root port and the forwarding one, if it fails i want the wlan2 to change to forwarding. I am not managin...

CuninganReset

你好。I am interested in the "Auto Upgrade" mechanisms using a central repository. Obvious methods is downloading packages from a sftp server but i am wondering why "RouterOS" have their own "Auto Upgrade" option. I am trying with different "howtos" but nothi...

CuninganReset

I answer my back, i have tried with the Mangle rule and also disabling the fasttrack on the router and now it appears to be lightspeed.

Right now it is working for me or at lest the first impressions.

CuninganReset

I have the same problem with NordVPN, very slow connection when browsing, ping or dns resolution works great but browsing is like a big shit.

I have done the MSS change in the mangle attending to the recommendation from Mikrotik but it is still not working for me.

CuninganReset

你好。

I have done a spectral scan with a GrooveA and i can not read the file format.

Do you know if any tool exits to read these files?

CuninganReset

Unless something has changed recently, only IPsec can make use of hardware encryption on Mikrotik. Opsss I expect the CloudCore 1009 to use the hardware crypto because the cypher is AES256 as in IPsec... If I am wrong I need to redesign my solution because of this. In the hardware crypto page, they...

CuninganReset

Hello guys. I have connected two CloudCore 1009 over a 1Gbps link using SSTP. A bandwidth test between the CloudCores is around 840Mbps in TCP and 1 Gbps in UDP. But when doing the bandwidth test over the SSTP tunnel I am getting 40 Mbps or little more and I do not know the reason. Both CloudCores s...

CuninganReset

谢谢!你好。我认为V6.44路由器操作系统。X介绍duced an issue with the GPS package. Since I upgraded to 6.44.X (2 or 3) the latitude and longitude values of the GPS are 32 characters long rather than the normal length. Already fixed in latest beta version, will be available in stable soon.

CuninganReset

你好。我认为V6.44路由器操作系统。X介绍duced an issue with the GPS package. Since I upgraded to 6.44.X (2 or 3) the latitude and longitude values of the GPS are 32 characters long rather than the normal length. I am using the GPS to send information to a webpage using the GPS example but now it i...

CuninganReset

你好。

I am trying to issue configuration commands to the GPS chip into the LtAP Mini.

As far as I have tested, the only way is using the "Init String" in the "GPS" menu but I maybe there is another way of issuing commands to the chip when working.

Does anyone know??

CuninganReset

And also, it depends on the GPS you are using, for example, if it is a Ublox it will be using Ublox native language rather than standard NMEA0183 messages.

CuninganReset

its auto as advertised,

tell me and I will change and put results here

你好。

You are not using a LtAP Mini, this is another GPS, in this case, I would select 9600 Bauds, 8,N,1 and in GPS antenna "external" rather than "internal".

CuninganReset

Hi All, so disappointed with Mikrotik, after those years and ... why even this problem is still actual, I also wasted my time to figure our something, and why Mikrotik Support thinks we are stupid, looks like a real good case for good lawyer to teach something how to do busyness, but MK is not a MS...

CuninganReset

Thanks for that, but I still get the same: https://prnt.sc/m96514 lat and long are none I tested ext GPS adapter and it gives me 2,9 v, so it's not burned I'm using the original MikroTik antenna which is outside. I think I will give up on this If someone can help please contact me at mihajloomozaik...

CuninganReset

你好。

I have an RBM33G board and I want to connect a dual-band Wifi mini PCIe board.

Mikrotik does not have any board with dual-band Wifi.

Any of you knows any board that fits into this board??

CuninganReset

With client settings, you can manage station roaming using client rules in the settings, by default they still use best power AP to change but you can change and add a rule to change only if lower than RSSI or something like. But Mikrotik did not answer in anyway to my question, only managing by mys...

CuninganReset

你好。I am massively using LtAP mini for vehicle tracking, on open spaces with the external antenna it is very handy and good but at the moment it finds some obstacles the GPS chip sometimes fail the position a lot of meters and jumps, next few seconds it returns to the same position. I am actually...

CuninganReset

你好。

Yes, you are correct, but I cannot imagine why I could not find that before...

Thanks for all.

CuninganReset

@normis lol, good job!)

Now it's clear, it's fail and better change the datasheet... LoL

CuninganReset

你好。

I can see on the LTE interface, in the status tab a "link-down' count but I cannot find it via scripting.

Picture 2018-11-08 14_44_36.png

Can anyone help me to obtain the data?

CuninganReset

你好。

I am using a LtAP Mini as 4G modem but when connected it gives me to types of LTE connections:
3G HSDPA
Evolved 3G (LTE)

I don't understand really what it means and which is 4G, I can guess that 'Evolved 3G (LTE)' is 4G but maybe some of you can solve this question.

CuninganReset

Anyone knows if we will have wpa3 for our current devices, I don't care if it is using software but when?

CuninganReset

你好。

It is compliant with 802.3af/at version B only not A.

Just for the community to know.

CuninganReset

HEllo. I have sometimes a weird issue that is that when I plug the SIM into the SIM card holder it does not detect it. I need to /system routerboard sim set sim-slot=up and /system routerboard sim set sim-slot=down, and it detect it again. This happens sometimes when installing the SIM card or after...

CuninganReset

Hello all. I have a LtAP Mini with LTE KIt and I have an issue that I cannot manage to power it using a PoE 802.3at/af switch. In the LtAP Mini webpage it is stated that it support 802.3at/af. The switch is a Harting Ha-Vis eConn 2000 with PoE, type 802.3af/at "Alternative A" PoE Type &quo...

CuninganReset

Yes a lot of LoL but how many of this devices you must drill?? I need to drill more than 100 of these and i can not do it by myself, it will be done by other. I am sure i will have a good qunatity of "ba drilled" devices And it is very easy to solve: 1. Device must come with the holes alre...

CuninganReset

You mean that it is adjusted to 1 millimeter precision? You know that making one hole perfect is easy but making the hole on 150 devices is more difficult and lots of them will end with the hole moved to one or other side. In fact, I gave the device to my usual installation company to make the holes...

CuninganReset

Hi guys.

Please have a look to this post I wrote about LtAP Mini with LTE kit and external antennas.

viewtopic.php?f=3&t=139088

CuninganReset

One more photo with the device closed by force.

20180912_112846.jpg

CuninganReset

Hello guys. I think you have a design problem with the LTAP Mini with LTE kit. I have perfored the 3 holes in the cap to use external antennas for GPS and LTE and i have discovered that the device does not close with the connectors in place. 20180912_105110.jpg 20180912_105103.jpg I am using your LT...

CuninganReset

It can't happen as it stores the configuration of the slot.
The change happens after the reboot?
Can you easy reproduce it?

Yes.

I only need to power on and off the device several times.

CuninganReset

not, better not to rely on it for autonomous vehicles.

... every couple of seconds it "jumps" and come back.

So better don't rely on it for autonomous vehicle driving.

CuninganReset

你好。

I have a use case where I will connect users mainly using ovpn, the traffic will be few kilobytes every second but they are going to be 100 of them.

I an not sure of what router to buy to handle this kind of quantity.

Anyone have an idea??

CuninganReset

你好。I am using an LtAP mini with SIM card and not always but sometimes it changes the sim slot to "down" when it was configured as "up". I need to change it again at it works but it changes by itself, mostly when I reboot it or shut down and power on again. Any of you knows if...

CuninganReset

To me, it works with an external antenna. It is very precise but sometimes it jumps to the side by some meters and comes back. I don't know if it is produced by the LTE card because I am using LTE and GPS. Imagen1.jpg You can see it in the trace here, i am plotting every second but every couple of s...

CuninganReset

to me, it works with the external antenna and it works pretty good, with HDOP of less than 0.9

But with the internal antenna, it is impossible at all.

CuninganReset

你好。I have powered up it with the power adapter but the issue continues. It appears that when I connect to it using the WiFi it reboots suddenly, I have tested the device over Ethernet for 24 hours and no issue, but before that I was using the wifi, LTE and GPS all at same time and sometimes when...

CuninganReset

I have some idea of what is happening with the ltAP mini and the reboots. I was powering it up using USB and a 2.0A power adapter and I was connecting using Wifi (ltAP as AP) and when I connected it reboots. To me, it appears to be a USB power issue, with LTE, GPS and Wifi working at the same time i...

CuninganReset

Ok, the GPS must be installed from extra packages but it still does not fix any position with internal antenna. I am waiting for the external one and the pigtail. My biggest issue now is that device reboot every couple of minutes, it appears to have some issue and reboot by itself. Hello. I have see...

CuninganReset

Ok, now I have the option but I still do not have any position at all.

And a new issue arises, now every couple minutes the device reboot by itself.

There is nothing in the logs, only "improper shutdown"

CuninganReset

Thanks for your help.

I upgraded the device from 6.40 to 6.42 and all works.

Maybe mi will try including the gps.npk maybe all is my fault.

CuninganReset

你好。I have seen the same, the internal antenna is useless at all. Also, I have upgraded to 6.53rc51 and now my GPS disappear from the device. I tried to downgrade to 6.42.6 to test if it comes back but no, it is still lost. And as last resort, I tried with NetInstall but the same result, I have n...

CuninganReset

Hello all. I have bought some LTap minis to test for a fleet management. First, I can not reach more than 10Mbs using LTE. Second, internal GPS is not working and seems to be the same issue for all the units attending to the people talking in the forum, nobody manages to use the internal GPS. Third,...

CuninganReset

你好。

I have tried also to install routerOS with the NetInstall, the same issue.

I think Mikrotik must help here.

CuninganReset

你好。我升级LtAP迷你RC溃败erOS and it forces me to upgrade also the Winbox, now I don't have the GPS option in the LtAP mini. I have tried to downgrade to the actual stable release but GPS options is not available anymore. Also, I tried using PuTTy and SSH to the Mikrotik but...

CuninganReset

HEllo. I have two networks, joined by a pFsense and in one i have Mikrotik WiFi clientes and in the other other Ethernet MKT. I have allowed any traffic from 1 two network 2 but forbiden all from 2 to one. and in Winbox i can see all the MKTs, the Wireless and the Ethernet one. I have read the manua...

CuninganReset

你好。I have just starting with MKt and for now the issue i have is that once i have one router full configured i make a config backup with the command "export file=config" and later when i want to restore this config backup makign use of "system->Reset Config" and selecting the...

CuninganReset

Thanks for the class, I come from pFsense environment and in pFsense I only need to insert the rule to allow the connection and all the related packets will pass without notice to me.

For me the need to allow connections related packets is new.

Thanks you!

CuninganReset

But why I need to do that?
What happens with the new connections?.

Can you please explain a little more??

CuninganReset

With 6.40 release candidate i have the same issue.

CuninganReset

你好。I am just getting familiar with RouterOS and i have find a strange behaviour. Into NAT i have one rule to masquerade output traffic as usual and this work. NAT.png Into Firewall rules i have one rule to allow port 80 and 443 from network segment to reach whatever must be reach. Second rule is...

CuninganReset

你好。Thanks for the congratulations. I needed to design and install the network in 4 days, this is the better i can did with this time schedule, a long history to be told here. The dot lines are only for documentation purpose, in reallity the coverage of tower 7 reach all the yard but in order to ...

CuninganReset

This is my "yard"

Picture 2017-04-05 15_47_04.png

The APs are 90º side by side one of the other with 120º sector antennas.

The clients are Mikrotik Groove A on top of RTG cranes moving along the yard over the containers.

ECO-RTG_Tangiers_press-release_July_2007.jpg

CuninganReset

You do live in a castle!

Do you have a rough drawing of ap positions?

Sent from Tapatalk

Yes, my condos are incredibly bigs!

我现在在家里,明天我可以贴的the port (i mean marine port, with ships and containers and all this staff) but the problem it's real.

CuninganReset

你好,谢谢你的评论!院子里有2 km large and 500 meters width The APs are Rocket M5 and the clients are Mikrotik GrooveA 52hpn in 802.11n pure mode (station roaming only works in 802.11 mode). I know that roaming is something that must be done by the client, you can from AP side onl...

CuninganReset

你好。I have a network with 6 APs, every AP cover a certain zone of my yard, my clients roam without losing a ping from side to side of my yard and the connection is reliable most ot the time. But sometimes i have problems with one station or two (of a total of 90) and the problems are caused by th...

CuninganReset

你好。Thanks for your time, i have activated station-roaming and now the Tik search actively for best AP every couple of seconds. The only problem is when the station is the middle of two AP that are received with the same rssi, in this case the station try to associate to one and later to the othe...

CuninganReset

Opsss i bought to much, what is in the display shown? I hope i can show traffic use of the bridge.

The real traffic, for now, is a couple kbps but i will implement a OSPF and BGP network around it.

Thanks for all.

CuninganReset

Hello, i finally bought two CCR1009 with LCD and SFP+
I hope it can move 1 Gbps

CuninganReset

Thanks, i suppose that but i prefer to be sure.
To handle 1Gbps traffic what rb do you think i need???

CuninganReset

Hello, i have two completely different networks and i need to interchange some vlans from one two other.
My idea is to create vlans in both interface and bridge it, for example.

Vlan5.Ether1 <--> Ether5.Vlan7

Can this be done?

CuninganReset

你好。I have a couple of Grooves connected to various AP that are emitting same ssid and same key. My issue is that the Groove at startup connect to AP1 and after that moves it to AP2 area. What I found is that Groove keep stuck to AP1 and not roam to the AP2 until signal get really really bad and ...

CuninganReset

Hello All, Yes I did look at other examples of Mesh setup. I have mine pretty well complete except for I'm having problems with setting up the RB751U's with wired network. I want it to be like this below. Router ------- Mesh Portal (Wired/Wireless)------ Mesh (Wireless) ------ Mesh (Wireless) -----...

CuninganReset

I have resolved the issue by myself.
Thanks, you been very helpful.

CuninganReset

Hello, I have a lot of groove A 52 HPn and I need to configure all t the same, changing only the last octet of IP and router name. I have just configured the first, make a config backup with Winbox and also I did a "export file=config". Now I am trying to upload this config to another Groo...

Search found 69 matches