It's been for long time that tool for "send email" is semi broken I spend like 1h to trying to figure out why I cannot send email via mikrotik OS, been adding certs, tweaking ports, checking log message on mail server... and end up testing the email capability with CLI with success. `Email...

Using this code till 6.34, it copy src-file to dst-file (aka rename-like function) /tool fetch address=127.0.0.1 mode=ftp user=wifi password=wifi src-path=wifi.log.0.txt dst-path=wifi.txt user wifi have every policie enabled I can rename it via ftp when changing address, but from inside of mikrotik ...

Probably a Bug: In 'Logging' when there is a custom action: name="wifilog" target=disk disk-file-name="wifi34.log" disk-lines-per-file=1000 disk-file-count=1 disk-stop-on-full=no Rule: Topics: wireless, info Action:wifilog The file is not being created at all, but in 'Log' there ...

ZeroByte, by analog telephone, im talking about telephone that is connected to analog card in asterisk pbx. So I asume that rtp NEED to go via port 3 to port 5, to reach PBX, and PBX is converting it to analog signal to analog phone can hear the caller. I know that rtp can co directly like p2p, but ...

Hello, Im using rb951g-2hnd as home router (192.168.0.1) Port 1 and 2 is WAN connection Port 3 is master LAN port 192.168.0.0/24 Port 4 is LAN port for network 192.168.100.0/24 Port 5 is slave LAN (master is 3). To port 3 there is connected switch, behind him PC (my pc is 192.168.0.2) To port 5 ther...

We setup multi AP using RB750 with same SSID name, different channels. Alot of notebooks works great with them but one (important one) try to connect to the wrong AP. It's trying to connect to AP that have bad signal (more walls on road), instead of connecting to the nearest one. I wanted to 'ban' t...

I had the same issue and it was routing problem.
Returning connections were routed on wrong route and never reach originator.

You had right. Thanks for helping out!

If you think that the NAT is correct and the Forward chain has an entry permitting the traffic then double check that the target device is actually returning traffic to the RouterOS system - e.g. what is the target's default gateway set to? The returning gateway for target is set on internal ip of ...

Hello, Im trying to forward TCP port 5525, on server (remote site), so server forward traffic to his internal lan at 192.168.10.10, router on site is MikroTik v6.15 on RB. Im using wiki for port forwarding. /ip firewall nat add chain=dstnat dst-port=5525 action=dst-nat protocol=tcp to-address=192.16...