MikroTik - Search

Kliwer

Hi,
如何设置马克斯TX率无线电台it is possible on UBNT gear? I tried setting HT MCS on station but that set that MCS to TX and RX chains. How to set it to TX chain only?

Kliwer

The 100Mbit chip does get the price down a lot.

Thanks for that info.

Kliwer

Hi. I am wondering what's the point in using 100Mb ports in devices today? Is it really that much cheaper? There are so many nice devices from Mikrotik but seeing 100Mb port on them makes them useless, like new devices from 60ad series.

Kliwer

Here you go:https://www.thingiverse.com/thing:3062748

Kliwer

What is the OID for RSSI on w60g?

.1.3.6.1.4.1.14988.1.1.1.8.1.12.1

This worked for me.

Kliwer

Hi. I have two links using wAP60ad and the signal value is confusing to me. Link 1 AP side: [admin@AP_60ad] > /int w6 moni 0 connected: yes frequency: 58320 remote-address: 04:D6:AA:67:89:CA mcs: 8 phy-rate: 2.3Gbps signal: 80 rssi: -70 tx-sector: 61 rx-sector: 96 Link 1 STA side: [admin@STA] > /int...

Kliwer

Keep in mind that "Width" is in blue on Quick set so it was not applied yet. I see nothing wrong on the screenshot.

Kliwer

Hi. It would be nice if it was possible to disable dynamic entries in queues, bridge ports and address list. Sometimes I need to disable queue for a client connected by pppoe by radius to test his throughput - right now I have to delete queue and after testing I need to disconnect pppoe so it connec...

Kliwer

!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;

So where is new Windows Bandwidth Test app?

Kliwer

Less than 2m.

Kliwer

My tests from yesterday (80MHz, room test, iperf3 tcp, 6.42rc30) 1. nstreme - stable 180Mbps - it seems it's max for nstreme regardless of device 2. nv2 - unstable, max that I seen was about 300Mbps 3. any - unstable too, max that I seen was about 550Mbps It looks that MT is on a good road, but stil...

Kliwer

Hi. I have a network like in the attached file. Between each router there is ospf configured, no bridge at all. SERVER has only internal IP assigned on interface, its public IP is assigned bys src/dst-nat on MT1. I want to access SERVER by its Public IP from PPPoE Client. I know I need Hairpin Nat b...

Kliwer

RB SXT G-5HPnD r2
Menu->Wireless = crash

Thank you, this will be very useful app.

Kliwer

I tried using both commands in terminal - didn't work. Find returns nothing. Remove works, yeah, but right after it removes, entry that was removed is added again. When I remove entry 0 and then check with Print then this entry is at the end of the list with new index.

Kliwer

Hi, after upgrading to 6.27 my scripts broke. I am using: /ip firewall address-list find list=komunikat in my script and it is no longer working. On another router with 6.7 it works fine. Running this command in terminal is not working either. There is one more bug with address-list: when I try to r...

Kliwer

Hi. I have situation like this: ...........A C---D< ...........B C has the internet access. Right now, A wants to access http://www.google.com and C redirects it to B. Then A clicks "Go back" button on the page that will redirect it back to the internet. Doing so adds A's IP do an address ...

Kliwer

RouterOS 5.26 but I also checked with 6.7(on another MT) WAN is PPPoE client on ether1. On this MT there are PPPoE Server and MetaROUTER with web server. 192.168.120.250 is an address of MetaROUTER. PPPoE Server is running on BRIDGE which consists of wlan1 and vif1. I used torch on pppoe interface o...

Kliwer

That's what I want to achieve but it is not working.

Kliwer

Hello. I have a rule: 0 X chain=forward action=add-src-to-address-list protocol=tcp dst-address=192.168.120.250 src-address-list=test address-list=test2 address-list-timeout=1h dst-port=80 By my understanding it should work like this: When there is traffic to address 192.168.120.250 on port 80 add s...

Kliwer

That's not it. I don't want to use external login page. I have simle dst-nat rule in firewall to redirect user to some page, currently external. What I want to know is what I need to write in address and port in that dst-nat rule to be redirected to hotspot login page.

Kliwer

Thanks, but it's not what I am looking for. Well, to put it simply I want mini web server on MT. I need to display one simple page for a set of IPs. I guess I can't create a new html file. The main question is how can I redirect to hotspot login page using firewall rule. I think that the login page ...

Kliwer

Hey. How can I redirect user to hotspot login page using firewall rule? When using MT address it redirects me to webbox login page. When using the same address in browser it shows hotspot login page. Anyone knows?

Regards

Kliwer

Hey. I modified hotspot login page to show just a message to the client. My question is how can I redirect user to this page using firewall rule? When I use MT address with port 80 it redirects me to webbox login page but when I use the same address in browser it shows my hotspot login page. Btw. is...

Search found 23 matches

Max TX Rate

Re: 100Mb LAN - what's the point?

100Mb LAN - what's the point?

Re: SXT sq - Mikrotik forgot to add a decent bracket!

Re: v6.42.5 [current]

Wireless Wire Signal vs RSSI

Re: 0_о

[Feature Request] Disable dynamic entries

Re: v6.43rc [release candidate] is released!

Re: SXTsq G5acD max real throughput?

Re: SXTsq G5acD max real throughput?

Hairpin NAT, no bridge, few routers

Re: Tik App, MikroTik android utility ALPHA test

Re: RouterOS 6.27 Bug - address-list find not working

RouterOS 6.27 Bug - address-list find not working

How to force traffic from A to B via C

Re: Firewall->Filter Rules Dst-Address is being ignored

Re: Firewall->Filter Rules Dst-Address is being ignored

防火墙- >过滤规则Dst-Address被忽视d

Re: How to redirect to Hotspot login page

Re: How to redirect to Hotspot login page

How to redirect to hotspot login page

How to redirect to Hotspot login page