对不起,我与PwrLine报告问题。upgra后de to 6.48, my two devices (model PL7411-2nD) don't pair. After reboot, change settings, more and more.. nothing. Downgrade to long term, all change to ok. Untill 6.47.8 everything works fine. ps: ether1, pwr-line1, wlan (off) all on bridge-local wi...

The logic of this rule was wrong - change dst-address-list=LocalLAN to be src-address-list=LocalLAN

Woohoo - thank you very very much - it works and i learned some more about hairpin NAT!

Big Thanks!

---Close---

here´s my rule...but it is like you said with out-Interface... /ip Firewall nat add action=masquerade chain=srcnat comment="NAT Loopback" dst-address-list=LocalLAN out-interface=ether2-master-local add action=masquerade chain=srcnat comment="default configuration" out-interface=e...

Have a small problem with my NAT Port forwarding and hope someone can help me... Have a port forwarded to my internal Server, everything is working fine BUT the Problem is on the internal Server log every Client have the same IP (the local IP from my Firewall) and not the real external IP, is there ...

Something like this:

Thank You! Works perfect!

Hello, have some beginner questions about my own dual WAN project! I have a RB2011UAS-2HnD, on ether1 is my "fast" internet (45/45), on ether10 the "slow" DSL (4/0,5) Both wan gateway from my isp´s are registered as a route (the gateway from the "slow" internet with dis...

have 2x RB260GS (fw 1.10) Switch 1 is placed in the roof where my WAN Internet cabel come in from outside Switch 2 is placed downstairs in my home office my plan is to connect the incoming (untagged) wan on Switch 1 eg to Port 5, connect Port 4 to my local lan downstairs Switch 2 is also connected t...