The problem was not on my side, it was Disney+ that had blocked my Ip adress,
Why? Because my kid had forgot to turn off VPN when he tried to login on Disney+.
Disney+ doesn't work with VPN. If they se that you try to login by VPN your IP will be banned.

opps

Hello, i wonder if any else have problem with Disney+, for a couple of weeks ago it worked just fine, then i upgraded my router to 6.47.6 and i cant log in anymore on Disney plus login page, the page is all black. When im on VPN to my work it works just fine, i have tested 5 different computers and ...

when you block a mac address in firewall filter (forward and input chain) you block internet access and not dhcp lease. /ip firewall filter add chain=input src-mac-address=aa:bb:cc:dd:ee:ff action=drop add chain=forward src-mac-address=aa:bb:cc:dd:ee:ff action=drop both are working for me in my vmw...

Now it works, i deleted the wireless on and off schema and now it works.

Does no one have any suggestion how ti fix this, every sunday morning i have t log in and set the router to Home Ap again

I posted its complete method on blog as well. just in case if any 1 want complete commands

Im looking forward to se the complete method on the blog

The only script och Scema that i have is this, and it have nothing to do with CAP?

I got a odd thing going on in my Router, every Saturday night my router becomes something called CAP, how is this possible?
so every Sunday morning i have to log in and change it to Home AP again, and then it works as it should

Hi All I got 6.35.2 in my mikrotik rb2011uias-rm, And i think something i wrong, i got one esp8266 with ip 192.168.88.60 and it wakes up every 5 minutes and then go to deep sleep, but in my log i got another unit with ip 192.168.88.11 wakes up every 5 minutes, both mac and ip are wrong, I have set s...

This works just like a charm

Is there any way to make the schema only works on weekends, Saturday and Sunday?

Thought i would use this nice tutorial to keep my children off internet in the mornings

Edit

//Sonny

Dude can monitor only what it can ping. Can this Windows computer directly access these wireless devices? Dude doesn't care how the device is connected (wires or not). Thanks for the answer, i downloaded "angry ip scanner" and it found every device both wireless and wired, but the Dude di...

Does anybody know how i could se all my wirelsess devices in the Dude?
I can only se my wired devices.
I run 3.6 an have a rb2011uas-2hnd-in

3g dongle will work. Search the forum for more info.

I got 5.25 and have the same problem as _saik0.
Does anybody have any solution?

Can i make so only a specifik ip-adress can connect to my raz?

No problem. What was the final fix?

It was my modem as a assumed,

Topic solved
Many thanks for the help

Torch your WAN interface and see if you see the traffic coming in. As was stated earlier. If you are trying to connect to the to the server via the public IP and setting on the same LAN as the server you will need to setup a hairpin nat rule. Im not at home so im not in the same LAN :) Torch doesen...

Ahhh ether1-gateway
但没有运气,到目前为止,我测试了一切,当i check the staistic it happens nothing

It must be my modem that stops this, i have even put the mikrotik router in dmz in my modem, i cant bride the modem.

ill get this when i tried [admin@MikroTik] > /ip firewall nat [admin@MikroTik] /ip firewall nat> add action=dst-nat chain=dstnat dst-port=8083 i n-interface=ether1 protocol=tcp \ \... to-addresses=192.168.88.223 ambiguous value of interface, more than one possible value matches input [admin@MikroTik...

Your dst-nat rule does not look correct. Did you cut it off trying to paste it or is it just wrong? It should be. /ip firewall nat add action=dst-nat chain=dstnat dst-port=8083 protocol=tcp to-addresses=192.168.88.223 must have been me when i past it. is this all that i need? /ip firewall nat add a...

im trying to connect via public ip xx.xx.xx.xx:8083 How do i get out the config? :oops: Right, but are you trying to connect via public IP from inside your 10.0. network? Or from the internet? If you are doing it from within you will need hairpin rules also. /ip firewall export im trying to connect...

im trying to connect via public ip xx.xx.xx.xx:8083
How do i get out the config?

/ip firewall nat
add action=dst-nat chain=dstnat` dst-port=8083 \
in-interface=ether1-gateway protocol=tcp\
to-addresses=192.168.88.223 to-ports=8083

I have tried that and did it again, but no luck
i dont have to do anything in firewall filter rules?

Which port and protocol are you trying to use?

Port 8083
protocol tcp

Could someone please put me in the right direction. Im trying to open a port to my razberry, so i can access i from my mothers house. I have read the forum for a couple of days but i cant get it to work. Is there anybody that could make a step by step turtorial? Raz ip 192.168.88.223 external ip 90....

Thanks for the quick reply. I didnt get it go work. But thats okay.
I got my Dlink bridge work anyway.

Hello this is my first post here, i have read the forum for quite some time now, but i need help. I bought a RB2011UAS-2HnD for a time ago, and it running smood in my test network. My intetion was to replace my old D-link router before i gave up :( Now to my problem, my d-link dir 635 gave up last n...