MikroTik - Search

Benik3

Hello. I have RB941 (HaP Lite) where I use port mirroring a lot for wireshark debugging. But I have problem, that on the tagreted port I'm not able to make any connection. My config: # jan/02/1970 00:50:55 by RouterOS 6.44 # software id = BLZA-7TM9 # # model = RouterBOARD 941-2nD /interface bridge a...

Benik3

I don't know exactly the impact of PCQ-limit, but PCQ-total-limit can be set as I mentioned above - limit*numbers of connection to limit.
So with limit 50 and 50 users I would set total-limit to 2500.

Try and watch

Benik3

I can't even imagine that Cisco will have something like winbox and so nice terminal

Benik3

Can you ´post some link to the cups and xsane on router? Otherwise it's HOME and OFFICE router wit USB which is now almost useless... Why I should by new printer just for network sharing when I have already some good one at home? And I have home router with USB? On OpenWRT I use now VirtualHere. It'...

Benik3

I wasn't here for a long time, but about the Dude, it's being improved?
It's about 2 years back what I tried it...

Thanks

EDIT: Well I see now that server is only supported on Tile or x86 Mikrotik :/

Benik3

Yes. The scheme is like this. Exactly: router A LAN1<--------24GHz wireless-------->LAN1 router B router A LAN2<-------10GHz wireless-------->LAN2 router B The cost on OSPF is good idea! I will test it, thanks! :) EDIT: After setting OSPF interface cost and priority it works as it should. Thanks a l...

Benik3

As I said, I did it on both routers. Here are screenshots. In the first picture you can see, that the download stream is divided (it's not always 50:50) and routing table. This router is connected to our provider of connectivity (eth1) The second screenshot is from second router (deeper in our netwo...

Benik3

Thanks!

我刚试过。在一个direction it works OK (upload), in the second (download) it still split the connection on both antennas :/
I tried to set the GW on both routers...

Benik3

Do a search on "load balancing" and failover, you'll find lots of ways to achieve that on this forum. Thanks, I will look. I tried to search something related to "backup connection", but I wasn't very successful... It depends, are the router interfaces connecting to the antennas...

Benik3

Hello. I have two Mikrotiks connected together with two antennas through LAN (24GHz main and 5GHz as backup). Now I would like to make some system of the backup. The only idea which I got was to write script like this: Ping remote router through LAN1 port (with 24GHz antenna). LAN2 port (with 5GHz a...

Benik3

Use export or export compact and you will see.
If there will be any error, it will say you on which lane of configuration file. Or you can turn on verbose mode while importing to see it step by step

Then you can fix it manually...

Benik3

Try this:
The pcq-limit you can leave 50 and the pcq-total-limit is pcq-limit multiplied by number of connections (so e.g. for /24 it's 12700).
Works fine for me

Benik3

Samples...

No shielded cables and connectors into ubnt adapters? These looks like indoor cables...

Benik3

I'm for the USB/IP, because RAW TCP doesn't allow to read data from printer (so you don't see remaining ink, no paper message etc. on computer...)

Benik3

Problem was, that there wasn't possibility for soldering, otherwise I would do it better way

The holes were covered later

Benik3

When there is no POE passthrough

Benik3

Thanks, I will test it

EDIT: It looks that it works, thank you!

Benik3

Here it is
Note: Two wirelles are disabled and not used anymore, addresses 10.0.9.0/24 are disabled, 10.0.14.0/24 I just moved to unused ethernet for compatibility (we have it probably somewhere e.g. as DNS server IP, so I don't want to disable it...)

Benik3

Under IP/ARP I don't have any duplicated IP. Also reboot of RB would not resolve the problem with dropping ethernet... (all IPs of RB are static)

Benik3

Does ver 5 help with the 100 % cpu issue? I cant access the thing running 4.17 some times... I know its slow, but, I should be able to configure it.. :-) We have few RB133 and they works better with v5 then v4 :) Otherwise I have 6.18 on one RB600 and it installed wrong - WebFig is not presented (u...

Benik3

Hello. Yesterday I found a really strange thing with ping on Mikrotiks. Our customers complained, that connection drop. I went ping from our main RB to furthermost RB for few hours without any packet drop or latency issue. In the same time I went also PingPlotter, which showed me the issue - connect...

Benik3

Thanks for reply!
To be sure, I just booted old RB433 with netinstalled ROS v6.15.
And the simple queue works here

Maybe it's related only to some RBs?

EDIT: RB600 with 6.18 has also problem...

Benik3

EDIT: Solved, change target in simple queue to equivalent subnet (e.g. 10.0.0.0/16) Hello. I use in our network simple queue with PCQ to limit speed on each address. On ROS v5 and lower it worked like a charm, but now I discovered, that on two RB, which has ROS v6, it no longer works. Exactly it loo...

Benik3

Then install OpenWrt :) You'll have printer support. Then I don't need to buy Mikrotik with their RouterOS... Also I had DD-WRT on my Asus with USB. Print server worked, but there are two ways how to get this work: Standart TCP/IP connection (LRP or RAW protocol) as in DD-WRT. It work, but it's onl...

Benik3

+1
On RB951 "home router" it should be one of the main feature...

Benik3

OK, I get how Limit and Total-Limit works, but I have one question. Are the limits calculated for each queue (simple/tree) or for whole type? I mean, If I will create queue type PCQ_Up and PCQ_Down with Limit 2000 And then in queue simple or tree I will make queue for 10.0.1.0/24 and 10.0.2.0/24 (ea...

Benik3

It's e.g. some TP-Link router. If he connect it to WAN port, router get address from 10.0.0.0/8, but access on WAN is banned by default. So only way how to get to the router is connect it to LAN and reach settings on e.g. 192.168.1.1... Of course I'm not connected directly into our RB on which is th...

Benik3

Hello.

We have a network with subnet 10.0.0.0/8.
Is there any way, how to remotely set some router for customer, if the router has address from 192.168.0.0/24? (That means he will connect it to LAN, because on WAN the remote access is blocked by default).

Thanks

Benik3

What you mean with Second LAN?
Off course I can post for you my config

Benik3

Thanks!
我发现它还没有给我ateway. After adding to DHCP-networks it works OK

Benik3

Hello. I have a problem with RB800. I'm not able to get connection through it. My setting is like SOHO router: eth1 is WAN (from ISP). I have DHCP client on eth1 (ip is from 192.168.1.1/24 now) I setted eth1 as gate (0.0.0.0/0) in IP routes I have masquerade in NAT (srcnat, out interface eth1) DHCP ...

Benik3

Hello. I have here one mikrotik RB800 which unfortunately died. It looks on on-board power supply problem, probably connected with a humidity, because I can see white "maps" around e.g. filter capacitors legs... The RB doesn't boot (fan is rotating, but no beeping). I found, that Q9 and Q1...

Benik3

Can also someone confirm it?
因为second engineer still stand up for his opinion that it doesn't work and I don't have any free RB to test it :/

Benik3

谢谢!

Benik3

OK, hope you are right

Another question, if I got it right, when I don't use the switch IC, the bandwidth is limited by connection to CPU?
I mean:
eth1 has 100Mbs
eth2-eth5 has 100Mbps together
eth6-eth9 has 100Mbps together ?

Benik3

Thank you for the reply. Because someone said me, that he tried to set routing on two pots of RB816 which was on one switch chip, but it didn't worked... The same on RB433. So it's not true? We have one RB800+RB816 so it will be better solution then RB493? (There will be main input connection, local...

Benik3

Hello.
I would like to use RB493, but I must be sure, that all ports are fully managementable separately (like on RB800 or RB2011)

因为what I found, it use similar switch chip like daughter board RB816, or RB433 and what I heard, it's not possible on them.

Thank you

Benik3

I can confirm it with PPTP on windows 8.1 and RB800 with ROS 5.25

Adding SendExtraRecord (2) into HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\SecurityProviders\SCHANNEL
solved it, thank you!

Benik3

So this should work?

chain=forward action=add-src-to-address-list p2p=all-p2p connection-state=new protocol=udp address-list=UDP over limit address-list-timeout=0s connection-limit=100,32

Benik3

Maybe alsofrequency usage scan to file

Benik3

Thanks.
I can't update license without upgrade to v3.3?

Benik3

If I have RB with e.g. ROS 3.17, can I update it directly to 5.25?
Thanks

jp: You can use NTP only north-america.pool.ntp.org

Benik3

Never mind, it doesn't help me.
But is possible to configure more mikrotiks in one time threw dude?
Send some script or something similar to selected devices...

Thanks

Benik3

Hello. I'm new to dude, but I want a little help. I want to scan our network, but problem is, that snmp is turned off by default on mikrotiks and I really don't want to enable it manually on each device in network... So it doesn't read data, also it doesn't connect the devices together or more IP to...

Benik3

HI. We have a problem on our main RB800. We have RB800 to net. ON the output eth we have addresses 10.0.0.1/30 and 10.0.0.134/29. On the ethernet there is ubnt 10G with IP 10.0.0.132. On the other side there is ubnt 10G with IP 10.0.0.131 and connected to eth of another RB800. (both ubnt in bridged ...

Benik3

After 3 days of trial and error and lots of mad customers we have found a fix that seems to work for the NV2 lockup and rate problem. Adaptive Noise Immunity - Off Data Rates - Rate Selection - Legacy Data Rates - Default NV2 - Tdma period size - 2 Mike Francis JMF Solutions, Inc http://jmfsolution...

Search found 46 matches