Audience LTE + WifiWave2 package
Full reset with no default config.
Getting following message at startup:
error while running customized default configuration script: bad command name wireless (line 979 column 25)

Disabling wifiwave2 helps
Rolling back to 7.2.1 helps

Hi! I've got a RB951-2n running 6.48.3 with a PPPOE client to the ISP (gpon connected) I am noticing degradation of performance over time - initially connection is about 100 mbit, however over time it slows down to 10 mbit or less. Re-establishing the PPPOE connection fixes the problem. Not seeing a...

Hi! This has been discussed before, but a solution hasn't been found, so let's see if there are any ideas. Setup: CHR (4.45beta50) running in Azure (Hyper-v) CPU there does have AES-NI extensions (verified with coreinfo) IPSEC is setup to AES-CBC with SHA256. No hardware offload IPSEC is setup to AE...

That did the trick. Many thanks.

Hi! For traffic accounting purposes i need some hosts to be excluded from fasttrack. I do need other hosts to have fastrack functionality though. I got this rule: /ip firewall filter print chain=forward action=fasttrack-connection connection-state=established,related src-address-list=!Special log=no...

Bug #1 CHR running on 6.43rc5 on Hyper-V (Windows 10 v1803) does not recognize all network interfaces. If CHR is configured with 2 NICs (standard NICs, not legacy) is recognizing 1 interface only. It can be first or second NIC (varies), or both nic's. rebooting the router makes it recognize nics dif...

Sorry false alarm. Routing was setup wrong*Lame*

Issue also persists in 6.42 RC 49

*Update* - strange - downgrading setup to 6.41.2 keeps the problem. Quite sure didn't have the problem before.
Will HW reset and see if it's the config or something "leftover" as part of the downgrade

Hi! Upgraded to 6.42 rc 43 and since then see that fasttrack is not operational. Relevant setup There's a bridge with HW acceleration, and 2 ports added to the bridge. On firewall have 2 rules for in-interface=bridge out-interface=bridge action=fasttrack and action=accept Worked nicely before, now o...

Hi! After upgrading to 6.40 rc31 (and onwards), establishing openVPN connection breaks all routing. i.e. after mikrotik establishes connection to openVPN server (oVPN connection has a few routes), nothing gets routed (neither through openVPN connection, nor directly). Disabling openVPN connection fi...

RB2011 in a bootloop after v6.40rc13 upgraded from v6.40 rc9

Downgrading to 6.39rc60 fixes the problem, so something new in 6.39rc62 by the looks of it :S

Reproed this on another device also 6.39rc62. Setup is this: [VM]-[CHR]-[MT-6.39rc62]-[Internet] When fasttrack is on, the VM has issues accessing the net. Disabling fasttrack resolves issue. Worked with previous version. machines connected directly to MT in question (via lan or wireless) experience...

Have a setup with LAN full of wired clients, an ubiquity AP that has a vlan1 interface and vlan11 interface (for guest access) standard interface is bridged into LAN bridge /interface bridge add fast-forward=no name=Bridge-LAN add fast-forward=no name=GuestWLANBridge /interface ethernet set [ find d...

Yes, i have tried rebooting, powercycling, plugging the device hot or cold, all the same

they are indeed. 3.33 on both

Hi! Have a ZTE MF93D (Vodafone R212) Modem is sim-unlocked. I encounter issue with the modem - When i connect the modem to hAP ac lite -the device is detected fine as LTE port, and works just nicely When i connect the same modem to RB951G-2HnD, the device is detected as a USB device, but no LTE por...

Problem reported earlier persists.

An L2TP tunnel stops routing traffic when any version later than 6.35 is installed.
Seems like fastpath/fasttrack isn't working.

Starting packet sniffer on the interface and all is working again. Stop packet sniffer - all breaks.
Revert back to 6.35 - all works

Since v 6.35.1 there is a bug that causes mikrotik to fail routing based on routing marks. For example i have a mangle rule that sets routing mark on connections to certain IPs to go via different interface. This stopped worked since 6.35.1. Worst part is that if i start packet sniffer on the affect...

thanks for the suggestion, trying that now.
一个路线r perform normally when it hosts 2 access points are on different frequencies? Do i need to assign separate antennas for every AP?

Hi! I've setup a capsman between a RB2011UAS-2DnD and RBcAP2n both running 6.29, named LocalRouter and WirelessExtender [admin@MikroTik] > caps-man actual-interface-configuration print Flags: M - master, D - dynamic, B - bound, X - disabled, I - inactive, R - running 1 BR name="LocalRouter_Gues...

I was wondering if it's possible to get a full list of DHCP leases provided by Mikrotik via SNMP, or any other ways I was able to get a MAC-to-IP mapping via .1.3.6.1.2.1.9999.1.1.1.2.0 , however that information does not include hostnames. Any ideas if hostnames can be somehow retreived programmati...

I know what the answer for this is going to be, but it's just to show that the issue is not getting anywhere even if you pretend it does not exist and people still need it.

OpenVPN version update
OpenVPN support for UDP
OpenVPN support for LZO

在openWRT逃跑g in MetaRouter it's way too slow