MikroTik - Search

Edoras

I have trouble with OVPN server. When ovpn user connects to the server, in routing table appears: ADS 192.0.0.0/8 1 Why is there prefix /8 ??? I use ROS 6.48 . interface ovpn-server server print enabled: yes port: 1194 mode: ip netmask: 24 mac-address: FE:F2:63:8D:BE:4B ... default-pro...

Edoras

我有CCR1036。我使用VLAN连接。直到now I used VLAN bridging as making VLANs on each port and connect them in the bridge. (vlan100-1 on eth1, vlan100-2 on eth2 and add interfaces vlan100-1 and vlan100-2 to the bridge). I studied documentation and found that this way is wrong. Correct se...

Edoras

When I'm doing bandwith test between two routerboards, sometime happends, that it runs corectly in one direction, but on second direction it shows 0 Mbps. When I'm doing reverse BT (from the second router back to the 1st one), there is same problem but on the second direction. It is not depended on ...

Edoras

OK, thanks for explanation.

任何方式,如何解决这个问题?还是英寸oluble?

Edoras

Hello, I want to make NAT from local to public IP 1:1 . But I have two internet gateways and it can happends, packet can go thru IGW1 to internet and packet can return thru IGW2. I made same IP FIREWALL NAT rules on both IGWs: ip firewall nat add chain=srcnat action=netmap to-addresses=185.160.20.17...

Edoras

The way NAT works is that the router keeps a database of open sessions.

Yes, that's what I supposed ... but is there any way, how to switch off this behaviour? I just want NAT 1:1 ... change source or destination IP of packets exactly 1:1 and not check, if the session is opened or not.

Edoras

I have LAN and 2 internet gateways - Mikrotiks CCR. One of the computers in LAN I want to make NAT 1:1 to public IP . The public IP is routed to IGW2, so all trafic from internet to the computer public IP comes through IGW2. But trafic FROM the computer can be sent by both IGWs. Everything works fin...

Edoras

How to get ip broadcast address? :local brdcst [/ip address get [find interface="ether1"] broadcast] doesn't work ... is there any way, how to get it?

Edoras

I want to use IP of interface in my script. I get IP address by command :global addr [/ip address get [find interface="bridge1"] address] If on the interface is just one IP, it works. But when on the interface are two or more IPs, it displays error message " invalid internal item numb...

Edoras

Acually I solved that, but I don't like the solution so much ... My sollution: 1. Read all rules from ip/firewall/filter to PHP array. 2. Filter the array. 3. Remove from ip/firewall/filter .id's from the filtered array. It works, but there are 3 steps. Better would be 1 step - just "Remove fro...

Edoras

There are a lot of rules in "ip firewall filter". Some of them are commented. Comments starts "MYRULE_" (for example MYRULE_user1, MYRULE_user2, and so on ...) I need to delete all ip firewall flter rules, where comment started with string "MYRULE_" . I know h...

Edoras

Is planned to implement Ethernet Ring Protocol (G.8032) to RouterOS? It would be very helpfull.

Edoras

Yes, usually upgrade works normally. I did upgrade already on a lot of Routeros. But this is the 1st time, when I have trouble with the upgrade. Can helps me please anybody from Mirkotik? I want not throw away hardware, which is normally working, just because some licence was not succesfully updated...

Edoras

I have an old mikrotik router RB750. There was an old routeros version (3.30 or 3.something ) I want to make upgrade to last routeros version. I planned to go step by step, by main versions. The 1st step was "system routerboard upgrade". It was done ok. 2nd step: upload routeros 4.17 and r...

Edoras

When session is broken for any reason (lost connection, restart remote mikrotik, ...), winbox 3.0 session is closed automaticly. In older versions in Winbox 2.x when session was broken, it was just displayed warning "Session closed", but untill I click to "ok" button, window of t...

Edoras

I checked log from yesterday evening on the router, where wireless card hangs. There I can see nothing interesting about that. It hangs wlan4 around 22:35. I see, there no message about that. There you can see, I logged there on 22:43 (as user "koci"), disable and enable the wireless card ...

Edoras

We are using around 200 routers, based on mikrotik devices, usually RB433xx and R52Hn . Two years ago we started to use MIMO technologies (N standards) . Sometimes some of the MIMO links hangs. It is still connected (link in wireless table windows si marked by "R" as connected), usually in...

Edoras

In legislation, it is mandatory to use DFS radar detection. But in real, it is unusefull. In case of Radar detection, the AP immediatelly disable transmission and change the channel. But then it waits at least 1minute, untill it starts transmission. After 1 minute time limit, the wireless started ag...

Edoras

I'd like to use script, where will be some command separated on more physical lines. In mikrotik shell it works without any problem by using backslash "\" character on end of line. When I use this command in mikrotik shell, it works ok. ip dns set \ servers=10.89.1.2 But when I create scri...

Edoras

I'd like to use script, where will be some command separated on more physical lines. In mikrotik shell it works without any problem by using backslash "\" character on end of line. When I use this command in mikrotik shell, it works ok. ip dns set \ servers=10.89.1.2 But when I create scri...

Edoras

what about interference? make sure you use professional isolated pigtails, separate the antennas by proper distance, make sure you have an isolated outdoor box (metallic), see if you can't somehow isolate the cards between themselves (metallic sheet wrapped in plastic or something)? Actually we hav...

Edoras

We started to use MIMO technologies, based on Mikrotik and R52N cards, but I found strange thing: When there is just 1 card inside Mikrotik device (RB800+R52N), MIMO works correctly. Approximatelly 130Mbps (3km distance). But when I add more wireless cards inside this devices, MIMO has big troubles ...

Edoras

Hi Does exist any descripton of logging topics? Some of topics are clear, but some of them I don't understand, what they means (read, write, open, notification, calc, manager, ...) . I tried to find those information in documentation, but there I found just list of topics, without any description. T...

Edoras

v. 3.0rc10 On mikrotik is configured PPTP server. When PPTP is connected, there is interface "pptp-edoras". I made firewall rule based on this interface: "ip firewall filter add chain=forward in-interface= action=accept" . Everything works. BUT! When pptp is disconne...

Edoras

I have Internet gateway. On that computer I want to make masquerade and trafic shaping together. At the 1st version of firewall I mark packets in new chain: 1st 2 lines make jump to one of two chains In every chain I marked connection and then mark packet. Finally I made masquerade. (I have created ...

Edoras

want to know if you can help me i want to make a connection to main site but need to have one set TX sending the info and a norther set RX any one with simulator set up or info how to do this .

Do you mean nstreme dual?

Edoras

EXACTLY!!!

That's it!
Thanks janisk!

Edoras

I'd prefer SSH login, but telnet login will help me too.
I tried to make telnet account without password, just limited to source IP, but everytime it asked me for password (everytime I must to click Enter).
How to make script for login without any prompts? (from linux)

Edoras

I need to execute some script on RouterOS automaticly remotely from another computer (Linux). Problem is, I'm not able to connect there automaticly, without any username and password prompt. When I need to do that from linux to another linux machine, I'm using privat and public keys for ssh logging....

Edoras

I can't ping my wireless router or any address on the web. After I setup the bridge do I have to add a route to my gateway? Lee Hi I'm not sure if I understand corectly, but if you configured wlan+eth ports to bridge, then it is working as switch, not as router. So then you don't need to configure ...

Edoras

I solved that by folowing way: 1. I made backup of RouterOS (system backup save name="backup1") 2. I made new script called "restore", which contains one command: system backup load name="backup1" 3. I created scheduler (system/scheduler) for automatic start the "r...

Edoras

Is it possible to switch mikrotik in some "special safe mode", where changes must be commited untill some time? If changes will be not commited in time, all changes will be rolls back. I know how clasic safe mode works, but is is not usable for configurations, where session is lost during ...

Edoras

In 2.9 RouterOS WinBox is always using this fixed port number (unless 2.8, where you could specify a port number to connect to). Hmmm ... that's bad. Strange is, the communication starts ok ... as I monitored by tcpdump, first packets are really going to the correct port. But then it become crazy a...

Edoras

We have in LAN more mikrotik routers, but we have just 1 public ip addres. As gateway we have Linux. I'd like to reach all mikrotik router in LAN from internet, but I have just this 1 IP. (Forgot for VPN for now, please) On the gateway I configured NAT - port 1000 is translated to the 1st mikrotik L...

Search found 34 matches

OVPN wrong netmask

VLAN bridging performance

Bandwith test works just in one direction

Re: NAT 1:1 - how to ignore connection tracking

NAT 1:1 - how to ignore connection tracking

Re: Two gateways NAT problem

Two gateways NAT problem

Get IP BROADCAST

get IP ADDRESSES on interface

Re: PHP-API: Delete firewall filter rules, where comment started with "MYRULE" string

PHP-API: Delete firewall filter rules, where comment started with "MYRULE" string

Ethernet ring protocol

Re: Licence update problem

Licence update problem

close window session after session broken

Re: R52Hn - sometimes Wireless hangs

R52Hn - sometimes Wireless hangs

DFS radar detection without waiting

Multi lines command

One command on more lines with plink

Re: MIMO and more wireless cards problem

MIMO and more wireless cards problem

Logging topics description

Disconnected PPTP disabled IP FIREWALL rules

Mark packet for queue-tree shaping, combined with masquerade

Re: one set of antenas rx other set tx

Re: Auto login

Re: Auto login

Auto login

Re: setting up ethernet to wlan bridge

Re: Automatic undo configuration, if is not commited in time lim

Automatic undo configuration, if is not commited in time lim

Winbox and another port than 8291