Lakis we are having a similar problem, SNMP queries will stop going out from the DUDE server after a short while. We confirmed that there was no SNMP request leaving the dude server after about 5 minuets of operation, a reboot will get it working again for a short while. We are running the dude from...

Turns out there is a bug in 6.32.4 (bux fix tree) with QRT's

QRT Gbit interface will not negotiate at 10/100 half or full. Gbit POE to a Gbit Eth interface is needed to get activity back on the QRT Eth interface.

We have just bricked a large number of QRT 5 AC panels by upgrading them to the latest bugfix ROS release. One upgraded the Ethernet port becomes unresponsive. I have attempted to Netinstall / downgrade by forcing a net boot holding down the reset. Still do not get a link light to be able to downgra...

I am loving the application so far, a feature request of sorts it's something I dont think is yet available in the app. Being able to see wlan registration table, or a alignment mode of sorts. Being able to use the mobile application to align new CPE's to a AP, would be a very handy tool out on the ...

Error in v3 RC9 - incorrectly reporting vrrp state.

As mentioned by a few people, Tools => Profile crashes winbox

Crashes with all versions of ROS, v4, v5, v6 and winbox Beta

rb2011uias-2hnd, 3.18 firmware version Can confirm this as well with my rb2011uias-2hnd, all bridges disappeared, all interfaces lost there settings (names, switchgroups etc) many more weird things as well, lucky I had a backup to restore, all is well after that. Will be staying away from 6.18 in a...

Weak power supply?

Same thing I was going to suggest

10mbit leds are not working on 2011 i get no led activity on 10mbit devices on the fast ethernet side. gig side it works fine? any update? ticket has been sitting there for weeks now, along with ups issues Also having issues with the fast ethernet bank on 2011's with 6.7, no ethernet activity with ...

http://www.paessler.com/tools/snmptesteris a tool I quite often use to debug snmp (free as well)

我丢失的东西在5.22但Winbox线吗less settings, NV2 Tab a heap of settings missing, TDMA Period Cell radius etc only field there now is the security check box and entry..

Only accessible by terminal now ?

Its always been quite high for myself, my 751 is usually pretty busy.

Yup 5.18 and upgraded to the new boot loader, the same issues with certain devices still exist re: power saving.

Having the same problems as vihai, but with a Acer A500 tablet & RB751G Once connected to the rb751 there are no problems, but once the device goes into power saving mode/std-by and is awoken it will hardly pass any traffic. I have to disable the wifi on the tablet and reconnect to get any kind ...

Thanks you for writing this script nicholwee, it's been working a treat.

(silly question) but how are you rebooting the router, a power cycle I have found will not work for an upgrade.

Make sure you /system reboot for the upgrade to take place.

Did a bit more playing around last night to try and find a little more about this bug. The pppoe connection will also drop when the first device connects to wlan1, any other devices that connect or disconnect to wlan1 will not drop the pppoe connection, as long as one device connected & has regi...

I have a ADSL2 modem bridged to my RB751G running v5.14 pppoe is attached to my local bridge, wlan1, ether1, ether2, bridged back to my adsl modem on ether1. It's doing the same thing, when ever the last device on wlan1 disconnects the pppoe session disconnects and redials. It's a pretty annoying bu...