After update to 6.43.4 the ubiquiti client doesn't get prefix anymore and router throws above error continuously.

W60G
there is no option to adjust txpower? On shortlink we can't get higher than MCS4.

How short link? W60G is up to 100m. (Without reserve up to 130m)

25m

W60G
there is no option to adjust txpower? On shortlink we can't get higher than MCS4.

似乎there is a MTU on EoIP bug in 6.37 - 6.39. Updating to 6.40.3 fixed the issue for me.

RouterOs6.38.5 and AirOs AF3.2.1. But i tried also with laptop and router connected to FiberPoe ethernet port, without success

我尝试连接combiport CCR1009-7G-1C-1S+ with S-31DLC20D fiber module to UBNT FiberPoe Converter with S-31DLC20D. Link doesn't go up. Exactly same setup on CCR 1009-8G-1S-1S+ with S-31DLC20D fiber module to UBNT FiberPoe Converter with S-31DLC20D works. Connecting both routers CCR 1009-8G...

thanks, this script could be usefull .... i had same idea, store information about used prefix/pppoe user from routing table ... prefer static ipv6 delegated prefix, most of our client prefer same address (static AAAA dns etc ... )

To achive this you configure every client manually?

Hi, i want to share a fasthack workaround for our ISP We use radiusdma server and pppoe servers with static ipv6 default route. This script runs on cron minutely and saves any change of ipv6 routes on pppoe server to file. #!/bin/bash dateAndTime=$(date +"%Y-%m-%d-%H.%M.%S") basedir="...

Hello, Routeros 6.38.1 PPPOE Server with DHCPv6 PD enabled. IPv6 pool: Prefix xxxx:yyyy::/52 Prefix length: 64 Client: Ubnt Airos6: DHCPv6 client on pppoe, Prefix Delegation with statefull DHCPv6 Server, IPv6 Prefix Length: 64 on lan. Everything works correctly with IPv6, but on PPPOE Server i get t...

+1 for Delegated-IPv6-Prefix Attribute

Send me a PM.

If we have multiple public IPs, shouldn't there be a way to force all skype clients to use one specific "public IP for skype", manipulating the not crypted NAck packets?

Have you found a working solution?
We have same problem.

I mean something like this:

Download UPS MIB from somewhere and you will see which OID use and how... snmpwalk ....|grep 1.3.6.1.2.1.33 .1.3.6.1.2.1.33.1.1.2.0 = STRING: "Smart-UPS SC420 " .1.3.6.1.2.1.33.1.1.3.0 = STRING: "725.1.I" .1.3.6.1.2.1.33.1.2.1.0 = INTEGER: 2 #battery status .1.3.6.1.2.1.33.1.2.3...

Hmm,
I have RB450G and X86, with 5.4 and APc-UPS on serial line and I do not get any information about for example line voltage with snmp.
I get UPS model and version but nothing else.

May be I do anything wrong??

Did not work for me with ROS5.2 so I post my modifications. I use two probes, one for battery charge and the other for line voltage. Functions: ups_available array_size(ros_command("/system ups monitor ups1 once")) ups_status if (string_substring(ros_command("/system ups monitor ups1 ...