What happens if you add them one at a time? i.e. Your command line but with gateway=lte1 Then, same command with gateway=lte2. Do you get two entries? The conversion of "lte1, lte2" to 0.0.0.0 seems odd. I'd try it here but I downgraded my test router back to v6, swapped it into production...

Hi ...

I was talking about my post a few days back. BGP out-bound route filters
don't seem to work; in-bound is ok.

Reiney

Any news on whether route filters are working? Is there somewhere else that people who paid for a beta license can get support?

Hi All ... I'm trying desperately to get a v6 config running on v7 beta 6. I need OSPF and BGP to be working and I am almost there; except I can't get outgoing BGP route filters to work. The session to my test router is up, and my input filters work and I can receive route updates. I can send update...

Does the WAN router have a route for DESTINATION 192.168.0.0 / ??? listing the "Aircontrol" router as the next hop?
Otherwise the ping reply won't get back ...

Hi All, I am trying to bring up a second BGP session on a new circuit to an existing provider (with an existing BGP session). So, for example I have an established session from my AS to Provider-1 over a 200 Mbps Metro-E circuit. I'm trying to establish a second session from my AS to Provider-1 over...

仍然在寻找修复。出现,MikroTik's ntp response packet is somehow not valid: XM.v5.5.6# ntpclient -d -h 172.16.2.3 Configuration: -c probe_count 0 -d (debug) 1 -g goodness 0 -h hostname 172.16.2.3 -i interval 600 -l live 0 -p local_port 0 -q min_delay 800.000000 -s set_clo...

I just set up a test system with my spare router and installed 5.24 along with the ntp package. Still no luck; it is exhibiting the same behaviour as the other system. Is there additional documentation for the ntp server? On a system with multiple interfaces, (and say a linux-based ntp), there are u...

Hi All, I'm trying to get the ntp server running under 5.5. It is installed and running but will not respond to queries. The router has 3 LAN and one WAN interface; no luck on any of them. The standard ntp client on the router is configured and synced with an "outside" server. Tried the sr...

Ah ... Now I get it!

Thanks so much for the great examples,
~Reiney

That really doesn't work either ... Here's a "fresh" example: The goal: Supply a connection name ("main-2" in this example), and issue a "/ppp active remove xx" command to drop the specified connection. This is what /ppp active print returns: [admin@rb0-dj2] /system scr...

Thanks for the reply. Unfortunately, none of the examples you mention seem to work. The interfaces I am trying to remove have been dynamically created via PPP. What does work is to do something like "/ppp active remove xx" where "xx" is the "item number" you see when do...

Hi All, I'm creating a script to reset selected PPPoE connections. I am trying to read the internal menu ID number (ie. stuff it in to a variable of the correct type). A "put" of the whole string for a selected connection shows ".id" as the variable name but I can't seem to use t...

Thanks Aug,

Thant's what I was looking for ...


Have a great day!

...forgot to ask: Can't I just download the NTP package for 5.5? System is in production
and working fine; just need the NTP server ...

Thank you!

~Reiney

Hello, I have MaxxWave hardware (X86)running what it says is "Version 5.5". I'm looking for the NTP package that will work with this platform. I'm a little confused as to how my system is 5.5 when the latest release from MikroTik is 5.19. Will NTP from 5.19, X86 work? Thanks in advance! ~R...

Hi, I have routerboards talking OSPF w/ a Juniper. Have not seen your problem yet but if you do have 450s that are working, I would check the software/firmware versions on the busted one against the others. It has to be a config/software problem on that particular 450 if you know that the network is...

Hi All, I've been running Routerboards and FreeRadius for PPPoE Internet access for some of our members; we're a co-op WISP. All is working fine except I cannot get bursting to work. It seems that no matter what I set the Mikrotik-Rate-Limit string to be, only the first (rate limit) parameter will t...

Hi All, I'm having problems getting a vpn connection set up between a MT RB450G and a Mac OSX machine. IpSec is not working and gives the error message "couldn't find configuration". I'm using pre-shared keys. Is there a way to get more detailed log info on exactly what configuration is be...

Hello Stefano,

What did you need to do to get it working? I am having the same problem.


Thank you!

~Reiney

So ..... anyone have redundant servers working?

What happens when you test an id on the FR server itself
with the "radtest" utility. If that works, then your FR server
would seem to be ok.

Hello, I thought I would share my experience of recently setting up redundant PPPoE servers w/ RADIUS. So far, it would seem that redundancy is not possible. I am testing on a small portion of our 400 CPEs. We are a WISP and the PPPoE servers (RB493s) are located in our central location. I have both...

Thanks!

I've got the timeout set for 10 seconds; probably a little too long but I'm just in the testing phase for now ...

Can a second ip address be specified for a backup RADIUS server?
ie. if the primary is down, then the RB will attempt to contact the secondary.

Can't find this anywhere in the Wiki; suspect there are some creative work-arounds
out there.

Many thanks ...

Hello, I am in the process of transitioning a 400+ CPE wireless network from a bridged to a routed topology. Eminating from our central office are six backhaul links which fan-out to associated APs and clients. I am going to be using PPPoE, RADIUS, and OSPF for client connections and I have this par...

Hello, I am about to set up the same thing but my RADIUS server is handing out static, public, ip addresses. What I am trying to figure out is how to route packets coming back in (from Internet). How do I know which of the two MikroTik PPPoE servers is the appropriate "next hop"? Thanks, R...