tried 12v 1500ma and 24v 1500 ma both via jack, both failed
too, just like the included power supply,

I tried another microusb to usb adaptor, not the included one, still fails!

Just for the record, changing the power supply to a bigger MA one makes no difference, external power to USB port must be applied somehow, thank you!

Hello, thank you for help, I will try another mikrotik power supply, even some usb usb flash drives become unstable due to lack of power, If I connect a usb hub with external supply it work flawlessly, I was trying to avoid the external supply because I don't want that much wiring, thank you all

Hello all, I own a RB2011UiAS-2HnD-IN, which features a micro USB connector, using the included adaptor I can plug a USB 2.5" hard drive for samba share, the hard drive becomes unstable (weird noises inside the disc) I think it is related to RB2011UiAS-2HnD-IN not providing 5v 500ma from the us...

Found this antenna:http://www.ispsupplies.com/categories/5 ... nna_3.html

5.8ghz, outdoor ready, 5dBi, omni, works, inexpensive!!

Hello I am planning a wireless network for a small hotel with the following setup: -4x Basebox2 AP with 2x 2.4ghz dipole antenna (for clients) + 5.8ghz minipci-e card working as mesh or WDS (for AP inter communication). I need a 5.8ghz omni antenna with rp-sma for outdoors, like the one who mikrotik...

Found this gem in Durango, Mexico hotel.

Found this expensive card, I would prefer to buy a cheap 5.8 AP instead of this: (ATHEROS)http://www.amazon.com/AirLive-X-USB-802 ... ds=airlive

Hello, I own a RB2011UAS-2HnD-IN (RouterOS 6.4), it lacks the 802.11a/n but it features 802.11b/g/n, I want to make it dual band, since it lacks mini pci, the only viable option is USB, does anyone know a working USB wireless card? I think it must be: Atheros and USB, any compatible one? Thank you i...

Hello, same happened to me, I bought 4 of these APs, 2 of them had the same problem, WIFI were unstable, it kinda worked for a while after a reboot, but still unstable, I have tried everything, I reached support, after several mails and weeks, they ask me to send them to RMA, dont waste your time, t...

Just to report, I contacted support [Ticket#2013070566000876], they suggested to disable the b rates and using only g and n rates, which didn't worked, also I tried ONLY-G mode, it didn't worked also. I bought 4 devices, all of them same settings and installation, 2 work, 2 fail, which suggest that ...

Wow, I feel better know knowing that I am not the only one with this problem, I will discuss it better in that threat, I also contacted support. thank you

Thank you Troy for pointing me about this thread, well I have 4 Metal2SHPn, exactly same settings, adaptive-noise-inmunity is set to ap and client, what support suggested about this?

If settings were a problem now, why 2 works and 2 dont!

Wifi card is unreliable, exactly as you described!

Hello, have anyone experienced this before: -on a building (outside) I have 4 Metal2SHPn for WIFI coverage (with the same type of UTP, distance, settings), acting just as AP. 2 or them work perfect!, the other 2 have a weird problem, WIFI interface stops working after 1-2 days, the device works, but...

Please provide configuration for this to make it work, thank you!

Good news for Mac owners

Using crossover starting from version 12.2.0, (using mac driver) you can finally drag files to winbox, I already tested and works perfectly!

Greetings

Just a quick reply, changing rate from advanced to legacy seems to work fine, I will keep doing tests and reply later, btw wireless is in 20mhz, mode b/g/n, dual chain.

I feel fine knowing that I am not the only one I am experiencing the same problem Router: Device: RB2011UAS-2HnD-IN Version: 5.24 Devices: iPhone 3gs (IOS 6.1.3) iPad 2 WIFI model (IOS 6.1.3) before, everything was running perfect with all same settings, but I dont know if it is related to Mikrotik'...

Hello Ibersystens, thank u for sharing this knowledge, can u please post fake dhcp script and bad signal client kick please?

I have a few teensy over there, I have successfully communicate from PC to Teensy using USB and linux, but dont know about Mikrotik. By the way Arduino for what you need: http://www.ebay.com/itm/UNO-ATMEGA-328-ATmega-8U2-For-ARDUINOs-IDE-Ethernet-Shield-W5100-/321060834218?pt=LH_DefaultDomain_0&...

Try radius from dmasoftlab

Hello I dont know if there is a rs232 mikrotik workaround to do this, but I have done that using ethernet arduino uno, you need one of them on every mikrotik, 5 in total.

I think u can bridge from gopro camera with an ap acting as client and nat (to avoid ip conflict) when u connect more than one gopro

Nao vai a conseguir achuda tao facil, melhor tenta escriber ingles

I made a workaround for Winbox Mac. Instructions: 1.- Download https://dl.dropbox.com/s/b8zkqy9a1lqunqi/Winbox.zip 2.- Unzip the file to your Applications folder, It will run ONLY from there. Notes: -Tested up to OSX 10.8.2. -Can run multiple instances. -"New terminal" window characters ar...

Thank you for the Hairpin NAT help, it works with this rule:

/ip firewall nat add chain=srcnat src-address=192.168.0.0/24 dst-address=192.168.0.20 protocol=tcp dst-port=8090 action=masquerade

Thank you, I actually have a masquerade rule, should I remove that one or can I have both?

Hello, I have the following scenario: Mikrotik 3.30 Ethernet 1: WAN (pppoe dialing) external IP 189.186.17x.xxx Ethernet 2: LAN, DHCP 192.168.0.0/24 -I have a computer 1 (connected to my LAN), listening to port 8090, IP 192.168.0.20 I want that port 8090 to be reach from outside WAN (internet), so I...

Hello, thank you for your help, I fixed with the same hardware, but instead of SFQ (creating a queue for each host when log in) (this method is used by default when you set up the hotspot from the wizard). Fix it this way: -Dont set or remove any bandwidth speed for hotspot users. -Create a PCQ rule...

Hello, I manage an hotel hotspot which have a basic configuration: ppoe dsl--->mikrotik RB750 fw 4.16--->a few APs wired to the mikrotik. hotspot was configured using the wizard on winbox, and I use external AAA radius auth. Well I configured the mikrotik as hotspot (which is installed on office), i...