MikroTik - Search

gustkiller

Having the same problem here with a 1036
Cpu goes 100% unable to make suppout file.

The profile shows 100% cpu firewall usage. Disabled NAT/Contrack and now the 100% cpu usage is from a PCQ queue.

gustkiller

You are correct.

Maybe it can be a new feature for Mikrotik. Because on Junos and IOS you can disable ECMP .

gustkiller

You are correct.

Maybe it can be a new feature for Mikrotik. Because on Junos and IOS you can disable ECMP .

gustkiller

Configuring the Source Address for Locally Generated TCP/IP Packets By default, the source address included in locally generated Transmission Control Protocol/IP (TCP/IP) packets, such as FTP traffic, and in User Datagram Protocol (UDP) and IP packets, such as Network Time Protocol (NTP) requests, i...

gustkiller

Yes,

If you have two links between routers, just change the interface cost ( rise it ) of the one you need to be at standby.

gustkiller

What's new in 6.0rc14:

*) route - automatically repair FIB inconsistencies;

I wonder whether it will fix those 'stuck routes'...

Finally, let's test it.

Enviado de meu GT-N7100 usando o Tapatalk 2

gustkiller

any news on MPLS ECMP?

gustkiller

Hello Dobby, Hello Gustkiller, Same here. We have to deploy a juniper MX5 to be our edge/core router. After 8 months with it, I don't remember any routing bug or issue. I'm really looking forward to RouterOS routing package improvements to buy the ccrs to be access and distribution routers, even to ...

gustkiller

Same here. We have to deploy a juniper MX5 to be our edge/core router. After 8 months with it, I don't remember any routing bug or issue. I'm really looking forward to RouterOS routing package improvements to buy the ccrs to be access and distribution routers, even to be in HA vrrp setup with the ju...

gustkiller

Yes! Make the entry static and set the Cost.

gustkiller

It's pretty simple.

You only need to put a higher cost on the OSPF INTERFACE that connects to Router C on the OSPF interface settings in ROUTER B.

For instance, change from default 10 to 20.

This should do the trick.

gustkiller

with new routing package?

gustkiller

In the absence of any meaningful response from MikroTik, has anyone found a workaround short of rebooting the router every X hours ? I have the same problem with two routers (out of several hundred). Neither do any advanced routing (OSPF, BGP), but both use bridges to terminate VLANs. Each will inv...

gustkiller

Great comment! Here we have to buy a Juniper MX router that cost here about U$30K dollars, but in the last 8 months since we change our x86 mikrotik border router with the Juniper, we have yet to see any kind of issue or hicup. Sometimes I really forget that we have a router running here. I really &...

gustkiller

Awesome pricing!

gustkiller

holy cow! It works! Thank you!

gustkiller

yep, I know, lack of search by ip being covered by some network was discussed long ago, that's why I didn't comment that

LOL

gustkiller

Print detail worked, but not with a single ip search. The advantage of junos and ios is that we dont have to know or predict what is the entire network ou prefix to find out information about it. Just a single ip address from that prefix will bring the information about the prefix that IP address be...

gustkiller

Already possible with /ip route print where bgp Not like juniper and cisco. See below Juniper gustavo@BRD01> show route 177.66.x00.1 ( just show route with a unique IP not the prefix) inet.0: 425051 destinations, 426119 routes (425042 active, 8 holddown, 25 hidden) + = Active Route, - = Last Active...

gustkiller

show ip bgp ( cisco) ou show route (juniper) like routing search in cli.

gustkiller

我放弃了…冲击:你好,库尔特,我是其中之一users connected to PTT-SP and saw a thread on [GTER] list about that problem just after my first post here. Also... I definitely agree with you about mikrotik must increase priority to solve this bug. C`mon Mikrotik help us to keep supporting your pr...

gustkiller

Here I discovered the root cause of that issue with tunnels. UBNT airmax, when I turned the AIRMAX off, the ping latency time get the same inside the tunnel than outside.

gustkiller

Having the same problem here.

gustkiller

I hope that the version 6 have the stuck staled bgp routes bug fixed. ( since 4.x)

gustkiller

Hi... You should take in consider that BGP need time to be updated.. its not like of other routing protocol.. update the route DB as soon ad there is change apear in network..!! So you have to wait even my take up to 5min..!!!! till most of Upstream provider got the update..!! Also there is another...

gustkiller

Hi, Still present, yesterday I have the same issue again with a router with a low route count ( about 300 routes). I had to disable and reenable the interface that had the stale stuck route and everything back to work.. I don't know why RouterOS guys fix this or create a tool to clear the route cach...

gustkiller

I think Mikrotik are in trouble now. a 99U$ routerboard that if the tests are true beats hard the AH x2 performance, they "Mikrotik" will have to do something. And it's will be a good battle!

gustkiller

Just got into that problem. a lot of packet loss with only 50mbits traffic. Going to change the port today.

gustkiller

Any news on that issue?

gustkiller

Hi,

Anyone here already tried mpls with Router OS and Juniper devices? Any issues at all? I´m asking about BGP based VPLS services and LDP.

gustkiller

today a guy in brazil told that he received a sample of the cloud core.
i dont know if its true because i asked for pictures, but he not sent yet.

this is absolutely not possible

I liked the

..

gustkiller

today a guy in brazil told that he received a sample of the cloud core.
i dont know if its true because i asked for pictures, but he not sent yet.

gustkiller

Hi,

Just get the information from an local isp forum, that a local isp received a sample of the cloud router. I asked for photos ...
Until I get those pictures, I would like to know of course if that information is true, how can we order sample cloud routers for testing purpose?

gustkiller

when it gets a dual power supply, it could be a good backup edge router for our MX5.

gustkiller

I get nothing on my support ticket about this issue....

gustkiller

http://www.tilera.com/sites/default/fil ... 010-01.pdf

Datasheet of the processor. I think this is the right one, becouse the Cache size announced is the same as the processor above.

gustkiller

Finally!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

gustkiller

Worked.

I was unable to uninstall unused packages, when tried that, i got the message about system reboot because of kernel failure.
So I tried to just upload the used packages from the zip file and worked.

gustkiller

removed packages but no go. I will try another day with separated packages. This router is 20miles away.

gustkiller

I had this problem before with older models with small flash. Before updating, try to uninstall any unused packages, reboot to complete the uninstall. See that there is at least 30 megs free space. Then upload the separate packages and not the combined one, reboot to complete the update. Then maybe...

gustkiller

Just rebooted, now i can delete files, but unable to update. When tried, i got the log message ( system reboot because kernel failure).

gustkiller

My AHx2 now cant delete any file. And I cant reboot because its on a large pop. I am worried if i reboot it it may never back again.

gustkiller

Tomorrow going to see how fast the x2 is! Change a RB1100 overclocket to 999mhz thats is getting 95% to a x2!

gustkiller

anyone tried on x86?

gustkiller

I have that problem with autoneg on rb1100 with Licensed NEC Pasolink Radios. If We turn autoneg off and set full duplex and full. the Nec port gets Up but RB never get up. We tried even with machine made certified patch cables and no go. And that's happens randomly, like once a week, or 20 times in...

gustkiller

感谢你对这只虫子的声明。请人事处en a support ticket. So way the MikroTik trama will see that more ppl have the same stuck route problema.

gustkiller

thanks!

gustkiller

Hi, Every now and them we got that problem. Today another AS network engineer called me becouse his IP prefix couldnt reach our prefixes. After troubleshooting he told me that they lost they connection in a national wide IXP and when doing a traceroute from our bgp router, the next hop showed was ou...

gustkiller

Support for ECMP labels for mpls ( so we can have dual or more paths to the same destination working).
Support BGP BASED LABEL Distribution for mpls
Support L2 MTU settings like Routerboards

gustkiller

that will be awesome!

gustkiller

Just sendind two suppouts from two rbs with that problem.

gustkiller

Hi, Since 5.x SNMP support is has been buggy! We have a lot of RB1100 in our POPS and our monitoring graphs never works as it should. The SNMP server on those routerboard suddently stop working. On friday after a lot of fight to put Cacti to get responses from the RB SNMP SERVER. Worked but today th...

gustkiller

RouterOS firsts need ECMP for MPLS first. There is a lot people that have several links between routers for redundancy / more troughtput like us and with ldp enable, the Routers OS only sets a label for the first gateway. The other ECMP gateways dont get labels.. So no traffic is forwarded trought ...

gustkiller

RouterOS firsts need ECMP for MPLS first. There is a lot people that have several links between routers for redundancy / more troughtput like us and with ldp enable, the Routers OS only sets a label for the first gateway. The other ECMP gateways dont get labels.. So no traffic is forwarded trought t...

gustkiller

any news?

gustkiller

any news on that?

gustkiller

I prefer mikrotik routerOS to support ASN identification in trafficflow (NETFLOW).

gustkiller

thanks!

gustkiller

Hi,

After doing some research, I didn't found a ipk package for metarouterPPC( RB1100) with asterisk.

Anyone know how to install or compile asterisk for powerpc metarouter?

Thanks!

gustkiller

thanks!

gustkiller

anyone running 5.2 is getting stuck bgp routes after peer down? i have a two main bgp routers and thei are interconected via ibgp. on the first router i just lost a peer to an exchange point. so a lost about 5k routes from them. but the lost routes are stuck in both routers, the routing table didnt ...

gustkiller

Hi, I'm trying to setup a vpls or eompls between a cisco 7206 and a rb1100 with ros 5.0. There's already a bgp based vpls between this rb1100 and another router os 5.0 running on a x86 server. Today i started to play with a 7206 vxr and this cisco doesnt support bgp based vpls. So i tried to make a ...

gustkiller

great news! all that I can tell is that the routing process issue that I described above have been fixed!!!

ps: uptime is about 4 hours and i've done a lot of testing , trying to trigger the routing process crash and they didn't crashed or restarted!!!!!!!!!!!!!!

Thanks mikrotik support team!

gustkiller

Pdf doesnt mention what is the AH x2 CPU frequency and model.

gustkiller

RB1200 - ten gigabit ethernet, 512 MB ram, L6, 1U case
RB2011 - 1 SFP, 5 10/100 ethernet, 5 gigabit ethernet, wallmount case

what cpu have rb1200 and rb2011?

gustkiller

So it seems related to OSPF.
Let us know when they will provide you about the fix.

Thanks.

sure!

gustkiller

may you elaborate a bit in what cases it crashes? because i have two MT routers (v5 rc5) with two full bgp feeders and they are not crashing. thanks Ros As mrz said, i have a very specific setup. Two MT routers that works as a core/edge routers running multiple full feeds , some upstream bgp sessio...

gustkiller

normis, Did routing process issue had been detected and fixed? i gave access to all my routers to mikrotiks support, and i have no signal from Maris for a couple days. i hope they managed to find that issue. rc11 is out. Does it include the fix about this routing problem? thanks Ros Rpingar, As mrv...

gustkiller

normis, Did routing process issue had been detected and fixed? i gave access to all my routers to mikrotiks support, and i have no signal from Maris for a couple days. i hope they managed to find that issue. Not yet, we are working on it! Thanks mrz! and mikrotik team for all the support on this is...

gustkiller

normis,

Did routing process issue had been detected and fixed? i gave access to all my routers to mikrotiks support, and i have no signal from Maris for a couple days. i hope they managed to find that issue.

gustkiller

我敢肯定at a super high performance with 2gbits or more wirespeed 64bytes packets with all features on, even its five thousands dollars or more will worth every penny. here we have a lot of space to use those type of routers! Mikrotik for the win!

gustkiller

Isn't teasing nice

FCPGA / ASIC detected

. And yes i have hope!

gustkiller

ok!

gustkiller

i have one rb1100 with the same problem

if i trigger a system reboot command, the routerboard never came back again. only if i took the power off and on.

no console messages.

gustkiller

Would be good if RouterOs support those NETFCPGA for wirespeed packet processing and forwarding on x86.

http://www.netfpga.org/php/specs.php

gustkiller

thank you so much mrz for this and for your and maris support about our routing process crash/restart.

gustkiller

Hi,

While we're working with Mikrotik Support Team with a routing problem, i need help with you script masters, for an easy script thats monitors cpu usage, and if CPU gets 100% for at least 30seconds the scripts auto runs a system reboot command.

Thanks!

gustkiller

where's multicore , fcpga, hardware forwarding?

gustkiller

the routing process crash / restart have been fixed? the last version i tried was 5.0rc7 , on x86 the ospf / bgp process restart just after some ospf neighbor goes down, and the routerboard version mipsbe the routing process gets 100% and nevers came back.. Please contact support about this problem...

gustkiller

the routing process crash / restart have been fixed?

the last version i tried was 5.0rc7 , on x86 the ospf / bgp process restart just after some ospf neighbor goes down, and the routerboard version mipsbe the routing process gets 100% and nevers came back..

gustkiller

it is a HP Proliant ML 350 # DEVICE VENDOR NAME IRQ 0 01:04.6 Hewlett-Packard Company Proliant iLO2 virtual UART (... 11 1 01:04.4 Hewlett-Packard Company Proliant iLO2 virtual USB co... 11 2 01:04.2 Compaq Computer Corporation Integrated Lights Out Proce... 11 3 01:04.0 Compaq Computer Corporation ...

gustkiller

Support ECMP routes with MPLS/LDP: In current state, a network with a lot of ecmp routes via ospf ( with multiple links) when LDP is enabled, only one of the multiple routes gets a label, so all traffic goes only to one path and doing bonding and another work arrounds like create vpls and bonding th...

gustkiller

which other users? routing crash was fixed after v4.13, as the "other user" beccara confirmed. I know of no routing crashes, and we have no such reports in support. OK gonna try the newer one but if you read the beccara post, u will see that his statement is about its have been fixed for ...

gustkiller

we're using 4.13 on 450G's and rc5.05 on our two x86 core routers. if you are using such old version, why are you reporting about crashes in v4.16? its quite simple Normis. Becouse other users are still having the same problem, and most important, since 4.13 till 4.16 there's no changelog about the...

gustkiller

Yes . since a long time ago . first i thought it is a problem in pppoe but mikrotik support said the problem was routing crash . i have sent more than 30 supouts to them with different versions. It's bad becouse U and I have a problem, but it's good becouse we're not alone with that problem. I hope...

gustkiller

I would like to ask if the 100% cpu issue is fixed in 4.16. I have that problem in 433ah with v4.1 every 5 days. My guess is that it is just a bug on the display and not actuall situation of 100% cpu usage since I don't get any lags, I connect to winbox and I change everything fast, etc. What do yo...

gustkiller

Yes . since a long time ago . first i thought it is a problem in pppoe but mikrotik support said the problem was routing crash . i have sent more than 30 supouts to them with different versions. It's bad becouse U and I have a problem, but it's good becouse we're not alone with that problem. I hope...

gustkiller

routing process crash fixed?

did you report it to support ?

Ticket#2010080466000112

omidksonri are u having routing crash too?

gustkiller

Routing crash was fixed for us in 4.13 I updated a lot of our pop routers to 4.13 and some of them still crashes ( 100% cpu and no routing at all) and our 5Rc05 differs from the 4.13 because they just resets the routing proccess as i said before. we run version 5 because its the one that works with...

gustkiller

did you report it to support ?

yep! since dec 03

Ticket#2010120266000564 last update from me was five days ago with new suppout files from the lastast crash.

gustkiller

routing process crash fixed? which version introduced it? for me since 4.10. for some reason when a routerboard running ospf and ibgp shutdown or reboot, some routers on network crashed the routing process ( the cpu goes 100%) and only goes back with a reboot. everything related to routing goes dow...

gustkiller

routing process crash fixed?

gustkiller

- revolutionary new products ASIC OU FPGA BASED ROUTERBOARD? RB2000? :D i will get blown away! you're looking at wrong place, look here: This price includes: •Free gated car parking •Free Hotel's Oriental Spa •Free Wellness and Fitness Centre •Free WIFI-based internet access •50% discount from Aqua...

gustkiller

- revolutionary new products

ASIC OU FPGA BASED ROUTERBOARD? RB2000?

i will get blown away!

gustkiller

17 hours with RC05 on our core routers and no bgp process reset caused by ospf crash yet!

gustkiller

Beccara, we're experiencing these problem too, very sad! we have a lot of routers on our pops and some of them when something happens to ospf like a neighbor down, or we just change some router ospf priority, some routers crashs ( 100% cpu) and all routes goes away and we have to do a system reboot....

gustkiller

here every rb450g takes about 3 ~ 5 minutes at most!

gustkiller

Hi, We're having some problem with ebgp peers. if for some reason the bgp session goes down, and come back on from remote peer, the mikrotik bgp state for that peer keeps in "OPENSENT" state and i have to manualy disable and reenable the bgp session. There's any way to monitor the bgp sess...

gustkiller

That will help!!!
Thanks!

It is not possible to add L2MTU for every NIC in the world. We will consider adding a feature similar to Ciscos "ospf mtu-ignore"

gustkiller

Thanks MRZ, gonna try that workaroud in LAB. Any ETA about X86 work as Routerboards that we only need to change MPLS MTU to get packets bigger goes trhu? So we dont need to mess with Ethernet Interface MTU? Because as you know if i change Interface MTU Ospf will broke because its checks the mtu. As ...

gustkiller

On X86, if ethernet card supports jumbo frames, you can set MTU larger than 1500 The problem is about MPLS MTU or (l2MTU reading) if i set anything bigger on MPLS MTU , all frames generated from a vpls from a RB450G for example to the X86 Machine will be discarded. After some time testing it, i dis...

gustkiller

Thanks!! Hi, As you know , mikrotik mpls implementation only binds one label for ECMP routes, with that, mpls forward using multiple path is broken as only one path is used to forward traffic. As our network have a lot of ECMP paths , we had to disable LDP. The workaroud to use VPLS tunnels is witho...

gustkiller

Hi, As you know , mikrotik mpls implementation only binds one label for ECMP routes, with that, mpls forward using multiple path is broken as only one path is used to forward traffic. As our network have a lot of ECMP paths , we had to disable LDP. The workaroud to use VPLS tunnels is without ldp is...

gustkiller

Hi, I have some border routers running x86 version of routerOS. A few weeks ago i posted about the current mpls ldp implementation that only add on label to ecmp routes so its broken ecmp traffic. Then i worked arround and with Te ( RSVP) i was able to run bgp based vpls tunnels. With the default co...

gustkiller

Here, is the one hot blondies i was talking about..

http://www.mdbrasil.com.br/images/album ... 9491_g.jpg

Er, the 'Hot Blondies' is my Mother.

She is pschizofrenic, and often manifests like that.

You can call her on 089855555555555555555555555555555555555555

gustkiller

Cool MUM!

lots of people!

Anyone took pictures from the hot blondies?

gustkiller

its now working, since rc2

gustkiller

now normis presentation!!!

gustkiller

i'm just behind you normis hehehe LOL.

just happened claps for normis

gustkiller

we´re running rc02 , 15 days uptime, no problem . we had a lot of problems caused by the ospf crash.

gustkiller

Dont bring you logic here :P We're in the same boat with the OSPF bug causing full routing crash's. Known problems that caused OSPF to crash are fixed and these fixes were backported to v4.13. If you still have OSPF crashes with v4.13 then you have to contact support with new supout files. Have you...

gustkiller

Don't worry , you will get your skin burned by the SUN.

I live here ( Salvador) and we're having a sunny and hot day.

gustkiller

No, even BGP based VPLS still needs LDP

Is this still the case if using OSPF MPLS-TE?

i tried ospf mpls-te and doesnt work either

gustkiller

mrz, thanks for your support, but i think i cant use mpls here, going to stick with Eoip tunnels, because lack of support in ecmp for labels. in our network we have a lot of dual or triple links for redundance and load balancing that is working great using OSPF. the last example you made would work ...

gustkiller

here a screenshot. ldp disabled. bgp vpls setup and only our core router appears the dynamic mpls interface, the second router doesnt appears the interface.

gustkiller

n1 can help? is really possible to use vpls and Te without LDP enabled? As i said before, the current ldp implementation kills ecmp that is essential for our network.

gustkiller

Is snmp working when running full bgp table, and just for monitor interface traffic?

gustkiller

mpls ecmp support ( forward using two or more destinations even using mpls)
bgp support ldp

gustkiller

mrz, something strange is hapenening i´m testing it with 3 routers , i need a vpls beetwen Router A and Router C A ---- B ----- C Router A is a route reflector, router b and c are route reflect clients, ospf is redistributing only loopback address. Bgp redistributing static and conected routes, l2vp...

gustkiller

Thanks,

setting up a bgp signaled tunnel now!

gustkiller

we too have a lot of ml 350 with smart arrays. now i´m using USB STICK to run mikrotik on it.

gustkiller

Or any way to use VPLS without LDP ?

gustkiller

ECMP MPLS supports equal-cost multipath (ECMP) labels. A nonconfigurable maximum of 16 MPLS paths is supported. On LERs, MPLS ECMP next hops can be used in the IP routing table for non-VPN and VPN routes. On LSRs, an incoming label can point to either an MPLS ECMP next hop or an IP ECMP. The signali...

gustkiller

thanks for the quick answer.

Any way to use mpls and dont loss the equal coast multipath ?

gustkiller

Hi, We have a lot of pops with at least two paths via licensed microwave radios. everything were working fine, ospf making equal cost multipath perfectly. Yesterday i enabled mpls in our routers and its just killed the equal coast multipath overloading one radio and the second link with almost no tr...

gustkiller

here so far so good, dispite the rx drops about 3k a day..

gustkiller

have the same problem here

one router the vpls interface is running the other one not..

gustkiller

torch working here (x86)

gustkiller

finally,

going to test it tonight!

gustkiller

as i posted before, o have an hp that should have work with the ciss driver like any other linux, and tested the pre-release version and it did not worked .. doesnt recognize the Virtual drive.

gustkiller

are u running some routing procotol like ospf and bgp? here i have a lot of problems with ospf with rc01 and rc02 prerelease even router crashes. i turned of ospf and the rx drops goes 99.9% away. yesterday i have a router crash because i changed some bgp settings, from next hop self to default. :( ...

gustkiller

any news about that?

on rc1 with bgp, bgp not crashed but snmp yes. no longer able to get interface statistics via snmp. its worked for about 12 hours and them stop responding snmp gets from cacti.

gustkiller

We have planned a change from ospf to ibgp to carry our internal routes , but we will still need to use ospf for loopback address and loadbalance. For make that transition we have both protocols running at the same time with all our igp prefixes to not disrupt the network until we finish the job. So...

gustkiller

i hope the ospf problem have been fixed until 5rc2 . i had to disable ospf in our two bgp routers

just put a cisco l3 switch to do the ospf DR/BDR job with a static default route to our bgp routers

gustkiller

i had that problem too. One of our PoPs had an electrical power and the power inverter was not sending 110v to the power supply. Then we have a quick interface flapping over and over, and ospf crashed! with 5.01 and r5.02 the problem is worse because the router reboots almost every day, and caused a...

gustkiller

just to keep you informed , i found out that the problem is caused by OSPF BUG in rc01 - rc02 prerelease. When i disabled ospf no more RX drops!

gustkiller

I live in Salvador / Bahia - Brazil

Be prepared for the hot sun! its been pretty hot here

avarage 30degree Celsius!

As Normis said, everyplace have unsafe areas. The Hotel where Mum is going to happen is pretty good and in a good location!

gustkiller

sure!!

.... Then I downgraded to rc1 because some problems with ospf.

Did you report about ospf bug? Because i'm intrested to use RC2 with ospf ...

gustkiller

it is a pre-release i received to test the HP Smartarray SCSI/SAS driver. Then I downgraded to rc1 because some problems with ospf.

gustkiller

Hi, I cant understand why we're getting rx drops. its an HP ML 350 Server with only intel pcixpress gigabit ethernet nics. low traffic and we're getting rx drops i tried to enable RPS on the interfaces that are getting drops, fixed one cpu to each card that having drops and still getting drops :-( a...

gustkiller

i can confirm that rc2 torch is working!! on x86

gustkiller

having the same problem

HP ML 350 2x Quad Core Xeon. Intel pci xpress nics , and only 5% cpu load using router OS 5 rc2 and i got rx drops

sad.

gustkiller

with the drivers, i shouldnt have problem with any kind of raid i did, becouse the Operational system will see the logical drives created in SaS controller as an physical disk. :( We have about 30 Hp servers and 12 of them are these big ml350 servers with that controller. these where bought to be ou...

gustkiller

ppl with DELL servers .. i'm trying a new RoS pre release that supports HP SAS Controller.(Smart Array)

i created via controler a Logical drive but mikrotik doesnt recognized it. ppl with dell megaraid controller , what you did to have the disk recognized in mikrotik?

gustkiller

Hi, We bought a couple HP Ml 350 Servers that only have SMART ARRAY SAS Controller :( So the only way to run RouterOS is install it in USB thumb stick. Yesterday i just installed and its running well but i´m worried about reliability. These Servers have an internal USB Connect só the thum stick stay...

gustkiller

Please, Add these scsi drivers, we have a bunch of hp servers, and i´m curretly running mikrotik on these via USB, but i´m afraid about kingston thumb drive reliability. and these servers only have that storage controller that doesnt have legacy mode. http://cciss.sourceforge.net/ Smart Array E200i ...

gustkiller

simple queues and torch for ipv6!!!!

gustkiller

... and presentations (pdf / ppt) downloads?

gustkiller

here you can see recording of the previous presentations:
http://www.ustream.tv/channel/mikrotik

below video

thankS!

gustkiller

cool,

can u post any news about the first presentation? ros 5 and new routerboard? i lost these...

gustkiller

Or ... you could find plane tickets to Colombia/Brazil MUM

see you in brazil

gustkiller

the problem running bgp on 4.x version is the lack of performance like multiqueing support for the newer intel nics. we're running 5.04 beta for bgp with about 5 feeds but only parcial routes and no problems at all. we're receiving 2 new hp servers to run two gig internet feed and enabling full rout...

gustkiller

thanks eising!! hope more ppl came here to tell they need that too.

it will even help to offload cpu as it does when using ospf with ldp, here on RB450g we get at least 15% less cpu using mpls forwarding.

gustkiller

we have two dl 160g6 and two ml110 g6.

gustkiller

here we have some hp dl servers, with ros 5.0beta4 for about a month without issues.

gustkiller

Any ideas when it will be available?

we only use ospf for distribute loopbacks and all our routes are learned and distrubuted via ibgp. thanks!

gustkiller

I have another problem

i have that same problem, but with beta 4

gustkiller

its not a shaper queue, i mean ethernet hardware queue on intel chip 82576 or 82575
Shaper queue (simple queue or queue tree) works fine on v5RC1, tested on 1300 simple queue and queue tree

how did u checked how many harware queues where been in use?

gustkiller

thanks mikrotik!!!!

kernel updated and *) added support for RPS (Receive Packet Steering) on multicore systems!!

COOOOOOOOOOOOOOOL!!!

gustkiller

wow !! lightining fast bgp and show ip bgp like commands?

gustkiller

We have lots of HP servers that need cciss (smart array) driver

gustkiller

任何一个already tried?
AS a layer 2 vpls ou l3 vpn (vrf) cpe using a Juniper box as PE?

gustkiller

here we really need ipv6 simple queues, for shape ipv6 users..

gustkiller

where did you downloaded beta 7?

gustkiller

beta 7? where??

gustkiller

the 5 beta is pretty stable , i have one here running all kind of stuff, BGP with some peers , simples queues and working fine for about 43 days

gustkiller

ospf will do that automagicaly if your links have the same ospf cost and router count.

gustkiller

FIP you resumed all our desire with mikrotik router.. even the asic support.

i would pay without thinking a thousand bucks or more for a license.

gustkiller

i'm experiencing some problems with updates.. sometimes a peer withdraw a route but mikrotik keeps it in the routing table.

gustkiller

i think, mikrotik must use bird bgp daemon, as its one of the best bgp daemons and kicks quagga ass! it was if i recall correctly the only bgp daemon that supported tests that crashed quagga.

gustkiller

i hope it get here before our new hp dl servers with those nics arrives.

gustkiller

yes. we will

you rocks!!

gustkiller

please! made that in v5!! we need to reach a milion pps

gustkiller

2 normis - found that when i map every tx and rx ethernet queue (i82576) to processor core (disable automatic sharing) - queue start working, and global-in and global-out also working (multicore enabled)

how did you set tc /rx queue in mikrotik? what command?

gustkiller

与多个v5英特尔网卡和核心是如此吗mewhat stable? we´re about to put 2x 1gbit transit providers (bgp / mpls / ospf) and some simple queues.

gustkiller

we´re now connecting to a mutiple peers ( transit) and IXPs. So the ASN information is very useful to know when or where buy more access to Ixp or transport networks , or who AS is better to do some bidirectional traffic agreements.

gustkiller

that was exectly what i did last week, opened a support ticket about these feature.

gustkiller

this new drivers supports the Intel 82580EB chipset?

gustkiller

Hi,

there's any way to mikrotik "stamp" the AS information in trafficflow ? like cisco running bgp?

Thanks!

gustkiller

there´s anyway to support Broadcom MSI-X ? The BCM5718 provides a PCI Express v2.0-compliant host interface, which can operate at 5GTs at x1 link width or at 2.5GT/s at x2 link width. The PCI Express supports MSI and MSI-X capabilities and Function Level Reset (FLR). The host interface supports a se...

gustkiller

Hi ppl!

什么服务器硬件可以处理1雷竞技官网网站下载 gb网络在一个d out! Only routing (bgp ) and mpls forwarding l(lower cpu usage) ? And 1.000.000 pps agregated?

gustkiller

所有英特尔千兆,最后一个如果我记得呢ctly is have MSI support. 0 device="11:00.1" name="82546GB Gigabit Ethernet Controller (rev: 3)" vendor="Intel Corporation" category="Ethernet controller" vendor-id="0x8086" device-id="0x1079&quo...

gustkiller

strange, here i have about 270 simple queues and no reboot yet ( x86) and intel nics It's only for 5B4. Believe me :( still strange... b4 here too.. [admin@mk_border] /queue simple> print count-only 272 [admin@mk_border] /system resource> pri uptime: 1w6d10h21m49s version: "5.0beta4" free...

gustkiller

strange, here i have about 270 simple queues and no reboot yet ( x86) and intel nics

gustkiller

Working great, no more RX drops with the new irq balancer!

gustkiller

Hp smartarray 200i

gustkiller

cciss and hpsa for HP SmartArray please!

gustkiller

thanks!!

any problem with the 450G version?

i have some rb150 that's been working for years.. with out problems..

gustkiller

Hi, the last two months i had 5 rb450 with the same problem. It stops to work , and them the eth4 and eth5 leds turns on a very weak light. All these RB450 had been working for about 8 to 10 months.. :( when opened, i found ttwo capacitors leaked and blowed ( su'scom 560uf 6.3 volts..) I just bought...

gustkiller

hi,

i'm just trying to figure out a script that removes all files with the same extension (*.backup, *.rsc) . but nothing worked yet..

file rem [/file find name=("*".backup")]; but it doesnt work..

anyone can do what can i do?

gustkiller

Any kind of router only will take care about dscp / priority flags , if the network administrator , make the rules for what the router will do when marked packets arrives. So in router OS you should tell him what to do with these kind of packets. IE: , if a packet with the dscp 46 arrives and there ...

gustkiller

Can mikrotik add support for that Network Card?

http://www.invea-tech.com/products/nific

gustkiller

hm.. i think i had missunderstood. the twitter message was. " # Become a MikroTik Facebook fan, LIKE this post, and Win a RouterOS L6 license! http://bit.ly/102pcz4:05 AM Oct 19th from Facebook " So that same day i become an active facebook mikrotik fan :D like others 156 peoples that had ...

gustkiller

wait until friday!

tuesday

gustkiller

agreed!

Hardware based routing and forwarding will kick cisco gear ass!!!

gustkiller

and about the new facebook l6 giveway?

just added became a mikrotik facebook fan

gustkiller

the most important thing would be some asics for do the routing via hardware!

gustkiller

thanks, and blame on me rsrs

didn't looked at the firewall filters the default configuration addded.

gustkiller

Hi, just bought a couple rb450g , reset all configurations and only its only accessible when i put the eth1 in a bridge... for example, winbox , telnet, web, mikrotik discovery protocol, nothing works in the first eth port on the rb450G. All the services works in the other four ports.. is this a com...

gustkiller

about the 1 and 2 i have no idea

Search found 418 matches