-w60g - improved stability after multiple disconnections; no... no stability ... i tested on 3 links ... many disconnects every day ... randomly, after disconect trafic not bridged ...
After update some AP's i have cpu load 100% .... (Omnitik) Disable wlan not solve problem.... Reset config ang manual set all settings not solve problem... Latest 42rc have some bug... but disable SNMP solve problem ...!!?? Ping to affected router 100-1000ms, and router randomly rebooted, reboot rea...
it's true ... Mikrotik is best for home users... For ISP - MR have many-many bugs ... not for stable service ... no nic drivers\BGP memory leak\bug in fast-track in last version\ospf not working corectly\no igmp-snooping ... many many problems...
Mikrotik BGP has a memory leak... I have this on my ccr1016 and CHR ... Then 1-2 peer with full table are reconnect, used memory increased by 300-400mb and Mikrotik doesn't reply on winbox and SSH only mac-telnet work... In this case one core is at 100% load and there are random troubles with routin...
board-name: CCR1016-12S-1S +更小ion: 6.34.3 (stable) If i change vlan master interface, vlan stop working! After reboot, vlan working on new master interface correct. When vlan stop work, vlan have RX but no TX traffic, enable\disable vlan or master interface or ip on vlan, do not have any result. W...
Why cannot do? 我n spec this card support jumbo and i see in winbox that supported l2mtu 9000!! 我think that ros intel driver is very unstable ! Second card have many packet loss when load >20-40mbps, pps> 3000... 我ntel is very popular card, Mt, upgrade please intel driver!!!
ROS 6.33.5 if i change on intel eth mtu=1550, packet that have size > 1500 not work! (on other side i have RB951, mtu=1550 too..) link on 951<>951 thith same mtu work great... 951<>intel x86 mtu > 1500 not work then MTx86 have normal intel driver? problem not only in mtu... if the connection is lost...
我have a x86 router with 4eth and 4BGP peers Full view uplinks, now it work on vmware esxi and have uptime > 60days without problem. On last week i instal clean system 6.32.2 on x86 (supermicro X9SCM-F, cel-G540, 2Gb ECC, sata DOM 128gb, 4Eth intel(2onboard+2pci-e)) and export config through export ...
我f i use all SFP+ with 10G modules, ports dead(no-link,rx-loss,no SFP info) at randomly time(10-90 min). after disable\enable dead port via winbox, port work fine again at 10-90min and dead again.. before when the first port module was 1 gig and the second on 10g, all worked fine for a long time. Mo...
v6.10 SSTP tunels work very unstable, go back to 6.7... many tunels connect\disconnect every 1-10min, but any tunels uptime is few days ... on v6.7 same tunel work more stable... Platform - RB1000 powerpc and i have problem before update: any routers then fist boot before update 6.6>6.9(6.10) have u...
i'm testing 6.2 on x86 esxi 5.1 virtual machine... 3 nic - intel 1000e max uptime 2-3days problem - network randomly shutdown... system normal respond on console, and all network interfaces can see in /interfaces print and all link is up 6.1 have same problem too... any ideas?
1)random etherenet e1000e freeze at a random time (no tx) (1-20hour) 2)reboot now work, if i reboot router(console,windox) router go to shutdown... not rebooted...
For a long time TheDude worked perfectly. This morning, the server was not running. Attempts to start leads to crash. What to do? help! windows restart not fix problem. win2003 server x86 dude v4 b3 Debug info: 4.0beta3 ACCESS VIOLATION at: 607912 eip=607912 eflags=10206 edi=0 esi=1d2f7c4 ebp=1d2f69...
5.11 is very unstable in my configuration... 3-4 reboots at day i install v5.8 to other new hardware (intel i3 s1155), 2 nics - Realtek 8111 Gigabit adapter... and have a problem with this nics... at random time nics stop working and tx drop packets are very big increasing... only reboot fix problem...
我have same problem with reboot and stop working... ros 5.11 x86, mpls, pptp server, dhcp server, ospf, vlans, wireless system- Asus p5gc, dual core 2,7ghz, 512ram, cf1gb>sata problem started at version 5.9 My other system have problem too ... ros 5.11 on vmware esxi, 1cpu pptp server... v5.8 workin...
i install ros 5.11 on my new x86 router. After installing finished and reboot system, i have a message on screen - loading system with initrd and blinkink cursor on next line I waited 10 minutes but the system did't boot. after any restarts i have this problem too. reinstalling did not solve the pro...