MikroTik - Search

meshnet

Just FYI,
Brand new one we just turned up.. Same issues as all 4 before it.. Watchdog reboots..
CG-NAT/firewall/10+gb traffic = reboot..
Sent a supout.. probably get the same answer as everyone else..

R

meshnet

Starting to see this issue also on 4011s. 6.44.1 on the last one it happened to.
动力循环恢复所有功能. .
SNMP polling becomes very intermittent right before this happens, pointing to the CPU issues..
Only bridge configured on the devices is an empty bridge for loopback.

meshnet

They are usually for 90 degree risers in their rackmount cases that have 1-2 PCIE slots on them.

meshnet

No X86 packages yet?
The requested URL /routeros/6.41.3/routeros-x86-6.41.3.npk was not found on this server.

meshnet

I had no more time to test, and the unit is already put it into production.

Richard

meshnet

No, I have not. We were testing multi-gigabit interfaces, and I was not ready to spend for the CHR license that supports over 1gb, and I might not use.

I ended up running different software on it, and it can really push the traffic.

Richard

meshnet

I have one of the supermicro Atom version of this unit.. http://www.supermicro.com/products/system/1U/5018/SYS-5018A-FTN4.cfm Mikrotik doesn't see the i354 ( the onboard nics ) I have a dual 10gb card in it, and that works, but the onboard nics don't. Had to load it with netinstall, with a intel NIC...

meshnet

We are seeing the exact same thing, with the AF24/CCR
but also with some older Trango licensed gear, and the CCR.

It's not exclusive to the AF24, is what I'm trying to say.. The CCR is the common denominator.

Richard

meshnet

5.25 is not that old.

I have IPSEC tunnels on this router, also..
So, when I upgrade to 6.1, and it kills my IPSEC tunnels, that is a fix?

Thanks,
Richard

meshnet

I recieved the typical "Upgrade to the latest 6.x version, and test it" from support...

Great..

Richard

meshnet

And what is interesting is that it looks like the results from the 5.25 router are skipping every other route entry that should be in the snmpwalk. It prints one, then skips one, prints one, skips one.. If I try to query the oid directly ( that should be there, and is on the other router ), I get &q...

meshnet

I know this is an old post, but was there ever a working solution to this bug? From a 5.25 router, I can only read about 320 routes from snmp. From a 4.17 router, connected by ethernet to the same router, I can get all 632 routes from snmp. Both show the same routes in winbox under /ip route... Than...

meshnet

We are replacing these almost 10-20 a week these days.. Texas heat,
bad caps don't mix.. really costs me a lot of money. We just go ahead
and refurb them with all new caps (3-4 or so on the 411 )

Richard

meshnet

Try setting a network range in the addresses for the community.
We had a similar problem with cacti, until I figured out you had to put something in the addresses option.

Richard

meshnet

I don't believe it has, unless it is fixed in the 5.x codebase. I spent an hour or so trying to figure out the exact conditions, and finally gave up. Static WDS interface, with nbma, and separate subnets work fine, for me. I'm glad it's just not me ;) I was about to do some routing changes, until I ...

meshnet

Hate to have to post here, but the cap issue is far greater then they are letting on.. On my desk, I have over 20 411's 2 411ah's, and my techs have at least another 4-5 each in their trucks.. This is costing me a fortune in board swaps, and truck rolls.. And I know we have already thrown away a bun...

meshnet

One of our tower cores.. Luckily has generator onsite.

meshnet

Were these at any kind of distance?
Tested indoors, outdoors?

Thanks,
Richard

meshnet

Most of of the ports on the 2 boards we threw away were plugged into other routers, and routerboards.. RB600's ( gigabit ) , RB1000's, supermicro onboard gigabit, or Cisco 2950 Switches. 100 or 1000 speeds, didn't matter... they drop off anyway.. I'm glad you are having luck.. don't expect it to las...

meshnet

LOL.. You want to know their official "Answer"... Here it is! Hello, We have some mixed replies from customers, some of them was able to correct issues by upgrading BIOS of the motherboard, some other was not able to correct it at all. So I can only suggest to play around with BIOS version...

meshnet

Lol..

This makes 3 threads now, about these cards..
Search for 44GV..
Come on mikrotik.. give us something..

Richard

meshnet

Notice the silence....

I love all the other products, but they really should pull this card..
It would be different if we got support for it, but they don't seem
interested in that.

Richard

meshnet

No, several of us have had problems.. Ports just drop off, and you have to disable/enable them to make them work. I sent a supout, they created a ticket, and never heard anything.. My boxes are standard intel motherboards, etc.. Never had an issue with anything else, but these.. We yanked them, and ...

meshnet

Just to clarify.. ALL other cards work great in these systems. Supermicro P4 Motherboards I have dlink dfe-570tx. - working great. Matrox 4 port Intel chipset - working great RB44 - working great.. I replaced two of these cards with the RB44GV to get gigabit capability.. The ports just drop off... y...

meshnet

I have... I did that before I complained. I have sent supout, hardware config, and you guys sent back "can you put a queue in to see how much traffic is going thru it? " I had to respond "no"... It's a core router... I can't keep enabling/disabling the ports to keep them working....

meshnet

Normis, You have seen several threads on the forums for these cards. I have tried it in two different supermicro intel based boards. Other cards work perfect, and these don't. They drop ports. I have heard this from several different people now, including my vendor. I have dlink dfe-570tx, older mat...

meshnet

I had to pull them.. I can't be called on to do QA for Mikrotik for these cards..
They have a problem, Mikrotik knows it, and they are still selling it..

Buyer beware I guess..

R

meshnet

I have another case of bad RB44GV..

This one has ports that just stop transmitting.. I disable, and enable the port,
and it starts working again for about 12 hours...

RBV44GV 3.20....

meshnet

Sent supout, and screenshot of resources/pci

Richard

meshnet

The new e1000 doesn't support it ( I've tried 3.14 )

Kernel 2.6.26.5 has it included. is is the igb option.

Hopefully they'll enable it, so I can get an added 2 gig-e's!

Richard

meshnet

Could you guys please add the Intel igb driver to the kernel?

http://downloadcenter.intel.com/detail_ ... ldID=13663

A lot of server boards now are coming with the 82575/6 nics..

Richard

meshnet

http://support.microsoft.com/kb/928233

R

meshnet

Cool

I would be interested in the SmallSMTPServer. I'm having to deal with allowing SMTP
AUTH through, so I've been attempting to just block limit overages right now.

What is it written in? I'd be interested in extending it to proxy SMTP AUTH connections,
on top of the greylist..

Richard

meshnet

Sam,

Can you post how you do your greylisting on the MT?

Thanks,
Richard

meshnet

Now that the MT guys are back from MUM, can I get a ruling on this?

Richard

meshnet

Hrm..

[admin@xxxxxx] routing ospf> /routing ospf status lsa print external
no such command or directory (status)

V2.9.40 on a 532 routing-test enabled

I do want to filter external routes... in-between areas.

Richard

meshnet

Ping..

Anything from Mikrotik on this?
3.0x maybe?

Thanks,
Richard

meshnet

我发誓这是我们正在做的。. http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a00800b5d4f.html Feature Overview The OSPF ABR Type 3 LSA Filtering feature extends the ability of an ABR that is running the OSPF protocol to filter type 3 link-stat...

meshnet

Here is what I'm seeing, and tell me if it is what the filter is supposed to be doing... When I put in the filters, they seem to apply to what routes that particular router generates only. Example, I have a MT as a ABR between to areas, I only want to propagate some routes between the borders. If I ...

meshnet

I know it is routing-test, but has anyone made the ospf-out filter work?

I have read about 6 different threads in the forums, and they all go
silent after this determination.

Has anyone tested ospf filters in 3.0bx? Do they work there?

Thanks,
Richard

meshnet

A Linux Daemon would be awesome..

All of our monitoring programs/ stats, etc all run on a couple of
mirrored linux boxes. If we could run dude on them , that would
be the stuff...

Richard

meshnet

While you are making changes to winbox...

Could we get a option to make folders/groups for routers...
SecureCRT SSH went to this on their connect screen , and it is awesome.
I have routers/servers by groups, and you can expand/collapse them, etc.

Just an idea..

Richard

meshnet

phill, a couple of fixes for the next version,

the fetch.php scripts don't use the rrdtool configuration entry, they are hard coded.

also, you might add a config var for the snmp community.

Thanks,
Richard

meshnet

This is exactly what we do. We have bunches of these out there. The latest ones we build use SC512L ( the rear-facing ) P8SCI ( motherboard with dual gig ( broadcom chip ) ) snk-p0011 ( heat sink ) cse-pt66 ( air duct ) cse-rr1u-x ( riser card ) NOTE!! this motherboard is 3.3V pci only! rb-44 ( we h...

meshnet

Hey, I'll be there too..

I would be fun to throw one in the CTF network, and
see if it gets taken down..

Richard

meshnet

Does 2.9.16 fix the 64mb NAND problem?

I have a few older ones that I've been waiting to upgrade.

Thanks,
Richard

meshnet

Curious how are you sending a radius command from php?
php_radius?

meshnet

Is it available?

How much cheaper is the 111 going to be? That would be
perfect for the cpe.. only need 1 mini-pci.

meshnet

Yes.

It will associate, but not pass traffic.

Richard

meshnet

http://www.wisp-router.com

Richard

meshnet

Just telling you what I see... matter of fact this morning,
in order to get a new client associated, I had to cycle the radio card.

RB532AP with a prism 200mw.. 2.9 release not RC

R

meshnet

We are also seeing the same thing. If we disable the wireless card, and then re-enable it, it is good for a couple of days. I am going to try swaping the prism for a cm9, and see what I get. Not a signal issue, this is a small neighborhood with less than 15 clients, and most of them with -66 - -70 s...

meshnet

OK, what am I missing here? MT 2.9RC6 Dlinkg G530 card running as an AP. We don't usually use WEP, but I was replacing an old AP with at MT box. I setup a security profile "ciscowep" , added the keys, and set the card to use it as the security profile. Works great.. Every time I reboot the...

meshnet

Every time we have replaced a cisco solution with something else ( usually Mikrotik ) we have had a yank the whole thing... The Bridge/AP will work with other brand clients, but none of the clients ( wgb/br/ap ) work with anything else . Now, the pci cards , and the laptop cards do work, and we have...

meshnet

Don't get too excited.
Updated, all packages look good, and it sees the card.
Went to enable it, and it kernel panic'd.

Richard

meshnet

We have used a Bridge interface without adding physical interfaces to it.
这似乎很奏效。我们有to source-NAT from some specific
设置ip的供应商联系我们。这个年代eems to work with no issues.

Richard

meshnet

Anything new?

meshnet

Search found 57 matches

Re: CCR1072 watchdog reboot

Re: RB4011 and RB1100 AHx4 "bricks" randomly

Re: Supermicro AOC CGP i2

Re: v6.41.3 [current]

Re: Beast x86 hardware

Re: Beast x86 hardware

Re: Beast x86 hardware

Re: RouterOS v6.x with Ubiquiti AirFiber 24 v2.0 - RX Error

Re: Listing the routing table via SNMP

Re: Listing the routing table via SNMP

Re: Listing the routing table via SNMP

Re: Listing the routing table via SNMP

Re: RB411 Capacitor replacement

Re: SNMP problem with 5.17 - Dude 3.6

Re: OSPF with WDS

Re: Poor quality of the capacitors in RouterBoards

Re: v3.X uptime challenge

Re: 802.11n

Re: RouterBoard 44GV ports randomly stop working

Re: RouterBoard 44GV ports randomly stop working

Re: RouterBoard 44GV ports randomly stop working

Re: Problems with new 44gv ether.

Re: Problems with new 44gv ether.

Re: RB44GV or RB44G

Re: RB44GV or RB44G

Re: RB44GV or RB44G

Re: RB44GV or RB44G

Re: RB44GV or RB44G

Re: Intel igb nic driver

Re: Intel igb nic driver

Intel igb nic driver

Re: URGENT - DHCP & Vista on a LAN

Re: changeip : Greylisting ?

changeip : Greylisting ?

OSPF-out filter not working

AP security profile resetting