去od time of day!
Has anyone used split dns in the config mode? Please give an example.

I try to change cable and poe adapter, no difference - RX - 0! Cable and adapter work fine with another equipment.

I have the same problem with lhgg lte 6

+++
Mikrotik I want RB5011!!! Sell me two: in desktop case with wifi and for 19" with LCD, double power supply, M2 nwe for dude :-)

+++

We changed the provider and the problem went away :-)

++1

+1.

+1 for VTI

+1 for WireGuard

+1.

+ MLAG

Sorry I forgot about certificate: RSA 2048 default, Mikrotik settings.

If you have a Windows softphone already installed, tell it to register at server address port 4500 using UDP, otherwise look for a tool which can send a UDP packet to an arbitraty port and address. On the Tik, use a firewall passthrough rule or /tool sniffer to see whether the packet arrives. I am ...

"Wrong" as in "не родной", i.e. a good one but not relevant for the server, yes. Yes, I use good CA cert. from another router. Now wait a bit... a good connection towards another router successfully connects but you can see only two packets in the dump as well? In that case I'm ...

Ok, if i understand right: 1. I set wrong CA on my connection and run dump: No. Time Source Destination Protocol Length Info 77 9.559994 172.16.250.51 91.221.164.210 ISAKMP 1146 IKE_SA_INIT MID=00 Initiator Request Frame 77: 1146 bytes on wire (9168 bits), 1146 bytes captured (9168 bits) on interfac...

Sindy thank You for quick response! Do you use the same certificate on these Win10 also to connect to the other Mikrotiks? No, I use different certificates signed by these routers and set-vpnconnection to select right CA certificate. Also I try connect by LTE, and ask colleagues to connect, renault ...

I agree with You: "223" look very strange. Dump from WIN10 udp.port==500 No. Time Source Destination Protocol Length Info 2477 7.070058 172.16.250.69 W_IP.W_IP.W_IP.W_IP ISAKMP 666 IKE_SA_INIT MID=00 Initiator Request Frame 2477: 666 bytes on wire (5328 bits), 666 bytes captured (5328 bits...

Hellow! Dear colleagues, please help me debug IPSEC IKE2 connection: WIN10(ISP1,natted)->CRS328-24P-4S+(IPS2,Public IP), this is typical road warrior setup with RSA. My config: # apr/11/2020 17:53:02 by RouterOS 6.46.5 # software id = HS7D-L3T2 # # model = CRS328-24P-4S+ # serial number = A1A10AE98C...