Explain what?

I have already replied to your other post, do not spam same question muiltiple time.
viewtopic.php?t=189397#p963637

You didn't answer his question at all.

Just got my hAP ax2, firsts impressions, the wifi is atually good and fast.

How many watts does it idle at?

at 20v I got a reading of ~4.5w

So that's why there's more holes on the case now, my AC2 idles at 3w.

I have received my hAP AX2

How many watts does it idle at?

You should downgrade to v6, performance is so much better.

For the bridge method, if the router supports # /interface ethernet switch rule add switch=switch1 ports=ether1 mac-protocol=0x888E new-dst-ports=ether2 # /interface ethernet switch rule add switch=switch1 ports=ether2 mac-protocol=0x888E new-dst-ports=ether1 can any of the lines above it be simplif...

New performance test result is so much better now for AX2, thank you Mikrotik!

Hi,

Mikrotik has changed the test results and hAP AX2 is now more powerfull in routing and it is now much better than hAP AC2. Pitty that USB is missing now....

Routing 25 ip filter rules 2625.1 Mbps

Now we are talking! I wonder if this is because of v7.5rc.

Guess I'll just skip the AX2 for now until the performance regression is fixed.

I think in real-world scenarios is very unlikely to saturate a 1gbps ethernet interface with wifi traffic on a small AX access-point like this. Beyond specific benchmarks, under ideal conditions, an access-point like this will be far from pushing 1gbps or considering 1gbps a practical real limitati...

Why is ax2 slower in routing over ac2? ax2 has powerfull CPU...Is it some mistake in test result? tests.jpg RoS 6 uses an ancient Linux kernel that still have route caching. RoS 7 uses a fairly new kernel (5.6.x, if I'm not mistaken), and routing cache was dropped from Linux some time ago. It was d...

Why is the performance worse than ac2 for 64 bytes?

Wifi 6 when?

my ac2 never uses more than 3w with around 40% cpu load.

Yeah TP-Link's Wifi 6 access points are released too and they are a beast.

Oh well, guess I'll just get a Wifi 6 AP instead. Sad.

When will we get Wifi 6?

Is transmit power back for the AC2?

With the inability to lower transmit power with the new versions, looks like it's time to look at other vendors.

How do I lower transmit power without antenna gain?

Where is Wifi 6E?

Anyone know why sometimes when connection dies, replugging in the AT&T router would re-establish connection but only at 500mbit speed? I have to reboot Mikrotik router to get back to 1000mbit

(I'm using the bridge method, I power down the AT&T router after it authenticates)

So is antenna gain added back now?

Thank you guys, it works now! Not sure why the IP address was setup like that though...

/接口ethernet set [ find default-name=ether1 ] mac-address=[snip] /interface wireless set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode antenna-gain=11 band=2ghz-onlyn channel-width=20/40mhz-Ce country="united states" disabled=no distance=indoors installatio...

It's just Windows TCP/IP ipv4

IP to 192.168.1.254 (same as before)
netmask 255.255.255.0 (same as before)
gateway 192.168.1.1 (same as before)

DNS 192.168.1.1 (same as before)

My previous consumer routers would work either way, but this Mikrotik doesn't....

Hi, I bounded a mac address to the same ip in dhcp server and port forwarding works via /ip firewall nat add chain=dstnat dst-port=1234 action=dst-nat protocol=tcp to-address=192.168.1.xxx to-port=1234 But if I change the machine to not use dhcp and hard code the ip (same ip as 192.168.1.xxx) instea...

can't wait

这是有关Mikrotik dhcp-clie的样子雷竞技网站nt ignoring vlan 0, have to setup a bridge to change the vlan to get it to work, but I think this is using extra CPU?

Solution atviewtopic.php?t=104169

Hi, my previous routers all I had to do was change MAC address and they would work. I just got the Hap AC2, changed ip, changed the MAC address, and no internet, dhcp client can't get an address. What am I doing wrong? [admin@MikroTik] > export compact hide-sensitive # jan/02/1970 00:25:56 by Router...