MikroTik - Search

jober

To fix hotspot you have to down grade to latest long term.

jober

Did they fix your issue? Or are you stuck on the older version?

jober

Is the hotspot still broken on anything over 6.44.6?

jober

What was done to solve this issue?

jober

Has anyone started a list of devices the CRS112-8P-4S-IN can power without having issues?
MT, UBNT, Cambium, IgniteNet, Siklu or Mimosa?

jober

Well, no issues today. I will update Tuesday so we get the business customers back on Monday. Although all the hotels that link is servicing I would have thought packet loss and speed issues would have already happened. Oh, there is a lot of VoIP traffic on the link too.
To be continued.

jober

We just installed another LHG60G link that sits about a foot over an existing LHG60G. The top one point up about 15 degrees and the bottom one points down about 20 degrees. So far they don't seem to be hurting each other. Maybe tomorrow when a few hundred megs is flowing we will see an issue or mayb...

jober

Can you'll share your experiences with co locating multiple 60GHz MT radios and what the minimum proximity would be in the same direction or in a back to back mounting on the same pole? I would like to mount four dishes on the same pole in a north, south, east and west setup. They would all be on di...

jober

你好,我有两个800的链接和智慧都是设置hout beam forming disabled . They working perfect even in heavy rain or fog for that distance . We based in Ireland and last two weeks was mental rain and fog and didnt have one disconnection yet . True is from 700mb it dropped down to 500mb but sti...

jober

What is the purpose in the arrow lights on the side of the LHGG-60ad?

jober

Have you looked at grounding of the devices or do you have any inline surge arresters ? I've had my fun with MTK devices and grounding before causing massive link flaps and corresponding fcs/Rx Align Errors. For shits and giggles have you tried to put an intermediary device like a 8 port gigabit sw...

jober

I have an ongoing issue with my CCR1009-7G-1C-1S+, where I get the fcs error on the link to my AF24. I have replaced to cable, connectors, POE and Ethernet patch cables. I also changed from ether1 to ether7. None of this fixed it so I replaced to AF24. The issue is still there and it is killing the ...

jober

We have liked it so far. It is slower to load but not in any other regard.

jober

I'm running 6.41.3 on RB3011 and I can't get mirroring to work. I was wondering if anything changed with the way the bridging and switching works in the new version. Any help would be great. This is a link to simple how to but it is not working. https://www.wirelessinfo.be/mikrotik-port-mirroring/ T...

jober

I just upgraded the 6.41.4 from 4.0 so I could have the Router upgrade button work again but now I have no Winbox button. Do I need to add that to the Router Board Dude directory or something?

jober

Thanks we got it.

jober

I have been running the old windows version of Dude 4.0beta3. I bought the RB1100AH4x Dude edition to move over to the new Dude 6.41.4 but I don't even know if I can import from the old version. Is it possible to import the data from the old 4.0 version?

jober

Why hasn't MT started making it's own VDSL2 SFP Module? I know the g.fast modules are hitting the market so that should only help the case for single pair copper connections.

jober

If down clocking wouldnt the ram be 1200mhz ddr1600

jober

Sorry, I guess I was not clear. Do the 1072's ship with DDR3 1333 or 1600?

jober

Why is there more that one ddr type listed? Are they all 1200Mhz, DDR1600 now? I see the spec sheet speed test shows: Tile 72 Core (1200Mhz, DDR1333) Max possible throughput Tile 72 Core (1200Mhz, DDR1600) Max possible throughput Tile 72 Core (1000Mhz, DDR1333) Max possible throughput Tile 72 Core (...

jober

Does anyone use auto channel selection? If so, How does auto channel work for you?

jober

Why can't I export my wireless setting? I don't get the SSID's.

1. export
2. export compact (this shows the SSID)
3. export verbose (this shows everything)

jober

Complexed script and I need help! I need to configure 250 hAP lite routers and 250 wAP APs so I plan to use flashfig for the job. The hAP and wAP are paired for each condo unit. The config for each unit needs to have a few things different, like Identity, SSID, WPA password, LAN Address and the WAN ...

jober

Can a hAP lite run a CAPman server for one wAP-AC?

jober

This was Versa's reply to my email.
"Hello James,
Currently, we have a pair for verification. We have not try with Mikrotik yet but sounds like a good idea. Should go into production real soon."

jober

Versa is waiting on stock. As soon as I can get one I will.

jober

I love the idea that I can use a RB962UiGS-5HacT2HnT for all my connection types. I have customers we connect to with Cat5 that we can plug right into the MT and if we run fiber we can slide in a SFP fiber module and now we can use the SFP VDSL2 module for customers that only have telephone wires ra...

jober

I'm looking for an Edge router that can handle full routing table. I have been told the CCR line will not give us the performance we need. We are connecting to our upstream providers with two 10Gbps SFP fiber modules. So, I'm asking if anyone here has used the Maxxwave Routermaxx Vengeance or any ot...

jober

Any chance these G.Fast SFP modules are compatible with router boards?

http://www.methode.com/documents/techni ... ev_2p1.pdf

jober

If MT makes a CPE, let's hope they put a SFP+ port on it. It would also be nice to have a high power gigabit POE in and two POE out gigabit ports. We could use the POE for cameras or two more radios for a daisy chain and relay. It looks like the fcc may be opening up another 7GHz of spectrum so the ...

jober

They have 3 types of chip sets. Two of them can operate in CPE or CO mode. I don't think the SFP can do CO mode. Not a deal killer but would be nice if it would do CO mode. I could use a 24 port SFP cage switch and mix and match modules, VDSL2, Fiber and Ethernet. I would use the RB's with SFP ports...

jober

I was just concerned with the full routing table loading on a single 1200MHz cpu versus a 3500MHz x86 cpu. Thanks

jober

We are upgrading our 1Gbps upstream connection to a Level3 10Gbps and Cogent 10Gbps. Should I go with a x86 based ROS router or the CCR1072-1G-8S+? Or should I be looking away from MT. I love MT but I wonder if it can handle the traffic on the edge bgp router or even as the core router with simple q...

jober

We use the VC-231 VDSL2 modems. They can be paired to form a bridge with one side set in CO node. Very nice when you don't need a 8 to 24 port DSLAM.

http://www.planet.com.tw/en/product/pro ... p?id=26560

jober

I was looking for the VDSL2 SFP solution so I could use MT as my condo and apartment solution.

This is the only thing I could find.

http://www.comnet.net/products/SFP/CL-SFP.pdf

jober

CCR1036-12G-4S

jober

几周前,我们有一个路由器的问题所以我partner thought changing the router would fix it. He grabbed the backup CCR off the shelf and plugged it in. We heard a pop and that was it. No boot, no light, no fans. The power supply was gone.
Can I buy a new PSU for it?

jober

Yes fiber is the only thing you should think about with new construction. But there is no way to run fiber in a lot of these old buildings. There is however a lot of copper in these buildings that can handle VDSL2. We can spend a lot less time and money and still give the customers 100mbps up and do...

jober

This one! Me, I'm going to plug it in. I have customers that we service with wifi, ethernet and vdsl2 and soon fiber. This would be great for suppling one device in the customers unit that covers all four media types. Will I actually do... I did just get a quote for 1000 of them. If I can can a grea...

jober

YES it is and here it is. VDSL2 pluggable SFP device.

http://www.comnet.net/comnet-products/a ... l-sfp.html

jober

The Athina uses the same antenna and enclosure but the inside is Athena.

jober

Athena Wireless has the A060mini 1000mbps FDD link in the 60GHz band. $5,995.00 (I use them.) Siklu has the EH-1200FX 1000mbps FDD link in the 80GHz band. $6,080.00 (I have the $3,500.00 EH-1200LT on order. Only 700mbps TDD so 350x350 or 500x200). Siklu has a new 60GHz link ((Coming soon))but I don'...

jober

I thought these would have been good vlan switches and NAT gateway router. I'm afraid I would have been better off with a managed D-Link switch

and a 951G.

jober

Thanks for the help.

Turn out that the rb2011 has an issue where anything on the gigabit ports is limited to a little over 20 Mbps on any gig port other than the wan port.

jober

I am looking for the best router for hotspot service. The customer has a 200Mbps FDX internet connection. I installed a RB2011 but running the hotspot server on it seems to cut the speeds down much to low.
Will a CCR work any better?

jober

Will this work as a simple routing and NAT solution so each customer has public IP address? From upstream router, route all the IP address as /32 to the condo's routers current public address. On Condo router add below. /ip address add address=x.x.80.69/32 interface=wan /ip firewall nat add chain=ds...

jober

Ubnt dish is great. But you can't always use a dish of that size. Thats why I had to use the powerbridge in the past, but now that the price is a little better on these tiny dishes I can use them.

jober

Yes I use it with rockets, great antennas. Much better than powerbridge.

Thanks for the reply. And thanks for an answer that's not a question.

jober

What is distance? What routerboard and what ROS version? Do you use NV2 or Nstream?
What type and long pigtails?

RocketM5, AirOS 5.5.3, 4" pigtails

jober

Thanks for the info siscom.

I'm only using MT for the routers in my network. I have been using ubnt for the wireless side. I'm hoping to here good things from MT users about their PTMP mimo networks before I think about switching back to MT wireless.

jober

How many here are using these antennas?
"Jirous JRC-24 EXTREME MIMO 24dBi 5GHz Dual Polarity Parabolic Antenna"
I just installed two as a replacement for the powerbridgem5 and they did improve the connection.

jober

How do I change the main panel when Dude starts? It was coming up on the right Map but now it always comes up with the device screen.

jober

I have around 30 bad RB411 boards. Some have bad Capacitors so I changed them out with 680 6.3v caps. The replaced caps were 560 6.3v.
Will this cause any damage or odd problems with the boards I have repaired with the 680 caps?

jober

what about Groove 2.4 GHz ? I recall hearing something about this somewhere but cannot find any solid references....

The groove is a single change radio. (one antenna)

jober

Old thread but maybe you guys could help me understand why my customers can't get good speeds through the sonicwalls. One of our customers has the TZ 210 at 5 locations. we upgraded them to 1000Mbps and 100Mbps Full Duplex links at these locations. The MT's can get the speeds to them but not through...

jober

For the most part I would say it's the nice case with two built in antennas that attracts me. Something you can pull out of the box, configure and install.
No more metal case, board, radio card, pig tail and antennas to assemble.

jober

I think 6 to 9dbi antennas would be fine for me and a lot of others.
6 to 12 inches isn't that tall.
For outdoor use most people are using sectors. So I bet most of us would be using them indoors.

jober

I want a 2.4GHz OmniTik as well.

jober

Also I am interested, how legacy boards line up here. - RB112 RB113c RB133 (mipsle) - RB333 & RB600 (ppc) I'm amazed that you still have rb112's that work. The rb333 was a good board for us but the rb112 and the newer 411's are quickly making it to the BAD BOARD BOX. We were exclusively using t...

jober

http://routerboard.com/pdf/RouterBOARD_ ... arison.pdf
Where's the RB1200 in this comparison?

jober

How does UBNT's AirControl have built in maps?

jober

2nd that.
But having the dude with gmap built in would be much better.

"yes, that's a plan for a major new version of the dude."

Any time frame on the new dude build that will have gmap.

jober

I have seen a slow load time on any networks with maps in the background and they aren't that big. So I think the big map may indeed crash the DUDE.

jober

We have 3 internet connection, a 100FDX, 20FDX and a 1000FDX. At the moment they are all connected to a PowerRouter732 which runs BGP and then that connects to a RB1000 that does local routing (OSPF) and VLANs. The RB1000 connects to a 10/100 switch that needs to be upgrades to a gigabit switch. Ok,...

jober

Why not make the shield round like a tube?
Could you cut down the beam width with the right shielding?

jober

Thanks for the howto but it's not going to work with the size map I need. The program seems to crash or run out of memory if I go over 4000 x 4000. The area I need is about 25 x 15 kilometer in size and I need the max zoom that google earth offers. Is there anyone that can do this as a service? I'm ...

jober

I was looking for an easy way to add a large map to the dude. Our city map would really be two cities and I want it to be really big. I have started tiling pics from Google Earth and putting them together in paint but it's a pain in the ass. Does anyone have an easier way to do this or even a paid s...

jober

What would be wrong with setting the admin-mac to the same mac that the ether1 port has? Well, I guess I may not be seeing the big picture with the pppoe setup. But I do this with bridged AP's but I use the wireless interface mac for the bridge's admin-mac. I'll have to try using the ethernet ports ...

jober

I just tried to upgrade and RB600 that had 3.0rc10 on it. It never came back. I have 4 more of these boards and as I pull each one from the bags and plug them in they all have the same version.
Is there a bug with upgrading 3.0rc10 to v3.30?

jober

I just tried the RB/GPOE on a RB/600. The board powers up and the switch port shows a gigabit link but I don't get any data though the port. Why? How does this device work? Is there a diagram I can look at or some kind of documentation on it? Are there units it works with and units it does not? Do I...

jober

Not sure if you got it setup but this may help you or anyone else looking to set it up.
Do your own search and you will find a lot of useful video tutorials.

http://www.youtube.com/watch?v=qVaI3f9CtfY

http://www.youtube.com/watch?v=rBDJ24VQ ... re=related

jober

"I tried this one" means it did not work. MT did not see it.

jober

Can anyone point me to a good compatible PCIe x1 gigabit ethernet card?
I tried this one> Intel EXPI9301CTBLK 10/ 100/ 1000Mbps PCI-Express Network Adapter 1 x RJ45
I'm running RouterOSv4.17

jober

What mother board are you using?

jober

What model ethernet and mother boards are you guys using?

jober

我们需要使用太多年的热点,作为years have passed our clients per hotspot gateway have grown along with the traffic and speeds. We started using the RB750G and RB450G but we have found they can't handle the speed and traffic flow we are seeing. It seems they cut the bandwidth in h...

jober

I did an export and it's 500MB. WHY!
The wiki said it would be large at 1MB. So whats the deal?

jober

router AP station HSgateway AP rb750g=======RocketM5------------NanoM5=====rb750g===switch===rb411u--------------Laptop

Search found 690 matches