MikroTik - Search

faxxe

After flawless 72 days online on 7.6 i upgraded our CCR1009-7G-1C-1S+...... no fire or smoke. Resumed the old track to full satisfaction

-faxxe

faxxe

我收到相同的地址。167.114.50.149乐趣。Same packets arrived here to my CCR1009. Thanks god it was filtered in a raw rule but i got an log entry: Not TCP protocol prerouting: in:ether1 out:(unknown 0), connection-state:invalid src-mac 00:01:5c:b5:dc:46, proto 132, 167.114.50.149->xxx.xxx....

faxxe

Hello I recently started using ROS v7.2.1 in a virtual machine on my Synology. Works very well and I bought a license. Now my question: if I now change the hardware of the virtual machine will I lose my license? What does the installation ID refer to? To the MAC of the network cards? Are the number ...

faxxe

Thanks for your opinion. It has motivated me to update

-faxxe

faxxe

Hello
I have installed on my CCR1009 in a 2nd partition ROS 7.2. On the first partition I still have v6.48.6 on it.

Should I now also update the firmware for 7.2?

Could I then still roll back to 6.48.6?

Am unsure about the firmware.

Thank you,
-faxxe

faxxe

I think, its a known issue of this CCR router.
Same here, few spikes from time to time.
I dont care about that ;)

-faxxe

faxxe

Rock solid on CCR1009 ... i like that build ...

https://faxxe.dyndns.org/ccr.jpeg

-faxxe

faxxe

I use this tool and it works flawless with Big Sur

https://github.com/nrlquaker/winbox-mac

-faxxe

faxxe

6.46.7 was a very stable version. Installed immediately after release and ran without problems or reboot.
Hopefully 6.46.8 is similarly stable.
Installation already without problems on the CCR1009

-faxxe

faxxe

It could also be the case that your firewall settings don't allow to download directly from the router. Test this with this in Terminal: /tool fetch url=http://feeds.dshield.org/block.txt as-value output=user If you get: failure: connection timeout then your firewall is blocking. Sir, you are entit...

faxxe

Update: I see that all omit this "/" and this works if you are already in the root of the menus. I always put a "/" in front to be sure I land where I need, every time, where ever I am. Thank you, i add the "/" to the first line but with the same result. All lists cant...

faxxe

Please post the scipt you use then can have a look at it. ip firewall address-list :local update do={ :do { :local data ([:tool fetch url=$url output=user as-value]->"data") :local array [find dynamic list=blacklist] :foreach value in=$array do={:set array (array,[get $value address])} :w...

faxxe

Do you have by any chance spaces or special characters in the names of the lists?

In which lists? I have to define them before running the scripts? :/ Maybe i use it wrong ...

-faxxe

faxxe

Hi
i tryed the different scripts but get on all lists "Address list update failed"
CCR1009 v6.46.7

What could be wrong?

-faxxe

faxxe

Hello, is there an insider tip which is the most stable version for a CCR1009? Especially the current 6.47.x versions are, at least here, not very stable. Mostly after 20 - 30 days the router needed a restart. Since I don't need any of the latest features and only have a simple setup I could use a s...

faxxe

Today after 20d uptime on my CCR1009 suddently the internet was down. I could login in the CCR1009 and even the WAN port seems online and had a IP from the provider.
I had to reboot the CCR and the problem was solved. This happens first time with this build

-faxxe

faxxe

Even if they don't believe it yet, it will take revenge

-faxxe

faxxe

I had a CRS125 on a 250/50 internet line and the CRS125 was not able to fully utilize this line in the download.
Max capacity was about 180-190 MBit with short spikes to 230. Finally i replaced it by a "real" router from MT

-faxxe

faxxe

Update from 6.47 (38d uptime) to 6.47.1 on CCR1009-7G-1C-1S+ was flawless

-faxxe

faxxe

Damn it. These things must have some sort of systematic malfunction

-faxxe

faxxe

So, if you want to upgrade, do a full config export before and only do it if you have time for reconfig and another remote access.

Did the update to 6.47 on the same router 28 days ago and had no problem.
My CCR1009-7G-1C-1S+ is still up without any fault (current uptime 28d 23:34:00)

-faxxe

faxxe

Same here: CCR1009-7G-1C-1S+
One week done by Observium

-faxxe

faxxe

I have 3 services running on an internal server (192.168.1.254) which are also available from WAN. The port numbers are 443, 8051 and 8888 I can reach them from my LAN with that link (example): http://:8888 These are the Hairpin NAt entrys: /ip firewall nat add action=masquerade chain=src...

faxxe

I´ll keep the fingers crossed that your issue is solved.
BTW I ended up with a CCR1009. Overkill but nice to have

-faxxe

faxxe

Damn, whats going on here?
95000 in 24hours.
whats the best way to go back?

-faxxe

faxxe

Hello, i use this router in a small office installation. LT 6.45.9 In the 1S+port a Mikrotik S-RJ01 is installed to get a further 1G port. On this port i get the public ip from a Unitymedia ConnectBox, which is in gateway mode. Every day several times i find such entries in the log: sfp-sfpplus1 lin...

faxxe

One more if you need a Catalina beta tester

-faxxe

faxxe

export compact

Sent from my SM-A705FN using Tapatalk

I dont have the device anymore. Was defective and the reseller keep it in his shop.

Maybe Mikrotik can "convert" my backup file?

-faxxe

faxxe

Hello, my RB1100AHx4 was defective and i got a refund from the reseller. I have a backfile from my setting but no clear export from all my settings. Over time my setting get more complexive and i also had some scripts. Is it possible to import this backup file directly on a Mikrotik CCR1016-12G rout...

faxxe

Final update:

The rerseller picked up the router and i got a full refund.
Seems my router had a serious issue.
Anyway ... problem solved but what buy next ?

-faxxe

faxxe

It was just an attempt to contact the reseller. Since one week no response from this company.
It seems i have to live with that issue and i´ll kick out that unit on the next good opportunity.

Learned my lesson where to buy and where not

Anyway....
-faxxe

faxxe

Yes, i was now in contact with Mikrotik Support.
Fast reply and just one hint from them: hardware failure -> Repair or replacement if its under warranty.
Now i´m in contact with the reseller.

-faxxe

faxxe

My router is also connected to an UPS.
One PS to the AC line and the second to the UPS.
I got the same log message as user jebz:
"system,error,critical router was rebooted without proper shutdown"

-faxxe

faxxe

I have seen this thread, but there it seems to be the problem that the router is blocking or bricked.
Mine's just rebooting.
But ok, could be the same problem......

-faxxe

faxxe

Dear all, now i use this unit since about 24 month in a small private LAN. 3 PC and some IoT devices and few mobile phones on a cAP ac. But the uptime from this RB1100AHx4 was never more then 40 days. This was the maximum. Normally it reboots automatic every 20 - 40 days. Very random and unpredictab...

faxxe

RB1100AH4x 6.45.7

nothing special in my configuration. just few firewall rules.

"Router was rebooted after proper shutdown"
Happens now 2 times after 7 and 21 days of running

Really long uptimes i only got with the 6.44.xx

-faxxe

faxxe

Since a long time i use a script to get my public ip and a log entry if it has changed. I found it here in the forum. It creates also an entry in the adress lists with my public ip named "external-ip" Since the upgrade to 6.45.1 this script doesnt work anymore. No error message but also no...

faxxe

在奥地利格拉茨你好我用1100 ahx4 3month. But since the last "stable 6.44.1" update it happens 2 times that it cant write to the internal disc anymore. In that case if i use the "File" function i cant see any files on the internal disc. It shows the correct remain...

faxxe

Hello from Graz, Austria maybe i missunderstood this information "interface list" - "ethernet" - "last link down time" and "last link up time" but on my RB1100AHx4 v6.43.8 i have here date which are in the future? Any ideas why? I took the screen shot today, 0...

faxxe

Thanks anav, problem solved with hairpin nat

Regards,
faxxe

faxxe

Hello from Austria..... This is my first entry here but with a read a ot and so far my system works well. 1100ahx4 My question is: i have a domain as example : www.xyz.com With my mobile phone i can connect to my webcam by: wwww.xyz.com:1234 To have this there is a dst-NAT rule in my router with dst...

Search found 41 matches