CCR2116: L3HW NAT is fixed with 7.6beta6 (broke with 7.5)
CPU switch rules are still broken though.

I confirmed this on my 2115 as well. L3HW switching was enabled on the switch and NAT worked prior to 7.5. After upgrade NAT was broken until I disabled L3HW switching on the switch. Before 7.5, FastTrack NAT connections could be reported as hw-offloaded despite still getting processed by the CPU. ...

*) sfp - improved stability when using 2.5G optical modules in CCR2116, CCR2216 and CRS518; CCR2116 Link now comes up at 2.5Gbps, so it doesn't crash the switch chip anymore, but I still get psu/health fail and fans spin up/down non stop until I reboot it. How many time the router run until psu fai...

*) sfp - improved stability when using 2.5G optical modules in CCR2116, CCR2216 and CRS518;

CCR2116
Link now comes up at 2.5Gbps, so it doesn't crash the switch chip anymore, but I still get psu/health fail and fans spin up/down non stop until I reboot it.

Did you try using another subnet and it doesn't work?

It didn't work the first time because of a bug with veth interfaces: updating IPs has no effect, interface must be re-created.

For containers, can we use another subnet than 172.17.0.0/16 or is this hardcoded for now?
This is the default docker subnet so it conflicts with machines already running docker which have this route locally.

Installed on CCR2116
2.5Gbps mode still crashes the switch chip
Switch rules from cpu port still not working

CCR2116 with ISP SFP ALCATELLUCENT firmware V7.37beta. Got PSU 1 & 2 fail after some's day's. The fan go up and down and the healt status was wrong. Look like the SFP was not supported and cause this issue. I already tested with all v7 release, beta and stable. The longuor working release was t...

I've now deployed a half-dozen 2116's across my network, one of which replaced my busiest 2004. They can be found for just under US$800. They're essentially a CCR3XX switch with a 40Gbps connection to the CPUs, and so far I'm impressed with their performance. Thanks for pointing out the CCR2116. Wh...

Tested on CCR2116: unstable after 3 hours, looses health info and fans spin up/down non stop.
Setting an interface to 2.5Gbps completely crashes the switch part (with 7.2 as well)

在2.5 gbps似乎同步好了a CRS317. (GPON ONU from FS.com)
However since switch rules are broken and bridge filters are ignored, I can't make it work.

Switch rules for cpu port are still completely broken on a CRS317.
相同的规则在另一个测试设备工作fine.

Wanted to try sr-iov on chr but sadly the bnx2x drivers I need have not been included so it won't work.

SFPs won't work on a CRS317 with 7.2rc1, flapping all the time and no connection. Using Cisco 10G-SR on both ends. Works fine on 7.1.1 Also noticed that with mellanox, finsair and blade 10GB sfp+. I'm rebuilding my home network with a RB5009 at the "core". Funny enough, I had to downgrade...

+1
It's not a hardware limitation on current line of devices (CCR2*** routers, CRS*** switches) as both can support HSGMII according to cpu datasheets.

This would make these devices the easiest replacement for European ISP routers.

SFPs won't work on a CRS317 with 7.2rc1, flapping all the time and no connection.
Using Cisco 10G-SR on both ends.

Works fine on 7.1.1

Upgrading the firmware did not help.

The only question which comes to my mind is whether your firmware is aligned with the RouterOS version (in /system routerboard print , check whether current-firmware and upgrade-firmware are the same). On my machine running 6.42 (but I admit it is a hAP ac lite, not hAP ac²), setting hash-algorithm...

Hi, I'm facing a weird problem, with both 6.42 and 6.43rc on my Hap ac2. Whenever I choose anything else than sha1 for my ipsec peer proposal, the ipsec client just keeps "crashing" and packets never reach the server https://s33.postimg.cc/c8y8l6df3/ipsec.png Another problem, when switchin...