Does the problem with sectors writes solved?

The problem is not fully resolved.
In versions <6.46 there were about 120 sectors per day, now it is about 1000.

5 GHz-only国防部els (LHG5 etc) it works OK.

I think the problem is in arm chips.
LHG5 uses MIPS architecture.
Now (and possibly always) ROS does not have support for some wireless configurations.

Davis , Yes, I'm using IPSec in an L2TP tunnel on my router. After removing the NTP packet, the reboots stopped for 2 days. Then I installed this package again, turned off watchdog, and after 38 hours the router crashed without showing any signs of life. Now I have enabled watchdog and removed the ...

Who reboots - do you have an ntp package and does your ntp server work?

Removing this package solved the problem. Thanks.

Developers, pay attention toproblems with ntp package on armprocessors.

Same problem on hAp AC². Random reboots in 6.45.8 [long term] and ≥ 6.46 [stable].
Prior to these versions there was no problems.

But on a single hAP ac^2 after reboot the interface list was empty.

Disable /tool graphing, and use 6.43.8.

Symbol: ` in WLAN SSID brake all wlan interfaces.
Or even not a symbol, but a virtual WLAN. When I create a virtual WLAN and reboot hap ac^2, I don't see all interfaces and export doesn't work in the console.

Same problem in 6.43.4, hAP ac^2

I can not reproduce this issue on my hAP ac^2 with ROS 6.43 (both CLI and WinBox).

I don't know what the problem is. At me this problem is shown every time, even on a default config.

Changing the identity on hAp ac² crashes the router with an error: "kernel failure in previous boot". You mean changing identity name as in /system identity set name="some other name" The above command doesn't crash my hAP ac² ... running ROS 6..43. Yes. I have problem with this...

Changing the identity on hAp ac² crashes the router with an error: "kernel failure in previous boot".

Where can I downloadbtest.exe?