MikroTik - Search

raystream

Port Flapping on RB3011.
great now i am trying to get around but the suggested workaround is not working for me.

that is not really a stable release.
the statement: improved arm stability is wrong.

never had such a bad update from mikrotik.

will go back to long term version

raystream

Hello,

on the RBM11G are two 2x5 pin headers.
does anybody know what signals are routed to this headers?

1340_hi_res.png

Perhabs USB? would be great to have the lora8 card in the mpcie slot and an other usb slot for a lte stick.

regards, Bjoern

raystream

i dont need WiFi or many RJ45.
What i need is a powerfull router with min. 2x SFP+

let the router be a router and nothing more

raystream

I have made a feature request back in april 2020

No response.

I like the mikrotik products but service and support could be improved.

raystream

Hello mikrotik ?!?

any infos about that?

raystream

@floatly if a given functionality like the one i am asking for is not working as intended i am not in the NOWHINING zone. But if no one here or from mikrotik can help i have to by LoRaWAN gateways from an other supplier. i am working with mikrotik in the router section for years now and i am happy w...

raystream

Hi

is there a 48port switch from mikrotik without a fan?

if the CRS354-48G-4S+2Q+RM is without fan it would be great.
if not i have to buy another CSS326-24G-2S+RM and will interconnect them with 10G but having only one switch ist much better for management.

raystream

i am using several RBM33G with LoRa8 and LTE card without problems.

you have to set a jumper to route the USB2.0 lines to the second PCIe slot

raystream

Hi

i have a RBM33G here with an LTE and LoRa8 card.
i would like to add a GPS because the LTE card does not have GPS integrated.

But when using the LTE and LoRa card the USB port is only USB3.0 .

How can i add a GPS? perhabs via the serial port?

raystream

Hi i have several LoRaWAN gateways with the lora8 concentrator board. i have more than one server configured: Capture.PNG data of test node with ABP auth is send to all 3 servers after startup of the gateway. after a while (some hours) data is only send to the first server configured, the second and...

raystream

can anyone from mikrotik give me an answer?

raystream

Hello,

will the new TCP based packet forwarder for LoRa be implemented?
or even the Semtech Basic Station protocol?

the standard UDP based packer forwarder is totally outdated and can produce a high rate of packet loss.

regards, Bjoern

raystream

Not a tower but our new rack for now 12 private lora networks and development. Not completed right now, the core router is still in the old rack and it needs to be patched completely new, but a start. http://download.wasn.eu/pics/rack_closed.jpg http://download.wasn.eu/pics/rack_open.jpg http://down...

raystream

都是谈论10 g和更多。但是嘿,意图listic i am living in germany and i am happy to get 50/25 VDSL. I can buy a 100/50 VDSL but what for? the DSLAM is too far away that i would only get about 80/30. 10G for a home is fine but could the provider give that full 10G to you if there are mo...

raystream

have anybody an idea why these timeouts happen?

raystream

Hi, i have several LoRa Gateways out there. Most of them are RBM33G with an LTE and LoRa8 card from mikrotik, some are WAP R mit LoRa8 cards. All Getways are on routerOS ver 6.46.2 and the LTE cards on v013 Both configurations have the same problem: LoRa_Timeouts.PNG why do i see so much timeouts fo...

raystream

Just wanted to be shure.
There were products which fearures that were not mentioned before.

raystream

Hi

Does the WAP AC LTE have poe out on the second ethernet?

raystream

The rbm33g works without problems.

Use the right slot for the lora8 cqrd and dont forget to set the jumper for routing the usb 2.0 to the slot and not to the usb connector.

raystream

When wilkl the lora package be available for the mmips based devices like ltap or RBM33G?
These would be the perfect devices with the lora and an lte card

raystream

I really would like to use the lora8 card in a ltap together with the r11-lte but no support for mmips buy now.

When will the lora package be available for the mmips CPUs (ltap and rbm33g)?

raystream

I installed the latest stable 6.4.56. And the RBM33G was running fine.
Then i installed the latest Beta 6.46beta44.
After the install has finished the RBM33G is stuck in a reboot loop.

raystream

after installing the latest beta to a RBM33G the RB is stuck in a reboot loop.
only netinstalling with the latest stable brought it back to life.

raystream

Hi

i have read about the GPEN21 in the MUM presentation.

When can i buy it?

raystream

you can set the package source in the gui AND in the terminal:

/system upgrade upgrade-package-source

here you can add your server where you have dowloaded all packeges to

raystream

or you can use a Woobm USB Stick from mikrotik
you can connect wireless to that stick and use the serial console over web or telnet.

raystream

i have found the failure.
connecting with the android app over vpn (i am not at home) is fine.
connecting with winbox from my windows laptop over vpn is fone too.

only winbox running with wine on my macbook shows this failure
and after deleting the cache in winbox it connects again on my macbook

raystream

actual winbox version 3.18

i connected with that winbox version to start the upgrade and after the upgrade the failure happens

raystream

向上grade 6.44.3 -> 6.45.1

on my hAP ac lite and on RB2011iL all went fine.

but i have a problem with my RB3011.
I can not login anymore with winbox ("wrong username or password").
All other services are disabled so only connection with winbox possible.

raystream

can anybody please help and give me a hint?

i need to get this setup up and running.

raystream

here is the export: i have WAN1 on eth1, WAN2 on eth2 and an unifi AP on eth10. The users connecting over the AP should be routed over the hide.me VPN you can ignore the KVP VPN connection this is only for administration from our main office. # jun/24/2019 14:40:52 by RouterOS 6.44.3 # software id =...

raystream

你好我用mikrotikwiz雷竞技网站ard创建一个配置to load balance 2 WAN connections. now i have setup a vpn connection and it connects. but how do i set that all traffic coming from clients go through the VPN connection? i have setup that before but only with 1 WAN connection. please help me. that is...

raystream

Hello

i am trying to install router os on a cf card with netinstall.
I have netinstall started as adminstrator.
After clicking install i get the error "Cannot MBR on device".

what am i making wrong?

raystream

i know that guide.
But netinstall is not working as written in my starting post.

raystream

how can i do a software upgrade after installing your ha sytem?

Just update the primary and then the secondary goes active when the primary reboots
after that upgrade the second one

will the patch be still there after upgrade?

raystream

Hi after updating my mAP lite to the actual routerOS version the ethernet port stopped working. Wireless is working but the ethernet port only auto negotiate on 10M full duplex without any traffic going trough the port. i tried updating it to the actual beta and upgrading the routerboard firmware wi...

raystream

better scenario:

[Router](RJ45) ------ (RJ45)[POWERLINE DEVICE]---(230V socket) ====== (230V socket)[new mikrotik POWERLINE DEVICE](microUSB) ---[mAP lite] ~~~ ~~~ [PC]

good to get an AP running in a place without ethernet cable connection.

raystream

yes just buy a POE injector for each AP.

raystream

Hi

the CRS326-24G-2S has no POE.
so no power over ethernet.
If you need a 24port Switch with POE you should have bought a CRS328-24P-4S+RM

The difference is the P behind the port count.

raystream

dont think this concept will work.
what i would like to see is a "port expander":
a Master Switch with all the intelligence and 1 or 2 Expand-Ports
a Expander with 24 or 48 Ports without intelligence

Just expand the port count without the need to manage another switch (nexus like)

raystream

you cant just copy the image to a disk. it is a container for the hypervisor and uses only virtual devices without drivers for the baremetal server. But you are talking about using a server with so much cores and ram and cant afford an esc licence for around 800€ per CPU? The Server is abaout 3000€ ...

raystream

the RB3011 is runnning version 6.43.4

raystream

Hello, i have changed my RB750Gr3 to an RB3011. Everything is working fine but i have Problems with the ip cloud. The RB3011 is behind an FritzBox (NAT). The output of /ip cloud print is ddns-enabled: yes update-time: yes dns-name: ???.sn.mynetname.net status: updating... ??? ist only a placeholder ...

raystream

to make a suggestion there is more information needed: - what bandwidth is your ISP providing? - what bandwidth would you like to get on the site C - any firewall filters first i think you do not need 2 mikrotik devices just get an hap ac2 but we need to know the answers to the questions above to gi...

raystream

i dont see the lte modem under ports, but using the following command in cli can send sms: [admin@MikroTik] /tool sms> send phone-number=5551234567890 message=test port=lte1 set port=lte1 before the send does not help i have to give the port argument with the send command. Sending sms ist only possi...

raystream

you can power cycle only the USB port without power cycling the device where the woobm ist connected to.

just go to: System -> Routerboard there you can use the "USB Power Reset" button

raystream

The standard edition and the dude edition are nearly the same.
the only difference is that the dude edition have the sata and m2 connectors populatet on the pcb.

raystream

can you show your rack mount adapter?
the indicators are very interesting.

yes, currently i'm travelling but on the weekend i'll take some pictures.

hi yould be great to get some pictures.
perhabs i can buy adapter from you or you can tell me how to build one by myself?

raystream

i would like to mount my RB750Gr3 and my RB260GSP in my 19" rack.
there are some solutions (balticnetworks and wisp.pl) but they have extrem high shipping cost for shipping to germany.

is there a distributor in germany?

raystream

How about RM(rackmount) version of Hex? You could use a tray and put a few of those little rascals side by side. ;-) we built a rack-mount kit that accommodates 2 of them and has lights-out to make the link/activity indicators visible even if the devices are tightly stacked on top of each other. ca...

raystream

please help i would like to use an external usb or serial LCD on my CCR-1009-8G-1S that has no internal touchsreeen

raystream

i have the same problem with my CCR-1009-8G-1S.
@mikrotik: is this how it should be?

raystream

i have a CRS109 with inbuild touchscreen. on this device i can install the lcd package for the mibsbe from the all packages file but in the all packages file for the tile devices there is no lcd package. so no system/LCD menu for my CCR-1009 is there a LCD package for USB LCD for the devices with ti...

raystream

i dont have a lcd menu unter system on my ccr-1009-8G-1S
only the one for the touchscreen in the root menu

raystream

i dont want the touchscreen.
all i want is to connect a lcd like a crystalfontz cfa635 i have connected to other routerboards.

raystream

as i understand there is no possibility to use another display as the touchscreen that is built in the newer devices.
thought i can use an USB or Serial Display like on the Routerboards.

raystream

i know that the internal LCD are not connected via USB.

But my CCR1009 has no internal Display and i would like to add one.
I need the LCD package from the other devices.

raystream

nobody can help?

raystream

Hello

i have a ccr1009 without touchscreen here.
now i would like to use an external LCD.

The installed LCD package only let me configure a touchscreen i dont have.
i would like to configure the interface the external LCD is connected to.

thanx

raystream

i now wrote a script that will man an dns lookup of the DNS name from the CAPsMAN controller and then writes the IP to the CAPs settings. the script only updates the IP in the setting when it has changed. :local DNSNAME caps.xxx.de :global previousIP :local currentIP [:resolve $DNSNAME] if ($previou...

raystream

Hello i have a problem. My CapsMan Controller is on an internet line with a dynamic ip (i get a new ip every 24hours) now i would like to use the controller for CAPs on other internet lines. I have set the CapsMan Addresses field to the actual dynamic IP of my Controller and the CAP ist connecting a...

raystream

after setting the snmp protocol to v2c i get port stats

raystream

Hi

我想读的Port Stats with snmp to visualise in the dude.
all i get with snmp in dude is the mac address table and the uptime
the RB260HSP is running SwOS 2.7

is there a way to get the other data?

thanx

raystream

I know not using a mesh is better
But i cannot run cables in the location

raystream

Hello i am trying to build up the following szenario: i have a RB750Gr3 as Router with an RB260GSP as switch behind. i have a hAP ac lite connected to the switch. the 2.4GHz WLAN of the hAP is configured via Capsman on the RB750Gr3. now i would like to have a wireless mesh on the 5GHz WLAN betwenn t...

raystream

a new install with netinstall solved the problem

raystream

Hello,

i set my hAP Lite to CAP mode to test the CAPsman config.
After reseting it back to factory setting there is no WLAN interface showing up and in QuickSet i have only the ethernet option.

How can i get the WLAN Interface back?

best regards

raystream

Hello i would like to use the LEDs on my alix 2d13 board to show activity and status of my vpn connection. this is the info i have about the LEDs: LED2 (middle) GPIO G25 Read port 06180h bit 9 write port 06180h bit 9 / 25 LED3 (right) GPIO G27 Read port 06180h bit 11 Write port 06180h bit 11 / 27 Ho...

Search found 68 matches