Why any mikrotik authority is not replying here ?

Same problem here,

Hi Experts
I want to install Omnitik 5 poe ac on mobile tower and power on the 4 mant box sector simultaneously. As mobile tower available 48v direct power from power bank.
Can we use direct 48v power to power up the Omnitik or any additional adaptor required for the same ?
Thanks in advance !

I am also facing the same problem, please let me know how to find out the bad packets coming from the customer.

Will it work when mikrotik device is in bridge mode and not able to access internet ?

你好朋友,我在新Mikrotik。雷竞技网站我们有3个mikro雷竞技网站tikAP's. & from the last few days all my wireless clients getting slow speed & packet drops in the day time. I checked Tx/Rx CCQ value but not more difference between day & night. 1- What is the parameters to resolve this kind of issues ? 2...

Try using The Dude works very good and gives you alot of options if you have just mikrotik devices.

In above network scenario, can we install the dude pakage into the mantbox sector ?
Or i need to add another kind of mikrotik device ?

Sent from my RMX1901 using Tapatalk

Use any SNMP application! I use Observium, also LibreNMS is a option!

Thanks

Sent from my RMX1901 using Tapatalk

Hi All, There are 3 Mant box sector configured as Wisp Ap, Bridge mode and approx 30 station's connected on each sector. All station's are mikrotik configured as station bridge. How i can monitor all my network. Please guide. https://uploads.tapatalk-cdn.com/20200416/9058be33257f88ea72703dedb9525fe4...

I powered on the sector with basebox 5 & Omnitik Poe ac. Country is lock down so can't purchase the right product.

Sent from my RMX1901 using Tapatalk

a couple of installations, lhg5 and omnitik 5 poe.

Is it telescopic pipe ?
and how long is it.

Sent from my RMX1901 using Tapatalk

As u see in AP. total 18 clients are connected. So sometimes all 13-14 clients packet drop simultaneously, sometimes remaining clients packet drop. this is happening every 2-3 minutes.

Sent from my RMX1901 using Tapatalk

Hi All, Since few month approx 20 clients connected to the Omnitik and working fine, Suddenly getting packet loss. i observe that TX/RX rate are too low. then i changed the channel width, frequency, one by one block all clients to find out the issues. but nothing happened. this problem arises in the...

Started out using mantboxes and now completely stopped using them and started using whatever degree I need Ubiquiti sectors with a Basebox or Netbox attached. They work 100% for low interference environments but once you start scaling up a site, interference issues start. (same as the dude above) A...

I am using 2 mantbox 19s , Ther are two mobile tower besides my office, So i placed mantbox on both tower, each one. Without any high power, both mantbox and their poe had burnet and melted.That time weather was fine, no lightning ther. Although their 24 volt adaptors is working fine. One sector was...

we have to install one omnitik poe and two mantbox sector on tower. so maximum length of cat 5e is 135 mtr from office to devices, will it work or need to add something else ?

Sent from my RMX1901 using Tapatalk

那么什么是推荐的信号,和什么do to resolve the same ?

Sent from my RMX1901 using Tapatalk

Use nv2 or nstreme

in nstreme, latency continuously high aprox 50-80ms when pinging to ap.
with nv2 same result as 802.11.

Sent from my RMX1901 using Tapatalk

ubnt clients also connected to the same AP, so using 802.11.

Sent from my RMX1901 using Tapatalk

Hi mikrotik expert,I am using mikrotik sector 120 mantbox, Ther are only 10-12 clients connected with good signals still high latency with the packet loss of all clients together. Plz see the screenshots and help me.

As you told that you on 9th CPE and you face packet loss issue,The same problem i had faced, I am using 2 AP, Omnitik and 120 degree mantbox sector, As one of my user access pirated software website using proxy all cpe which is connected to the same ap more than 78 signal on ap side suddenly face pa...

Inside rack

The grasshopper is only one hop away

Sent from my cell phone. Sorry for the errors.

[emoji23]

Sent from my 2014818 using Tapatalk

I have a omnitik, it takes too much time to appear in winbox, how to resolve ? please help !

Sent from my 2014818 using Tapatalk