What's new in 7.12rc2 (2023-Oct-16 17:50):
*）bridge - fixed bridge host ageing timeout behaviour (introduced in 7.12beta8);
*）led - fixed CRS312 Ethernet port LED functionality (introduced in 7.12rc1);
*）led - fixed 5G modem mobile network category LED colours;
*）ospf - fixed OSPFv3 authentication header length calculation;
*）pimsm - fixed BSR update process;
*）pimsm - fixed UIB update process;
*）qsfp - fixed incorrect QSFP temperature readings in negative temperature;
*）route - fixed VRF functionality on devices where "single-process" routing process mode is enabled (introduced in 7.12rc1);
*）sfp - fixed link establishment after forced speed changes for RB4011 and CCR2004-16G-2S+ devices (introduced in 7.12rc1);
*）sfp - fixed link establishment with passive copper cables for RB4011 and CCR2004-16G-2S+ devices (introduced in 7.12rc1);
Other changes since v7.11:
!) ethernet - changed "advertise" and "speed" arguments, and removed "half-duplex" setting under "/interface ethernet" menu;
!) health - removed "temperature" health entry from boards, where it was the same as "sfp-temperature";
!) sfp - convert configuration to support new link modes for SFP and QSFP type of interfaces;
*）api - fixed fetching objects with warning option from REST API;
*）bfd - fixed sessions when setting VRF;
*）bfd - improved system stability;
*）bgp - fixed "atomic-aggregate" always set in output;
*）bgp - fixed "input.filter-chain" argument selection in VPN configuration;
*）bgp - fixed local and remote port settings for BGP connections;
*）bgp - fixed typos and missing spaces in log messages;
*）bgp - implemented IGP metric sending in BGP messages;
*）bgp - improved logging;
*）bgp - increase "hold-time" limit to 65000;
*）bluetooth - added basic support for connecting to BLE peripheral devices;
*）bluetooth - use "g" units when decoding MikroTik beacon acceleration on peripheral devices menu;
*）bridge - fixed fast-path forwarding with HW offloaded vlan-filtering (introduced in v7.11);
*）bridge - fixed untagged VLAN entry disable;
*）bridge - fixed vlan-filtering stability with HW and non-HW offloaded ports (introduced in v7.10);
*）bridge - improved system stability;
*）bridge - improved vlan-filtering bridge stability with CAPsMAN (introduced in v7.11);
*）calea - improved system stability when trying to add rules without the CALEA package;
*）certificate - allow to get and maintain Let's Encrypt certificate in IPv6 environment;
*）certificate - allow to remove issued certificates when CRL is not used;
*）certificate - fixed "subject-alt-name" duplicating itself when SCEP is used;
*）certificate - fixed certificate auto renewal via SCEP;
*）certificate - improved certificate validation logging error messages;
*）certificate - log CRL HTTP errors under the "error" logging topic;
*）chr - iavf updated driver to 4.9.1 version;
*）chr - increased OVA default RAM amount from 160MB to 256MB;
*）console - added ":jobname" command;
*）console - added "as-string" and "as-string-value" properties for "get" command;
*）console - added "terminal/ask" command;
*）console - added "transform" property for ":convert" command;
*）console - export required properties with default values;
*）console - fixed scheduler "on-event" script highlighting when editing;
*）console - improved ":totime" and ":tonum" commands and added ":tonsec" command for time value manipulation;
*）console - improved multi-argument property parsing into array;
*）console - improved randomness for ":rndstr" and ":rndnum" commands;
*）console - improved stability and responsiveness;
*）console - improved stability when editing long scripts;
*）console - improved stability when using "special-login";
*）console - improved system stability through RoMON session;
*）console - improved system stability when using autocomplete;
*）console - improved system stability;
*）console - restrict permissions to "read,write,reboot,ftp,romon,test" for scripts executed by DHCP, Hotspot, PPP and Traffic-Monitor services;
*）console - show full date and time in scheduler "next-run" property;
*）dhcp - fixed DHCP server "authoritative" and "delay-threshold" settings (introduced in v7.12beta3);
*）dhcp - fixed DHCP server and relay related response delays;
*）email - rename "address" property to "server";
*）ethernet - added "supported" and "sfp-supported" values for "monitor" command;
*）firewall - added "ein-snat" and "ein-dnat" connection NAT state matchers for filter and mangle rules;
*）flash - show more accurate "total-hdd-space" resource property;
*）gps - expose GPS port for Quectel EM12-G (vendor-id="0x2c7c", device-id="0x0512");
*）ike1 - fixed invalid key length on phase1 negotiation;
*) ike1——日志non-RSA键时一个错误used;
*）ike2 - improved rekey collision handling;
*）在terface - added "macvlan" interface support;
*）iot - fixed an issue where applying a script to GPIO pin caused GPIO to stop working;
*）iot - fixed behavior where GPIO output state would change on boot;
*）ipsec - fixed Diffie-Hellman public value encoding size;
*）ipsec - fixed IPSec policy when using modp3072;
*）ipsec - fixed minor typo in logs;
*）ipsec - reduce disk writes when started without active configuration;
*）ipv6 - fixed IPv6 RA delay time from 5s to 500ms according to RFC;
*）ipv6 - send RA and RA deprecate messages out three times instead of just once;
*）l3hw - fixed IPv6 route suppression;
*）l3hw - improved system stability during IPv6 route offloading;
*）l3hw - prioritize local IP addresses over the respective /32 and /128 routes;
*）led - fixed "interface-status" configuration for virtual interfaces;
*）leds - added "dark-mode" functionality for RBwAPG-5HacD2HnD;
*）leds - added "wireless-status" and "wireless-signal-strength" configuration types for wifiwave2 interfaces;
*）leds - fixed "wireless-status" and "wireless-signal-strength" for wireless interfaces (introduced in v7.12beta7);
*）log - improved logging for user actions;
*）lora - added LNS protocol support;
*）lte - added SINR reporting for FG621-EA modem;
*）lte - added at-chat support and increased wait time on modem at-chat for Dell DW5821e, DW5821e-eSIM, DW5829e and DW5829e-eSIM;
*）lte - changed R11e-LTE ARP behavior to NoArp;
*）lte - fixed 5G data-class reporting for Chateau 5G;
*）lte - fixed APN authentification in multi APN setup for R11e-LTE6;
*）lte - fixed IPv6 prefix for MBIM modems in multi-apn setup when IPv6 APN used as not first APN;
*）lte - fixed RSSI for FG621-EA modem to show the correct value;
*）lte - fixed Sierra modem detection for modems with vendor-specific USB descriptors;
*）lte - fixed Sierra modem initialization;
*）lte - fixed startup race condition when SIM card is in "up" slot for LtAP mini;
*）lte - fixed sub-interface auto-removal in multiple APN setups;
*）lte - show correct data class when connected to 5G SA network;
*）lte - use more compact logging messages;
*）modbus - added additional security settings for Modbus TCP;
*）mpls - added option to match and set MPLS EXP with bridge and mangle rules;
*）mpls - fixed "propagate-ttl=no" setting;
*）mpls - improved FastPath next-hop selection hash algorithm;
*）mqtt - added on-message feature for subscribed topics;
*）mqtt - added parallel-scripts-limit parameter to set maximum allowed number of scripts executed at the same time;
*）mqtt - added wildcard topic subscription support;
*）netinstall - added option to discard branding package;
*）netinstall - display package filename in GUI Description column if package description is not specified;
*）netinstall-cli - added empty configuration option "-e";
*）netinstall-cli - added option to discard branding package;
*）netinstall-cli - allow ".rsc" script filenames;
*）netinstall-cli - prioritise interface option over address option;
*）netinstall-cli - updated configuration option description;
*）netwatch - decreased "thr-tcp-conn-time" maximum limit to 30 seconds;
*）ospf - fixed BFD on virtual-link with configured VRF;
*）ospf - fixed OSPFv3 not working with NSSA areas;
*）ospf - fixed adding ECMP routes;
*）ospf - fixed parsing of opaque LSAs used by TE;
*）ospf - fixed translated NSSA routes not showing in backbone;
*）ovpn - added "tls-auth" option support for imported .ovpn profiles;
*）ovpn - improved system stability;
*）pimsm - improved system stability;
*）poe-out - driver optimization for AF/AT controlled boards;
*）poe-out - fixed rare CRS328 poe-out menu and poe-out port config loss after reboot;
*）poe-out - improved "auto" mode for devices with single PoE-out port;
*）port - add support for Huawei MS237h-517;
*）port - expose NMEA/DIAG ports for Dell DW5821e and DW5821e-eSIM;
*）qsfp - added 50Gbps rate support for QSFP28 interfaces;
*）qsfp - fixed sub-interface EEPROM monitor data output (introduced in v7.12beta3);
*）qsfp - improved auto link detection for 100G CWDM4 modules and AOC cables (introduced in v7.12beta3);
*）qsfp - improved auto link detection for AOC cables;
*）qsfp - use sub-interface configuration for establishing link (for 40Gbps and 100Gbps links, all sub-interfaces must be enabled);
*）quickset - fixed "LAN" interface list members if configuration does not contain bridge;
*）rip - added BFD support;
*）rip - fixed session not working in VRF;
*）route - added "single-process" configuration setting, enabled by default on devices with 64MB or less RAM memory;
*）route - added "suppress-hw-offload" setting for IPv6 routes;
*）route - fixed gateway after link restart;
*）route - removed deprecated "received-from" property;
*）route - reverse community "delete" and "filter" command behavior;
*）routerboard - added "reset-button" support for RB800, RB1100 and RB1100AHx2 devices;
*）sfp - added 5Gbps rate for SFP+ interface on 98DX224S, 98DX226S, and 98DX3236 switch chips;
*）sfp - fixed 25Gbps link with FEC91 (introduced in v7.12beta7);
*）sfp - fixed failed auto-negotiation for RB5009 devices (introduced in v7.12beta3);
*）sfp - fixed missing "rx-power" monitor with certain modules (introduced in v7.10);
*）sfp - improved interface stability for SFP and QSFP types of interfaces;
*）sfp - improved system stability with certain modules for 98DX224S, 98DX226S, 98DX3236, 98DX8216 and 98DX8208 switch chips;
*）snmp - changed "mtxrGaugeValue" type to integer;
*）ssh - added support for user ed25519 public keys;
*）ssh - allow to specify key owner on import;
*）ssh - fixed SSH tunnel performance (introduced in v7.10);
*）ssh - improved connection stability when pasting large chunks of text into console;
*）supout - added LLDP power to supout.rif;
*）supout - added interface list members section;
*）supout - fixed BFD section;
*）switch - fixed packet forwarding between Ethernet ports for CRS354 switches (introduced in v7.12beta7);
*）switch - improved resource allocation for 98DX224S, 98DX226S, and 98DX3236 switch chips;
*）switch - improved switch chip stability for CCR2004-16g-2s+ devices;
*）system - improved system stability when MD5 checksums are used;
*）tftp - fixed empty file name matching;
*）tile - improved system stability when using queues;
*）traffic-generator - added "priority" property for "inject" command;
*）traffic-generator - fixed traffic-generator on CHR and x86;
*）usb - added support for RTL8153 USB ethernet on ARM, ARM64 and x86;
*）vrf - limit maximum VRFs to 1024;
*）vxlan - improved system stability for Tile devices;
*）webfig - fixed "Days" property configuration change under "IP/Firewall" menu;
*）webfig - fixed interface addition (introduced in v7.12beta7);
*）webfig - fixed timezone for interface "Last Link Down/Up Time";
*）webfig - improved Webfig performance and responsiveness;
*）webfig - try to re-establish connection after disconnect;
*）wifiwave2 - added an alternative QoS priority assignment mechanism based on IP DSCP;
*）wifiwave2 - added comment property for registration-table;
*）wifiwave2 - added station-bridge interface mode;
*）wifiwave2 - correctly add interface to specified "datapath.interface-list";
*）wifiwave2 - do not show default "l2mtu" on compact export;
*）wifiwave2 - enable changing interface MTU and L2MTU;
*）wifiwave2 - fixed PTK renewal for interfaces in station mode;
*）wifiwave2 - fixed malformed Interworking packet elements;
*）wifiwave2 - fixed re-connection failures for 802.11ax interfaces in station mode;
*）wifiwave2 - fixed sniffer command not receiving any QoS null function frames when using 802.11ax radios;
*）wifiwave2 - fixed untagged VLAN 1 entry when using "vlan-id" setting together with vlan-filtering bridge;
*）wifiwave2 - fixed warning on CAP devices when radar detected;
*）wifiwave2 - implemented an option to transmit IP multicast packets as unicasts;
*）wifiwave2 - improved compliance with regulatory requirements;
*）wifiwave2 - limit L2MTU to 1560 until a fix is available for a bug causing interfaces to fail transmitting larger frames than that;
*）wifiwave2 - list APs with a higher maximum data rate as more preferable roaming candidates;
*）wifiwave2 - log more information regarding authentication failures;
*）wifiwave2 - make 4-way handshake procedure more robust when acting as supplicant (client);
*）wifiwave2 - use CAPsMAN's "datapath.vlan-id" on CAP for bridge port "pvid";
*）winbox - added "Addresses" property under "Routing/BFD/Configuration" menu;
*）winbox - added "BUS" property for USB Power Reset button for LtAP-2HnD and CCR1072;
*）winbox - added "Comment" under "Routing/BFD/Configuration" menu;
*）winbox - added "Host Key Type" setting under "IP/SSH" menu;
*）winbox - added "Key Owner" setting under "System/User/SSH Keys" and "System/User/SSH Private Keys" menus;
*）winbox - added "Name Format" property under "WifiWave2/Provisioning" menu;
*）winbox - added "Remote Min Tx" parameter under "Routing/BFD/Session" menu;
*）winbox - added "Startup Delay" setting under "Tools/Netwatch" menu;
*）winbox - added "USB" button under "System/RouterBOARD" menu for LtAP-2HnD;
*）winbox - added "Use BFD" setting under "Routing/RIP/Interface-Template" menu;
*）winbox - added "g" flag under "IPv6/Routes" menu;
*）winbox - added Enable/Disable button under "Routing/RIP/Static Neighbors" menu;
*）winbox - added MQTT subscription menu;
*）winbox - added missing properties under "WifiWave2" menu;
*）winbox - allow to change port numbers for SCTP, DCCP, and UDP-LITE protocols under "IP/Firewall" menus;
*）winbox - allow to set multiple addresses and added IPv6 support under "Interface/VETH" menu;
*）winbox - allow to specify server as DNS name under "Tools/Email" menu;
*）winbox - changed "MBR Partition Table" checkbox to unchecked by default under "System/Disks/Format-Drive" menu;
*）winbox - do not show "F" flag for disabled entries under "IP/Routes" menu;
*）winbox - fixed "Address" property under "WifiWave2/Remote-CAP" menu;
*）winbox - fixed "Do" property under "Routing/Filters/Select Rule" menu;
*）winbox - fixed "Group Key Update" maximum value under "WifiWave2/Security" menu;
*）winbox - fixed "Range" property under "Routing/Filters/Num Set" menu;
*) winbox——CCR2004-16G-2S固定“切换”菜单+;
*）winbox - fixed entry numbering and ordering under "WifiWave2/Provisioning" menu;
*）winbox - fixed minor typos;
*）winbox - improved support for certain properties under "WifiWave2/Interworking Profiles" menu;
*）winbox - rename "DSCP" setting to "DSCP (+ECN)" under "Tools/Traffic-Generator/Packet-Templates" menu;
*）winbox - rename "Name" setting to "List" under "IP,IPv6/Firewall/Address-List" menu;
*）winbox - rename "Password" button to "Change Now" under "System/Password" menu;
*）winbox - show "unknown" value for "FS" property under "System/Disks" menu if the data is not available;
*）wireguard - added "auto" and "none" parameter for "private-key" and "presharde-key" parameters;
*）wireguard - added "wg-export" and "wg-import" functionality (CLI only);
*）wireguard - allow to specify client settings under peer menu which will be included in configuration file and QR code;
*）wireguard - request public or private key to be specified in order to create peer;
*）wireless - added more "radius-mac-format" options (CLI only);
*）wireless - fixed malformed Interworking packet elements;
*）www - fixed allowed address setting for REST API users;
*）www - fixed fragmented POST data for SCEP service;
*）x86 - Realtek r8169 updated driver;
*）x86 - added support for Mellanox ConnectX-6 Dx NIC;
*) x86 - i40eupdated driver to 2.23.17 version;
*）x86 - igb updated driver to 5.14.16 version;
*）x86 - igbvf updated driver from in-tree Linux kernel;
*）x86 - igc updated driver to 5.10.194 version;
*）x86 - ixgbe updated driver to 5.19.6 version;
*）x86 - updated latest available pci.ids;
Changelog archive
×
